In an SCR, the anode current is controlled by – InterviewSolution

InterviewSolution

1.	In an SCR, the anode current is controlled by
Answer» Once SCR has been triggered the gate has no control. Only external resistance controls the anode current.

Discussion

No Comment Found

Related InterviewSolutions

In a dual converter both converters work as rectifiers.
A single phase full wave regulator feeds R-L load. The best gating signal is
A 3 phase induction motor is fed by a 3 phase ac regulator to change the stator voltage. The variation in speed will be more if
A cycloconverter cannot give a frequency higher than input frequency.
A dc circuit breaker must use
In a single phase full wave regulator feeding R-L load, the minimum firing angle can be zero.
An RC snubber circuit is used to protect a thyristor against :
UJT can be used for
In a series inverter supplying a load resistance R, the commutating elements L and C should be such that
In a full wave converter (M - 2 connection) feeding an RLE load, the peak thyristor current is 15 A. For fully controlled bridge circuit and same load current, the peak thyristor current will be