Explore topic-wise InterviewSolutions in .

If you wish to enter ENGLISH as well, you can do so by entering in the same line by FIRST toggling to English ENTRY mode and entering English on the same line.

Now as you can see the English text spills over to the NEXT line and actually comes below the ARABIC text. If you wish to have columnar text of Arabic followed by columnar text of Urdu and columnar text of English, then you have two options.

If you wish to enter English as well, you can do so by entering in the same line by first toggling to English entry mode and entering English on the same line.

Now as you can see the English text spills over to the next line and actually comes below the Arabic text. If you wish to have columnar text of Arabic followed by columnar text of Urdu and columnar text of English, then you have two options.

• Insert a table using Table MENU item in the Insert menu and choose a three columnar table.
• Set the font of the first column (by first selecting the column by double CLICKING) to Trad Arabic, second column to Noori Nastaliq. Other attributes like Forced Justify, Line Direction ETC. can also be separately applied to each column in the table.
• CLICK on first column and enter Arabic text. Press Tab KEY when you have finished with Arabic entry.
• Enter the Urdu translation in the second column. Press Tab key at the end.
• Now toggle to English entry mode in the third column. Enter the English translation in this column.

This option is useful if you wish to have continuous Arabic, Urdu and English text (for example an Urdu and English translation of The Holy Quran).

In this case follow these steps:

• Make a new Right To Left document without automatic text box. If need be make a double sided document.
• Go to Master Page mode by clicking on the Master Page button. On the master page, make three independent and un-linked text boxes.
• Change over to the document mode by clicking again on Master Page button. In the document area, you can set FONTS for each of the text chain.
• For the first COLUMN, click on the text box by clicking with I-Beam tool and set the font of this text chain by double clicking and setting the font to Trad Arabic font from the Urdu fonts combo box.
• For the second column, click on the second text box by clicking with I-Beam tool and set the font of this text chain by double clicking and setting the font to Noori Nastaliq font from the Urdu fonts combo box.
• For the third text box, set the line direction of the paragraph to Left to Right.
• If REQUIRED set the justified option to Full Justify for all the three text chains.
• Now you have the basic INFRASTRUCTURE for entering Arabic text in the first text chain, Urdu text in the second text box and English text in the third text box.

This option is useful if you wish to have continuous Arabic, Urdu and English text (for example an Urdu and English translation of The Holy Quran).

In this case follow these steps:

You can USE InPage to inter MIX mathematical equations with urdu/english text. These equations will need to be entered in MS WINDOWS compatible software which supports EQUATION. ONE such package is Microsoft's Equation Editor.

You can use InPage to inter mix mathematical equations with urdu/english text. These equations will need to be entered in MS Windows compatible software which supports equation. One such package is Microsoft's Equation Editor.

If you have problems in baseline alignment of equation and URDU text, it is SUGGESTED that you go to the Normal style sheet (from Format Style sheet menu ITEM) and modify the baseline shift in Character dialog to -2 pt. This will lead to SHIFTING of complete Urdu text by -2 pt and the text and equations will align on the baseline

If you have problems in baseline alignment of equation and Urdu text, it is suggested that you go to the Normal style sheet (from Format Style sheet menu item) and modify the baseline shift in Character dialog to -2 pt. This will lead to shifting of complete Urdu text by -2 pt and the text and equations will align on the baseline

• First run Equation Editor.
• In In-Page, position your caret at the point where you WISH to INSERT the equation.
• Now go to Equation Editor (by using standard WINDOWS application switching short cut key sequence-Alt-Tab). Type in the equation in the Equation Editor. Copy the equation from the editor and then paste it in In-Page at the caret position.
• You will notice that the equation gets pasted as an INLINE picture. THUS at any point in the text you can paste such equations. Because these equations get pasted as Windows meta-file, there will not be any loss in print quality when you take a print out.

With InPage, you can now enter text in Urdu, copy the text box and paste it in Corel Draw 5.0.

