Plan table surveying uses the methodology of:(a) Triangulation(b) Contouring(c) Ranging(d) TraversingI got this question at a job interview.The question is from Plane Table Surveying topic in portion Basic Surveying of Basic Civil Engineering

Plan table surveying uses the methodology of:(a) Triangulation(b) Cont

1.	Plan table surveying uses the methodology of:(a) Triangulation(b) Contouring(c) Ranging(d) TraversingI got this question at a job interview.The question is from Plane Table Surveying topic in portion Basic Surveying of Basic Civil Engineering
Answer» RIGHT choice is (d) TRAVERSING To explain I would say: Traversing is a methodology where the number of CONNECTED lines are there whose length is measured using tape/chain and ANGLE using any angle measuring INSTRUMENT. PT survey uses this methodology.

Discussion

No Comment Found

Related InterviewSolutions

A total station is a combination of:(a) EDM and Theodolite(b) Compass and EDM(c) Electronic Theodolite and EDM(d) EDM and electronic CompassI have been asked this question in class test.Question is from EDM in portion Basic Surveying of Basic Civil Engineering
Which is the arithmetic check for the height of instrument method?(a) ∑FS + ∑BS = First RL + Last [email protected](b) ∑BS – ∑FS = Last RL – First [email protected](c) ∑FS + ∑BS = Last RL + First [email protected](d) ∑BS – ∑FS = First RL – Last [email protected]I got this question in final exam.This is a very interesting question from Methods of Levelling topic in division Basic Surveying of Basic Civil Engineering
Reciprocal levelling is used when,(a) Flat terrain(b) Obstacles are there(c) BM not visible(d) Highway constructionThis question was posed to me in a job interview.Query is from Methods of Levelling in section Basic Surveying of Basic Civil Engineering
Stadia levelling is a modified form of:(a) Fly levelling(b) Differential levelling(c) Simple levelling(d) Trigonometric levellingThe question was asked in class test.Origin of the question is Methods of Levelling topic in chapter Basic Surveying of Basic Civil Engineering
Level vials can be of ____________ types.(a) 4(b) 3(c) 5(d) 2I had been asked this question during an online exam.The query is from Equipments Used in Levelling topic in portion Basic Surveying of Basic Civil Engineering
How many types of self-reading staff are available?(a) 5(b) 2(c) 3(d) 4I had been asked this question during an interview.Enquiry is from Equipments Used in Levelling in section Basic Surveying of Basic Civil Engineering
A digital level reads a:(a) Target staff(b) Barcoded staff(c) Digital staff(d) Telescopic staffI got this question in quiz.My doubt stems from Equipments Used in Levelling in section Basic Surveying of Basic Civil Engineering
The book in which chain measurements are entered is called:(a) Field book(b) Record book(c) Study book(d) Chain bookI have been asked this question in unit test.This intriguing question comes from Chain Surveying in chapter Basic Surveying of Basic Civil Engineering
How many types of chains are used in chain surveying?(a) 4(b) 5(c) 6(d) 8The question was asked in an online interview.Enquiry is from Chain Surveying in section Basic Surveying of Basic Civil Engineering
A plumbing fork is used to __________ the plane table.(a) Focus(b) Centre(c) Orient(d) LevelI had been asked this question in an interview for job.I need to ask this question from Plane Table Surveying topic in portion Basic Surveying of Basic Civil Engineering

Plan table surveying uses the methodology of:(a) Triangulation(b) Contouring(c) Ranging(d) TraversingI got this question at a job interview.The question is from Plane Table Surveying topic in portion Basic Surveying of Basic Civil Engineering

Discussion

No Comment Found

Related InterviewSolutions

Reply to Comment