In 8085 microprocessor based system running at 3 MHz clock frequency w – InterviewSolution

InterviewSolution

1.	In 8085 microprocessor based system running at 3 MHz clock frequency what should be the minimum pulse width of the INTR signal, so that it is recognized successfully?
Answer» T = x 106 = 0.333 μs 8085 checks INTR, one clock period before the last T-state of an instruction cycle. In 8085, CALL instruction requires 18 T-states. ∴ INTR pulse should be high at least for 17.5 T-states i.e. for 17.5 x 0.33 x 10-6 = 5.8 μs long.

Discussion

No Comment Found

Related InterviewSolutions

84 - 2 is equal to
The transform of a particular signal is given as The practical implementation of the system will be
If = then G(1/) is __________ where G()
Figure shows four D type FFs are connected as a shift register using an XOR gate. The initial state and 3 subsequent states for 3 clock pulses are also givenThe state Q Q Q Q after the 4th clock pulse is
A rectangular wave guide is designed to propagate at the dominant mode TE at a frequency of 5 GHz. The cut-off frequency is 0.8 of signal frequency. The ratio of the guide width to height is 2. The dimensions of the guide are
In the Taylor series expansion of exp() + sin() about the point = , the coefficient of ( - ) is
Calculate the electrostatic force of repulsion between two mica particles at a distance of 10 from each other. Charge on a particle is 3.2 x 10 C. (relative permittivity for mica is 5)
What is the propagation constant for air filled wave guide with dimensions = 1.59" and = 0.795" at 4.95 GHz. The wave impedance is
If (10) x (10) = (100); (100) x (100) = (10000) then can take value
A uniform plane wave in air with H = 3 sin (ω - 8)A/ is incident normally on a region with σ = 0, μ = 1, ε = 9. The reflection coefficient is