Related InterviewSolutions

• A 1 mA meter is to be converted to 1 A ammeter. The meter resistance is 100 Ω. The value of shunt resistance is
• The use of thermocouple meters for ac measurement leads to a scale which is
• The current in a circuit is measured using a 150 : 1 CT If the ammeter reads 0.6 A, the circuit current is
• A volt ratio box should have low resistance.
• A Hall effect transducer has K = - 1 x 10. If B = 1 Wb/m, I = 3 A and bismuth slab is 2 mm wide, the Hall voltage is
• Two ammeters A and B both 0-10 A have internal resistance of 1 Ω and 0.5 Ω respectively. They are connected in parallel. If total current is 15 A, then
• A meter having 0-1000 μA range and 1000 Ω resistance is required to be changed to 0-100 mA meter. The value of shunt resistance is about
• An induction wattmeter can be used for
• In the balanced bridge shown in figure. should be
• If the current in a capacitor leads the voltage by 80°, the loss angle of capacitor is