Core type transformers have, LV and HV windings are arranged such that _________(a) Half LV near the core and half HV outside LV on each limb(b) LV one one limb and HV on the other(c) Half LV outside the core and half HV inside LV on each limb(d) LV and HV windings are sandwichedI have been asked this question during an internship interview.Question is from Transformer Construction in section Transformers of Electrical Machines

Core type transformers have, LV and HV windings are arranged such that

1.	Core type transformers have, LV and HV windings are arranged such that _________(a) Half LV near the core and half HV outside LV on each limb(b) LV one one limb and HV on the other(c) Half LV outside the core and half HV inside LV on each limb(d) LV and HV windings are sandwichedI have been asked this question during an internship interview.Question is from Transformer Construction in section Transformers of Electrical Machines
Answer» RIGHT CHOICE is (a) Half LV near the CORE and half HV OUTSIDE LV on each limb The explanation is: Core windng has first of all both the windings on the same limb and HV is placed outside to have TAPPINGS to the transformer.

Discussion

No Comment Found

Related InterviewSolutions

If the per unit leakage impedance for the primary of a transformer is ‘x’ on the given rated base value. If the voltage and volt-amperes are halved, then the changed per unit impedance will be ___________(a) 0.5x(b) 2x(c) 4x(d) xThis question was addressed to me during a job interview.The query is from Voltage Regulation of Transformer topic in chapter Transformers of Electrical Machines
The voltage regulation fortransformer is given by ___________(a) (E2-V2)/E2(b) (E2-V2)/V2(c) (V2-E2)/E2(d) (V2-E2)/V2The question was posed to me in semester exam.I need to ask this question from Voltage Regulation of Transformer in section Transformers of Electrical Machines
Two tranformer having same voltage but different KVA are operating in parallel. For a good load sharing __________(a) impedance must be equal(b) pu impedances must be equal(c) pu impedance and X/R ratios must be equal(d) impedance and X/R ratios must be equalThis question was posed to me during an internship interview.I need to ask this question from Autotransformers topic in division Transformers of Electrical Machines
When a transformer winding suffers a short circuit, then inter turns of the same winding experience ______ forces.(a) an attractive(b) a repulsive(c) no force(d) may be attractive or repulsive typeThe question was posed to me in an internship interview.This interesting question is from Autotransformers in portion Transformers of Electrical Machines
In a transformer, we place the tapping windings at the middle because __________(a) of radial forces on the windings(b) axial forces on the windings(c) insulation level of the winding(d) to provide a mechanical balance to the windingsI got this question during an interview for a job.I'm obligated to ask this question of Autotransformers in portion Transformers of Electrical Machines
The tappings on the transformers is provided on __________(a) h.v side at one end of the winding(b) l.v. side at one end of the winding(c) h.v side at middle(d) l.v side at middleI had been asked this question in my homework.My question is based upon Autotransformers topic in section Transformers of Electrical Machines
If a transformer is at no load, then it will act like __________(a) a resistor at p.f = 0(b) an inductive reactor at 0.2 lagging(c) a capacitive reactor at0.2 leading(d) an inductive reactor at 0.8 laggingThe question was asked in examination.The above asked question is from Autotransformers in section Transformers of Electrical Machines
A 1-phase tranformer has a leakage impedance of 1+ j4 Ω for primary and 3+ j11 Ω for secondary windings. This transformer has __________(a) H.V primary(b) Medium voltage primary(c) L.V primary(d) L.V secondaryI got this question in an international level competition.This is a very interesting question from Autotransformers topic in chapter Transformers of Electrical Machines
Maximum efficiency of a transformer for a constant load current, occurs at __________(a) at any p.f(b) zero p.f leading(c) zero p.f lagging(d) unity p.fThis question was addressed to me during an interview for a job.My question comes from Autotransformers topic in chapter Transformers of Electrical Machines
Three transformers having identical dimensions but with core of iron, aluminium and wood are wound with same number of turns and have same supply. Then choose the order for eddy current losses.(a) wood > aluminium > iron(b) aluminium > iron > wood(c) iron > wood > aluminium(d) iron > aluminium > woodThe question was asked in a national level competition.My question is taken from Autotransformers topic in portion Transformers of Electrical Machines

Discussion

No Comment Found

Related InterviewSolutions

Reply to Comment