The output of a transducer must be __________(a) low(b) medium(c) high(d) zeroI had been asked this question during an online interview.This interesting question is from Characteristic of Transducers topic in portion Transducers of Electrical Measurements

The output of a transducer must be __________(a) low(b) medium(c) high

1.	The output of a transducer must be __________(a) low(b) medium(c) high(d) zeroI had been asked this question during an online interview.This interesting question is from Characteristic of Transducers topic in portion Transducers of Electrical Measurements
Answer» Correct choice is (C) high The EXPLANATION is: Output of a transducer is usually high so that it can be easily MEASURED and PROCESSED. The transducer output is generally higher than the noise. As a RESULT most of the application makes use of digital outputs.

Discussion

No Comment Found

Related InterviewSolutions

Reverse leakage current in a transistor _______(a) is affected by light(b) is not affected by light(c) increases with a decrease in pressure(d) decreases with increase in temperatureI had been asked this question during an interview.Origin of the question is Photoelectric Transducers in portion Transducers of Electrical Measurements
Response time for gas-filled phototubes is _______(a) zero(b) intermediate(c) fast(d) slowThe question was posed to me in quiz.I'm obligated to ask this question of Photoelectric Transducers in division Transducers of Electrical Measurements
Optocoupler consists of a phototransistor and a led.(a) True(b) FalseI had been asked this question in a job interview.My question is taken from Photoelectric Transducers topic in chapter Transducers of Electrical Measurements
When an open circuited pn junction is illuminated then _________________(a) resistance increases(b) there is no effect(c) electron hole pairs are formed(d) capacitance increasesI got this question in an online quiz.Question is from Photoelectric Transducers topic in division Transducers of Electrical Measurements
Photoconductors are made of _______(a) thick layer of semiconductor(b) thin layer of semiconductor(c) capacitive substrate(d) inductive substrateThis question was posed to me during an interview.Question is taken from Photoelectric Transducers topic in division Transducers of Electrical Measurements
Commonly used photoemissive material is _______(a) gold(b) opium(c) tellurium(d) cesium-antimonyThis question was posed to me in a job interview.I'm obligated to ask this question of Photoelectric Transducers topic in chapter Transducers of Electrical Measurements
Phototubes are very quick in response to light.(a) True(b) FalseI had been asked this question during an interview.I'd like to ask this question from Photoelectric Transducers in section Transducers of Electrical Measurements
Photoconductive transducers produce output ________(a) due to change in inductance(b) due to change inlight(c) due to change in resistance(d) due to change in temperatureI had been asked this question during a job interview.Enquiry is from Photoelectric Transducers in section Transducers of Electrical Measurements
Optical radiations involve _________(a) optoelectric devices(b) biological devices(c) mechanical devices(d) chemical devicesI had been asked this question in class test.Enquiry is from Photoelectric Transducers in chapter Transducers of Electrical Measurements
Photoelectric transducers consist of _______(a) 1 transducer(b) 3 transducers(c) 5 transducers(d) 10 transducersThe question was asked by my school principal while I was bunking the class.The above asked question is from Photoelectric Transducers in portion Transducers of Electrical Measurements

The output of a transducer must be __________(a) low(b) medium(c) high(d) zeroI had been asked this question during an online interview.This interesting question is from Characteristic of Transducers topic in portion Transducers of Electrical Measurements

Discussion

No Comment Found

Related InterviewSolutions

Reply to Comment