Temperature and humidity should be _________(a) Very low(b) Very high(c) Be controlled accordingly(d) Is not a matter of concernI had been asked this question during a job interview.My question is from Finishing Patterns & Storing of Patterns topic in division Pattern and Pattern Making of Casting-Forming-Welding I

Temperature and humidity should be _________(a) Very low(b) Very high(

1.	Temperature and humidity should be _________(a) Very low(b) Very high(c) Be controlled accordingly(d) Is not a matter of concernI had been asked this question during a job interview.My question is from Finishing Patterns & Storing of Patterns topic in division Pattern and Pattern Making of Casting-Forming-Welding I
Answer» RIGHT ANSWER is (c) Be controlled accordingly The best EXPLANATION: Neither too high nor too low temp is REQUIRED but it is a factor to be controlled as to AVOID pattern rusting or warping.

Discussion

No Comment Found

Related InterviewSolutions

Which of the following reason is not valid for pattern colouring?(a) Identification of main body(b) Visualising the to be machined surface(c) Indication of the type of metal(d) Locating parting surfaceI had been asked this question during an online interview.I'm obligated to ask this question of Pattern Colours in section Pattern and Pattern Making of Casting-Forming-Welding I
Which of the following has the lowest melting point?(a) Cast Iron(b) Steel(c) White Metal(d) BrassThe question was asked in class test.This intriguing question comes from Pattern Materials in chapter Pattern and Pattern Making of Casting-Forming-Welding I
Which of the following is not a limitation of metal patterns?(a) Get rusted(b) Obtain rough surface finish(c) Expensive(d) HeavyI had been asked this question by my school teacher while I was bunking the class.The origin of the question is Pattern Materials in portion Pattern and Pattern Making of Casting-Forming-Welding I
Which of the following is not a limitation of wooden patterns?(a) Get abraded easily(b) Absorb moisture(c) Difficult machining(d) Poor wear resistanceThis question was posed to me during an interview.Origin of the question is Pattern Materials topic in chapter Pattern and Pattern Making of Casting-Forming-Welding I
Subsequent machining for products finishing does not require extra material to the metal casting, as it removes negligible amount of material from the casting.(a) True(b) FalseI got this question during an interview.My enquiry is from Finishing Patterns & Storing of Patterns topic in section Pattern and Pattern Making of Casting-Forming-Welding I
Which of the following technologies is used in metal casting for reducing the product development time?(a) Radiography(b) UV radiation(c) Eddy current coiling(d) Rapid prototypingThe question was asked in semester exam.My question is based upon Finishing Patterns & Storing of Patterns in division Pattern and Pattern Making of Casting-Forming-Welding I
While imparting colours to the patterns, which colour scheme is followed?(a) Indian(b) American(c) Australian(d) BritainThe question was posed to me in final exam.The above asked question is from Pattern Colours topic in division Pattern and Pattern Making of Casting-Forming-Welding I
Which of the following ranges show the approx range of finishing depth (in mm) required for finished casting?(a) 2 to 20(b) 20 to 30(c) 30 to 35(d) 35 to 40I got this question in an international level competition.My question is taken from Finishing Patterns & Storing of Patterns topic in division Pattern and Pattern Making of Casting-Forming-Welding I
Finishing also includes removal of scales from the surface of the casting.(a) True(b) FalseThe question was posed to me during an internship interview.I'd like to ask this question from Finishing Patterns & Storing of Patterns in chapter Pattern and Pattern Making of Casting-Forming-Welding I
Core boxes are made out of which pattern?(a) Plaster pattern(b) Wax pattern(c) Metal patterns(d) Polystyrene patternsThe question was posed to me in a job interview.My doubt is from Pattern Materials in section Pattern and Pattern Making of Casting-Forming-Welding I

Discussion

No Comment Found

Related InterviewSolutions

Reply to Comment