The torque (in mm) acting on a circular current loop of radius 1 mm in – InterviewSolution

InterviewSolution

1.	The torque (in mm) acting on a circular current loop of radius 1 mm in the plane, connected at the origin and with current 0.1 A, flowing in the sense of increasing in a magnetic field is
Answer» t = M x B

Discussion

No Comment Found

Related InterviewSolutions

Distilled water at 25°C is characterized by σ = 1.7 x 10 mho/m and ε = 78 ε at a frequency of 3 GHz. Its loss tangent is (ε = 10/36 F/m)
The input impedance of short-circuited line of length where < λ/4
If the height of transmitting and receiving antenna in a LOS system are 49 meter and a 9 meter respectively then the distance up to which communication may be possible is about
A material has conductivity of 10 mho/m and a relative permittivity of 4. The frequency at which conduction current in the medium is equal to displacement current is
An end fire array consisting of several half-wave lengths of directive gain 40, then find the width of major lobe
In a line VSWR of a load is 6 dB. The reflection coefficient will be
The refractive index of E layer at frequency of
Calculate the directivity of a given linear end fire, uniform array of 20 element, each separated by λ/3
For a 400 kHz transmission line having L = 0.5 mH/km, C = 0.08 mF and negligible R and G, the velocity propagation will be
Antenna efficiency of antenna is, if radiation resistance is 370 &ohm; and loss resistance is 100 &ohm;