1.

Solve : Computer shutting down for no reason.?

Answer»

Hey guys,

This is really starting to bug the life out of me. Over the past 2 weeks my computer has been shutting down with no reason, at any random time. It's only 3 months old as well. Sometimes it will shutdown anywhere between boot, or after 6 hours of use, at complete random.

It is a custom built desktop.

Specs:
Intel Core i7 2600K
ASRock Z68 Extreme4 Motherboard B3
XFX Radeon HD6950 2GB   
G.Skill Ripjaws X F3-10666CL9D-8GBXL (2x4GB) DDR3
Crucial M4 SSD 64GB
Seagate Barracuda 1TB ST31000524AS
Corsair TX-650 V2 Power Supply
Pioneer DVR-219L DVDRW OEM   
Microsoft Windows 7 Home Premium 64bit   
CoolerMaster MegaFlow 200 RED   
CoolerMaster HAF 922 Case
Antec KUHLER H2O 620 CPU Cooler

Actions I have already taken to fix this problem, with no results:
- Scanned for all viruses 3 times on different programs
- Cleaned out case using compressed air: My comp will be running at 30C and it will still turn off so it's not overheating
- GPU is only running at 37C
- Checked my MOBO is tight against the case
- Checked all wires are plugged in securely
- Checked to see if RAM was an issue
- Reset BIOS undoing my overclock
- Prime95'ed

I don't have a spare PSU so what can I do?Looked into your motherboard online and it shows that versions prior to B3 were unreliable.

Quote

Sadly, the P67 PLATFORM has been tainted a little by the Cougar Point chipset SATA port issues, which could cause long term reliability problems. Intel and all their partners had to rush to support users and replace millions of boards and according to the latest reports, Intel are a billion dollars out of pocket. If you get a new P67 motherboard just make sure it is the B3 revision (which is fixed).
From: http://www.kitguru.net/components/motherboard/zardon/asrock-z68-extreme-4-intel-z68-motherboard-review/

I had a bad experience with another ASROCK board and quality flaw and thats why I looked into research into your motherboard. My problem was solder balls all over the place shorting out legs etc as they come loose and in contact with surface mount chips etc. Tapped the board on a table with white sheet of paper and about 8 solder balls about the size of a pen ball point dropped and rolled on paper. Then tested the board after that and it worked but I had very little trust in its quality and reliability after. I saw a large solder ball that tipped me off to the problem by a PCI port. My symptoms were random black screens, failed boots, and all sorts of odd behavior.


I'd check to make sure all fans are spinning as for a bad fan can cause the system to shut down to protect itself, and then move onto the PSU even though you dont have one available.

Also other times I have seen unstable systems it was the result of dirty line power to the outlet that the computer was on, such as one customer I had that complained that there system would reboot randomly, but it seemed to happen more in the evenings. The cause was that their bedroom directly above the kitchen shared the same power with that of the microwave oven and the draw of the microwave oven dropped the line voltage on that service of their home and caused the system to reboot. The lights flickering was the KEY indicator there as well. I suggesed adding a $50 UPS and their problem was solved. If you dont have a UPS Battery Backup, its a good investment, although it probably wont help your current issue unless a line power issue.
Quote from: nixie on November 11, 2011, 05:43:35 PM
If you dont have a UPS Battery Backup, its a good investment

All computers should be run off UPSS.  Besides the battery backup features, all name brands include excellent surge protection.


Discussion

No Comment Found