|
Answer» My WinXP machine freezes 1 minute after booting up and logging in. The motherboard has a built in Ethernet port and sound, separate video card. I booted into safe mode with networking but there is no network available Looked at Device Manager list and no network card exists. Disabled network in BIOS (MAC option) boots into regular mode and does not lock up. I then installed a network card, booted into regular mode but it locks up just like before. I then booted into safe mode with networking and the network card and internet connection works. Is this a bad motherboard? this could be corrupted drivers, go into the control panel/ system / hardware / device manager/ select the "network adapters" device and uninstall it, in your case you may find the original onboard network device and the additional network card you have added uninstall both. and then SWITCH the pc off. while off remove the additional card, reboot and go into the BIOS, and activate the onboard network device, SAVE settings and reboot, then after windows starts back if it asks for drivers for new device found, install the drivers for the motherboard, that should fix it all. if the onboard network device is not working you must disable it in the BIOS. then fit the network card into the PCI slot and reboot, then when widows is up and running it will find the device and ask for drivers, then install the drivers. a reboot will be required likely after the new drivers are installed, then the main network settings can happen during the reboot, then test for network/internet connections
I cannot uninstall the onboard network adapter because the computer freezes before I can get it uninstalled. The onboard network adapter does not show up in the Device manager in safe mode even when it is enabled in BIOS. So I uninstalled in safe mode the extra network card, disabled the MAC in BIOS, then rebooted into normal mode and it detected the additional network adapter, but it locked up again. I also tried installing the latest Nvidia LAN driver but that did not fix things. Right now I am getting by with a USB Ethernet adapter. One thing you can try is re-installing the MBoard drivers...what options for the onboard NIC are listed in the BIOS ? ?Can you tell us a little more info please?
what make/model of computer? what make model of motherboard? cpu ? ram? what size is the power supply rated at? in watts
as long as the onboard NIC is active in the BIOS, any additional NIC will have problems, it has to be disabled in the BIOS. what make is it anyway?
is there any chance it is set at 1000Mbps ? auto negotiable is better.
If after trying what Patio suggests and if that doesn't work, get another NIC. They're cheap enough. Remember to disable the onboard NIC
Alan <>< Quote from: uesquebeathus on July 04, 2007, 08:35:30 AM Can you tell us a little more info please?
what make/model of computer? Home built, Single PCI Express video card, firewire card what make model of motherboard? Chaintech cpu ? AMD 3500 ram? 1 GIG what size is the power supply rated at? 450 in watts
as long as the onboard NIC is active in the BIOS, any additional NIC will have problems, it has to be disabled in the BIOS. Onboard NIC is disabled in BIOS what make is it anyway? Nforce4 motherboard
is there any chance it is set at 1000Mbps ? auto negotiable is better. Set to auto negotiate
OK, so I have been getting by using an EXTERNAL USB to Ethernet adapter for my network connection. I have observed a strange behavior. If I leave the USB-Ethernet adapter plugged in when my computer starts up and logs in and all then the LOCKUP happens But If I leave the adapter unplugged while the computer boots up, then plug it in once everything is done loading then it works, no lockups. Strange Some sort of service starting that causes the lockup?
Poorly written drivers perhaps ? ?
A PCI NIC card is about 10 or 15 bucks...No, tried a separate NIC already, same problem. Onboard Nforce chipset NIC locks up as well
|