The VARIOUS steps are :

• First run InPage.
• Now launch Corel Draw.
• Make a headline in InPage by first creating a text box or a TITLE text box and entering Urdu in the text box.
• Once the text has been COMPLETELY entered, select the ARROW Tool from the tool strip and now select this text box in the arrow MODE.
• Copy this text box onto the clipboard by using the Copy command.
• Now switch to Corel Draw and paste the text box you have already copied onto the clipboard.
• Go to the Arrange menu and choose Ungroup.
• Sometimes a text box appears as a frame when you paste the text in Corel Draw. After ungrouping, you can select the frame and delete the extra frame.
• Now select the complete text using the selection rectangle and choose Combine menu item from the Arrange menu.

With InPage, you can now enter text in Urdu, copy the text box and paste it in Corel Draw 5.0.

The various steps are :

InPage allows you to use all the diacritical (or Aeraabs) marks used in Urdu, Arabic, Kashmiri and other Perso-Arabic Scripts. For details VIEW the KEYBOARD through Keyboard Preferences. Many SPECIAL symbols have also been provided. Some of these can be ENTERED using the keyboard whereas others can be inserted in the textbox from the Symbol menu.

InPage allows you to use all the diacritical (or Aeraabs) marks used in Urdu, Arabic, Kashmiri and other Perso-Arabic Scripts. For details view the keyboard through Keyboard Preferences. Many special symbols have also been provided. Some of these can be entered using the keyboard whereas others can be inserted in the textbox from the Symbol menu.

• Insert a Table with three columns. The EXTREME left and extreme right columns are to be used for entering ghazal text. The middle column will be used for controlling space between the text.
• Set the table WIDTH of the extreme right column (column no. 1) and extreme left (column no. 3) to 3 cm. Set the middle column to 0.2 cm. Set the Table Alignment to Centered. All these operations are to be carried from Format Table menu item in Format menu.
• Select all the columns and click on the Forced JUSTIFY icon from the Text Ribbon.
• Now enter Urdu text in column no. 1. Follow it up with two tabs to reach column no. 3 and enter the corresponding second part of the couplet.
• Continue till you have entered all the four LINES.
• For the bottom portion of the ghazal, enter one column table and specify the width as 3 cm. Again select the column and set the Forced Justify option.
• Now enter Urdu text for the bottom portion of the ghazal.
• REPEAT the above steps till you have laid out the complete ghazal.

• Create a style sheet by choosing the Style sheet menu item from the Format menu and clicking on the New button in the ensuing Style sheet dialog.
• Enter the name of the new style sheet as lets say 'Right' and click on OK button.
• Now click on the Paragraph button and specify the beginning indent (from left) as 5 cm and end indent (from right) as 2 cm. ALSO choose the Alignment as Forced JUSTIFY.
• Enter the KEYBOARD shortcut for the style sheet as 'R'.
• Make another style sheet and call it 'Left' with keyboard shortcut as 'L'.
• Specify the beginning indent as 2 cm and end indent as 5 cm.
• Once you have these style sheets, you can use Ctrl+Shift+R and Ctrl+Shift+L to apply the style sheet to the current paragraphs.
• First apply Ctrl+Shift+R and enter first two lines of Urdu text.
• Now apply Ctrl+Shift+L and enter next two lines of Urdu text.
• Repeat the last two steps till you have entered the complete ghazal.

• Insert Table by using the Table menu item in the Insert menu.
• Specify number of COLUMNS (2 in this CASE) required ALONG with its width if any. If you do not specify the width of the column, the TEXT box width will be divided by number of columns required and you will get the default column width.
• Select the right column & click on Arabic character alignment button.
• Select the left column & click on the Latin character alignment button.
• Now start in Urdu entry mode and enter Urdu text. Once the text has been entered in a cell, press Tab.
• In this cell switch to ENGLISH entry mode and enter the English text.
• Repeat the above steps to completely enter all the Urdu and English text.

• IBM compatible PC 486 and above with at least 32 MB RAM and 50 MB free HARD disk space and a VGA Monitor
• Any printer compatible with MS-Windows 95 or later.

IBM PC Pentium II with 64 MB RAM and 200 MB FREE HARD disk space.

IBM PC Pentium II with 64 MB RAM and 200 MB free hard disk space.

INPAGE NEEDS MS-Windows 95 or later on IBM COMPATIBLE PCs.

InPage needs MS-Windows 95 or later on IBM compatible PCs.

