1.

Solve : Computer not starting up after blackout.?

Answer»

after a blackout, computer doesn't start up.

i tried diff outlets on my apc surge arrest,
i tried diff main power outlets,
i tried leaving it plugged in for a few hours and then start,

but in end still nothing.

this happened previously before, and i thought it was dead so i called APC to file a claim. the guy told me to try diff outlets on the bar and i did. the result was, the computer worked on other ones.  so they said the bar was faulty and sent me a new one. now the same thing happens and even if i try the diff outlets, nothing happens.

i had a few prior problems with the computer before, such as CMOS screen poping up, but that happened once and like a few months ago. then there was a few times where it would goto the windows screen, but not load the desktop. i restarted it a few times and it followed through and worked.  that also occured like a few months ago and never again.

i own a p4 2.8, 1gb ram, gfx5500, 300gb hd. its about 6yrs old.

i searched the forum and looked for possible solutions, but none of the cases matches mine perfectly so here i am posting.  Remove the APC and plug DIRECTLY into the wall receptacle.i tried that also. this nothing.

however, i do hear a small buzz/whistle noise when its plugged into an outlet, apc or wall.  i figured it was a "charge" but ya.

stiill won't start.Any lights, fans starting up, HD startup, beeps?nothing starts up. no lights or beeps.  the only sound is from when i plug it into an outlet, its like a buzz/humming noise, very faintSee if you can borrow a power supply of = or > wattage and swap it in and see it it fires up........Computer was plugged into the apc surge arrester and computer was on or off when you lost power?  It's beginning to looks like the power supply (psu) is damaged.i was using the cpu when the power went out. it was only for like 5secs and came back on.  but when i tried restarting, it dint' work.  its always plugged into the apc.  i tested the outlets with other stuff like light,monitor and speakers and all works fine.

my friend suggested i check if the motherboard light is on, and it is.

as for spare power supply, i won't be able to get one until maybe tomorrow, and might even need to buy a new one if anything.  just wanted to confirm its the problem before spending.It's not confirmed unless you can verify the buzzing is from the psu.  If motherboard light is on, then part of the psu is still functional.  Do you have a voltmeter and do you know how to use it?i have one, but not 100% confidant on how it works. Quote from: chuchuboi on October 27, 2009, 06:26:33 PM

i have one, but not 100% confidant on how it works.
That doesn't do you much good.

ATX Pinout
6-year old computer is probably ATX-P4-Type.

You need to know more about the computer before you buy an new one.
Post back with Computer Make and Model Number.the computer was a prebuilt one, no name brand.  i just remember it was a p4 2.6 or 2.8.

as for the power type, it has 2 thing connecting to the mb.  1 is a square plug and the other is 20pins. same colors as the one you gave the link to.Lay the computer on it's side and remove the side panel.
You test the psu voltages with everything plugged TOGETHER and on.  Voltmeter probes go into the back of the plugs.  Set voltmeter on DC, put probe of black LEAD into any Black wire and leave it there for all tests.  Probe each pin that has a voltage (plus or minus) with the red lead and record the voltages.  Skip pins-8 and 14. 
Be careful not to short probe ENDS together when they are contacting voltages.

Notice the color codes:
Org=+3.3V
Red=+5V
Yel=+12V
Blk=Gnd

It appears that the +5V is OK (MB light is on), but one or more of the others (+12, +3.3) is out

Be careful not to short probe ends together when they are contacting voltages.

what does that mean?



so  i keep everything plugged.  then i put the black tip into any of the black wires coming out of the 20pin plug,   and then test the rest with the red wire to check the vols,  excluding 8 and 14?when you say DC  which one?

on my voltmeter, it has

DCV 10, 50, 250, 500
DC Ma .5, 50, 250


Discussion

No Comment Found