1.

Write down the procedure for replacing the oil in the gearbox.

Answer»

Procedure of changing gear box oil: 

  1.  Run the vehicle for few kilometres and park it on a hard level ground. 
  2.  Place a container below the drain plug to drain the old oil. 
  3.  Remove the drain plug and filler plug and leave it for some time till the complete old oil is drained. 
  4.  Replace the drain plug with new washer and tighten with specified torque. 
  5.  Fill the gearbox with new oil of correct quantity and grade and close filler/Level plug. 

NOTE: When the oil starts flowing out through the filler plug/ level plug it means gear box is filled with correct quantity of oil.



Discussion

No Comment Found

Related InterviewSolutions