InterviewSolution
Saved Bookmarks
InterviewSolution
| 1. |
One application of `L-R-C` series circuit is in high pass or low pass filter, which out either the low or high frequency components of a signal. A has pass filter is shown in figure where the output voltage is taken across the `L-R` where `L-R` combination represents and inductive coil that also has resistance due to the large length of the wire in the coil. Find the ratio `V_("out") //V_(s)` as a function of the angular frequency `omega` of the sourceA. `sqrt((R^(2) + omega L^(2))/(R^(2) + (omega L - (1)/(omega C))^(2)))`B. `sqrt((R^(2) + omega^(2) L^(2))/(R^(2) + (omega L - (1)/(omega C))^(2)))`C. `sqrt((R^(2) + omega^(2) L)/(R^(2) + (omega C - (1)/(omega L))^(2)))`D. 1 |
|
Answer» Correct Answer - B `V_("out") = (V_(s))/(sqrt(R^(2) + (omega L - (1)/(omega C))^(2))) xx sqrt(R^(2) + omega^(2) L^(2))` `(V_("out"))/(V_(s)) = (sqrt(R^(2) + omega^(2) L^(2)))/(sqrt(R^(2) + (omega L - (1)/(omega C))^(2))) = sqrt((R^(2) + omega^(2) L^(2))/(R^(2) + (omega L - (1)/(omega C))^(2)))` |
|