Greetings CH!!

as the years pass by we are faced with different and new problems. My buddy asked me if i could take a look at his laptop. The computer is a Acer laptop with a fresh LOAD of win 7 home and it boots to the desktop rather slowly. once it finally gets there is gives me some sort of acer compatibility issue and within a few minutes about 2-5 it restarts. The first thing i decided to do was test his RAM. The computer has 6gb. so a 4gb stick with a 2gb stick. so i inserted the memtest cd and away it went. about 5 minutes in the test the screen went crazy with errors. ok. so i pulled the 4gb stick and ran the test. "all TESTS passed" then i did the 2gb stick and it passed too. i tried testing both the sticks on both the slots and separately they passed, together they didnt. Anyways now the laptop runs fine. but for how long? is there a way i can run diagnostics on its HDD? and what would the idle temps be for it? The laptop is a Acer Aspire 5552-7420

specs
AMD PHENOM ll x2 N660
6gb ram
640gb hard drive
ati mobility radeon HD 4250

Please let me know!>  Hi

memory normally has gold contacts and memory sockets are not gold therefore over time the socket to memory contact tarnishes. So just removing and re inserting the memory a few times can fix a memory fault. If you can get an old typist eraser or the eraser from a pencil this is coarse enough on the memory modules contacts to polish them. There is nothing you can do with the socket EXCEPT use a magnifying lens to check that there is no damage. Never use contact CLEANER on the sockets as that is designed for contacts carrying a lot more current than a memory chip so a film is left between the socket and memory module which effects operation.

I would run Benchme from here http://www.benchbench.com/
to check the hard drive speed.

Quote from: Lisa_maree on January 10, 2014, 10:11:44 PM

Hi

memory normally has gold contacts and memory sockets are not gold therefore over time the socket to memory contact tarnishes. So just removing and re inserting the memory a few times can fix a memory fault. If you can get an old typist eraser or the eraser from a pencil this is coarse enough on the memory modules contacts to polish them. There is nothing you can do with the socket except use a magnifying lens to check that there is no damage. Never use contact cleaner on the sockets as that is designed for contacts carrying a lot more current than a memory chip so a film is left between the socket and memory module which effects operation.

I would run Benchme from here http://www.benchbench.com/
to check the hard drive speed.