Sometimes the structures are to be temporarily supported. This is achieved by what is known as the _________(a) Scaffolding(b) Shoring(c) Underpinning(d) GroutingI had been asked this question in unit test.Question is taken from Shoring and its Types topic in section Scaffolding, Shoring and Underpinning of Construction & Building Materials

Sometimes the structures are to be temporarily supported. This is achi

1.	Sometimes the structures are to be temporarily supported. This is achieved by what is known as the _________(a) Scaffolding(b) Shoring(c) Underpinning(d) GroutingI had been asked this question in unit test.Question is taken from Shoring and its Types topic in section Scaffolding, Shoring and Underpinning of Construction & Building Materials
Answer» Correct OPTION is (B) Shoring Best explanation: Shoring is essential for STRUCTURES which have become UNSAFE due to an equal settlement of foundation or due to removal of the adjacent building or due to any other reason. For safe structures, The Shoring is required to prevent MOVEMENT when certain additions and alterations are being carried out.

Discussion

No Comment Found

Related InterviewSolutions

In _________ method, the piles are driven along both the sides of existing wall and the needle in the form of pile caps are provided through the existing one.(a) Pit method(b) Pile method(c) Miscellaneous method(d) VibroflotationThis question was posed to me by my school principal while I was bunking the class.This key question is from Underpinning and its Types in section Scaffolding, Shoring and Underpinning of Construction & Building Materials
If the standards or not resting on the firm ground, the _________ of the standard should be provided and their bottom ends.(a) Bedding(b) Finishing(c) Raising(d) SpacingThe question was posed to me in an internship interview.My doubt is from Shoring and its Types in chapter Scaffolding, Shoring and Underpinning of Construction & Building Materials
The loading on the scaffolding decides the __________ of standards.(a) Bedding(b) Raising(c) Finishing(d) SpacingI had been asked this question during an interview.My doubt stems from Shoring and its Types in division Scaffolding, Shoring and Underpinning of Construction & Building Materials
A large factor of safety should be adopted in the design of __________ as it is difficult to assess the actual loads.(a) Vertical shores(b) Pit method(c) Horizontal shore(d) Pile methodI have been asked this question in quiz.My enquiry is from Underpinning and its Types topic in chapter Scaffolding, Shoring and Underpinning of Construction & Building Materials
_________ are the vertical members of the framework and they are either supported on the ground or embedded into the ground.(a) Ledgers(b) Standards(c) Putlogs(d) RakersThis question was posed to me in my homework.This interesting question is from Component Parts of a Scaffolding topic in portion Scaffolding, Shoring and Underpinning of Construction & Building Materials
__________ is a very light type of scaffolding and can be used only for the maintenance work such as painting, pointing, whitewashing, etc.(a) Trestle scaffolding(b) Suspended scaffolding(c) Patented scaffolding(d) Needle scaffoldingThis question was posed to me in final exam.My question comes from Component Parts of a Scaffolding topic in section Scaffolding, Shoring and Underpinning of Construction & Building Materials
In _________ method, the soil under the existing footing is consolidated by using chemicals.(a) Chemical consolidation(b) Freezing(c) Cement grouting(d) VibroflotationI have been asked this question by my college professor while I was bunking the class.Query is from Underpinning and its Types in section Scaffolding, Shoring and Underpinning of Construction & Building Materials
In __________ type of scaffolding, in place of timber, the Steel tubes can be effectively used for the scaffolding work.(a) Steel scaffolding(b) Patented scaffolding(c) Suspended scaffolding(d) Trestle scaffoldingThe question was asked by my school principal while I was bunking the class.This is a very interesting question from Component Parts of a Scaffolding in division Scaffolding, Shoring and Underpinning of Construction & Building Materials
In __________ method of underpinning, the existing wall is divided into suitable sections of width about 1.20 metre to 1.50 metre.(a) Pit Method(b) Pile Method(c) Miscellaneous Method(d) Chemical MethodThe question was asked in a national level competition.This question is from Underpinning and its Types topic in portion Scaffolding, Shoring and Underpinning of Construction & Building Materials
________ is a piece which is used to bridge an opening in a wall and it supports one end of the putlog at the opening.(a) Transoms(b) Braces(c) Rope(d) BridleThis question was addressed to me in an interview for internship.This intriguing question comes from Component Parts of a Scaffolding in portion Scaffolding, Shoring and Underpinning of Construction & Building Materials

Discussion

No Comment Found

Related InterviewSolutions

Reply to Comment