How should the permeability and number of ampere turns for good magnetic materials be?(a) high permeability, high ampere turns(b) high permeability, low ampere turns(c) low permeability, low ampere turns(d) low permeability, high ampere turnsThe question was posed to me in an online interview.The above asked question is from Magnetic Materials in chapter Electrical Engineering Materials of Design of Electrical Machines

How should the permeability and number of ampere turns for good magnet

1.	How should the permeability and number of ampere turns for good magnetic materials be?(a) high permeability, high ampere turns(b) high permeability, low ampere turns(c) low permeability, low ampere turns(d) low permeability, high ampere turnsThe question was posed to me in an online interview.The above asked question is from Magnetic Materials in chapter Electrical Engineering Materials of Design of Electrical Machines
Answer» CORRECT option is (b) high PERMEABILITY, low ampere turns For explanation I would say: High permeability is always REQUIRED in magnetic materials for its good OPERATION. At the same time high permeability leads to LESS ampere turns in the materials.

Discussion

No Comment Found

Related InterviewSolutions

Which among the following is the example of Class B?(a) Inorganic material with adhesives(b) Hard fiber(c) Wood(d) Impregnated oilThis question was addressed to me during an interview.I'm obligated to ask this question of Temperature Rise and Insulating Materials topic in chapter Electrical Engineering Materials of Design of Electrical Machines
Which among the following is the example of Class Y?(a) Varnish(b) Insulation oil(c) Paper(d) ResinsThe question was posed to me by my college director while I was bunking the class.This key question is from Temperature Rise and Insulating Materials in chapter Electrical Engineering Materials of Design of Electrical Machines
Which among the following is an example of Class F?(a) Paper lamination(b) Nitrile rubber(c) Asbestos(d) SiliconeI had been asked this question during an interview.Asked question is from Temperature Rise and Insulating Materials in section Electrical Engineering Materials of Design of Electrical Machines
Silicone rubber is an example of Class H.(a) True(b) FalseThis question was addressed to me in an international level competition.My question is taken from Temperature Rise and Insulating Materials in section Electrical Engineering Materials of Design of Electrical Machines
How many classes have their temperatures above 150°C?(a) 2(b) 3(c) 4(d) 5I got this question during an interview.I'm obligated to ask this question of Temperature Rise and Insulating Materials topic in portion Electrical Engineering Materials of Design of Electrical Machines
Which class has the lowest and the highest temperature?(a) Class Y, Class C(b) Class Y, Class H(c) Class H, Class C(d) Class B, Class HThe question was asked in my homework.My question is based upon Temperature Rise and Insulating Materials topic in portion Electrical Engineering Materials of Design of Electrical Machines
What is the temperature of Class B?(a) 120°C(b) 130°C(c) 155°C(d) 180°CThis question was posed to me in an internship interview.This interesting question is from Temperature Rise and Insulating Materials in portion Electrical Engineering Materials of Design of Electrical Machines
Class A has higher temperature than Class E.(a) True(b) FalseI have been asked this question by my college professor while I was bunking the class.The doubt is from Temperature Rise and Insulating Materials topic in section Electrical Engineering Materials of Design of Electrical Machines
How many classes have their temperatures above 100°C?(a) 5(b) 6(c) 7(d) 8I have been asked this question in semester exam.This intriguing question comes from Temperature Rise and Insulating Materials in portion Electrical Engineering Materials of Design of Electrical Machines
How many types of electrical insulators are present on the basis of voltage application?(a) 2(b) 3(c) 4(d) 5I got this question in an interview for job.My question is from Insulating Materials topic in section Electrical Engineering Materials of Design of Electrical Machines

Discussion

No Comment Found

Related InterviewSolutions

Reply to Comment