The type of signal transmission in which no power is wasted on the carrier is known as ________(a) Amplitude modulation(b) Frequency modulation(c) Sideband suppressed carrier signal(d) Unsuppressed carrierI got this question in an interview for internship.My question is from Single Sideband Modulation topic in chapter Amplitude & Frequency Modulation of Avionics

The type of signal transmission in which no power is wasted on the car

1.	The type of signal transmission in which no power is wasted on the carrier is known as ________(a) Amplitude modulation(b) Frequency modulation(c) Sideband suppressed carrier signal(d) Unsuppressed carrierI got this question in an interview for internship.My question is from Single Sideband Modulation topic in chapter Amplitude & Frequency Modulation of Avionics
Answer» Correct CHOICE is (c) SIDEBAND SUPPRESSED carrier signal Easy explanation: In an SSB or single sideband signal, the carrier is suppressed LEAVING the upper and lower sidebands. The resulting signal is referred to as the sideband suppressed carrier signal and one of the major benefits of this type of signal is that no power is wasted on the carrier.

Discussion

No Comment Found

Related InterviewSolutions

Which of the following pairs of resistors and capacitors can be used in high pass filters for preemphasis circuits?(a) 100Ω and 0.075μF(b) 100Ω and 0.75μF(c) 150Ω and 0.75μF(d) 16Ω and 0.75μFThis question was posed to me during an interview.I need to ask this question from Noise Suppression Effects of FM topic in portion Amplitude & Frequency Modulation of Avionics
What is the technique in which the high frequency components are amplified more than the low frequency components in FM?(a) Garble(b) Preemphasis(c) Detoriation(d) Selective amplificationThis question was addressed to me in my homework.I'd like to ask this question from Noise Suppression Effects of FM topic in portion Amplitude & Frequency Modulation of Avionics
What is the signal to noise ratio if the maximum allowable frequency deviation is 4kHz and the frequency deviation by noise is 156.42Hz?(a) 0.0364(b) 0.0391(c) 25.75(d) 20.45This question was posed to me in semester exam.The question is from Noise Suppression Effects of FM in division Amplitude & Frequency Modulation of Avionics
What is the ratio of the shift produced by the noise to the maximum allowed deviation if the modulating frequency is 300Hz and the phase shift by noise is 25° and the maximum allowable deviation is 5kHz?(a) 1.3(b) 0.530(c) 0.153(d) 0.0261This question was addressed to me at a job interview.This question is from Noise Suppression Effects of FM in section Amplitude & Frequency Modulation of Avionics
Calculate the phase difference by noise if the Signal to noise ratio is 7:2.(a) 15.366°(b) 17.5°(c) 13.65°(d) 8.21°This question was posed to me in exam.Question is from Noise Suppression Effects of FM topic in portion Amplitude & Frequency Modulation of Avionics
What is the frequency deviation produced by noise if the modulating frequency is 400Hz and the phase difference introduced by noise is 0.43rad?(a) 124Hz(b) 163Hz(c) 172Hz(d) 200HzThe question was posed to me during a job interview.This is a very interesting question from Noise Suppression Effects of FM in portion Amplitude & Frequency Modulation of Avionics
What is the noise to signal ratio if the phase shift introduced by noise is 0.75°?(a) 0.5(b) 0.966(c) 0.25(d) 1.75This question was addressed to me in an online quiz.I'd like to ask this question from Noise Suppression Effects of FM in division Amplitude & Frequency Modulation of Avionics
What is the frequency deviation produced by noise if the signal to noise ratio is 3:1 and modulating frequency is 800Hz?(a) 152.32Hz(b) 482.5Hz(c) 132.8Hz(d) 271.HzI have been asked this question during an interview.My question comes from Noise Suppression Effects of FM in portion Amplitude & Frequency Modulation of Avionics
Noise introduces a frequency variation into the signal.(a) True(b) FalseThe question was asked in quiz.This interesting question is from Noise Suppression Effects of FM topic in section Amplitude & Frequency Modulation of Avionics
Which circuit in FM receivers cancels or filters out noise?(a) Filter circuits(b) Anti-noise circuits(c) Limiter circuits(d) delimiter circuitsThis question was posed to me in examination.I'm obligated to ask this question of Noise Suppression Effects of FM in division Amplitude & Frequency Modulation of Avionics

Discussion

No Comment Found

Related InterviewSolutions

Reply to Comment