This dongel is white in color and is attached to the parallel port of your machine. There are TWO ends of the dongel. One end of the dongel gets attached to the parallel port of your machine. The printer cable gets attached to the other end of dongel.

To install the dongel onto your machine PLEASE follow these steps:

•  If your computer is ALREADY CONNECTED to the printer, ensure that the printer is switched off.
•  REMOVE the printer cable from the computer end. Attach one end (male end) of the dongel to the parallel port and screw it tight using the built-in screws provided with the dongel.
•  Now you can attach the printer cable onto this dongel.
•  You can switch on your printer if you wish to use it immediately.

The dongel does neither interfere with any other application already installed on your machine nor with any other functionality of your computer like Printing etc. Once you have correctly and firmly attached the dongel, you can begin installing InPage from the supplied floppy disks.

This dongel is white in color and is attached to the parallel port of your machine. There are two ends of the dongel. One end of the dongel gets attached to the parallel port of your machine. The printer cable gets attached to the other end of dongel.

To install the dongel onto your machine please follow these steps:

The dongel does neither interfere with any other application already installed on your machine nor with any other functionality of your computer like Printing etc. Once you have correctly and firmly attached the dongel, you can begin installing InPage from the supplied floppy disks.

This dongel is blue in color and is attached to the Universal Serial Bus (USB) PORT of your machine. Before attaching it to the USB port of your machine, please confirm that in the INTEGRATED PERIPHERALS settings in the BIOS setup when your machine is starting to boot up, you have enabled the USB CONTROLLER. Also first install InPage from the CD, then run InPage as PER instructions below. InPage will automatically install/update the HASP DRIVER and will prompt you to restart your machine. Now is the TIME for you to attach your USB dongel.

This dongel is blue in color and is attached to the Universal Serial Bus (USB) port of your machine. Before attaching it to the USB port of your machine, please confirm that in the INTEGRATED PERIPHERALS settings in the BIOS setup when your machine is starting to boot up, you have enabled the USB controller. Also first install InPage from the CD, then run InPage as per instructions below. InPage will automatically install/update the HASP driver and will prompt you to restart your machine. Now is the time for you to attach your USB dongel.

This dongel is red in color. The dongel is attached to the parallel port of the machine which you wish to make a SERVER. The server need not be dedicated. The terminology 'server' is used to signify that a SOFTWARE called 'LICENSE Manager' will run on this machine. The License Manager is a file called NHSRVW32.EXE found inside the SERVER sub-directory inside HASP.

This dongel is red in color. The dongel is attached to the parallel port of the machine which you wish to make a server. The server need not be dedicated. The terminology 'server' is used to signify that a software called 'License Manager' will run on this machine. The License Manager is a file called NHSRVW32.EXE found inside the SERVER sub-directory inside HASP.

If your software comes with a software protection then you will need to get the correct SITE key after emailing the site code to the appropriate EMAIL address. The details of this will get automatically displayed when you launch InPage for the first time. If you are using Windows NT, PLEASE ensure that you are in logged in with Administrative PRIVILEGES before INSTALLING InPage.

If your software comes with a software protection then you will need to get the correct site key after emailing the site code to the appropriate email address. The details of this will get automatically displayed when you launch InPage for the first time. If you are using Windows NT, please ensure that you are in logged in with Administrative privileges before installing InPage.

• Toggle for English/Urdu/Sindhi ENTRY
• TOOLS
• RIBBON
• Status Bar
• RULERS
• Document Area
• SCROLL Bars

The language TOGGLE command lets you switch between English, Urdu and Sindhi Entry Mode. You can use either use Ctrl-Space key combination or the Toggle MENU command from the Language menu to switch between these language entry modes. The selected language gets displayed in the Status Bar at the bottom of the Window. In the Urdu Entry Mode, you can not only type Urdu but Arabic, Persian, and other Perso-Arabic SCRIPTS. Usually a keyboard is PROVIDED for each language that is there. For changing the selected keyboard, you will need to go to the Keyboard Preferences in the Preferences menu ITEM of the Edit menu.

The language toggle command lets you switch between English, Urdu and Sindhi Entry Mode. You can use either use Ctrl-Space key combination or the Toggle menu command from the Language menu to switch between these language entry modes. The selected language gets displayed in the Status Bar at the bottom of the Window. In the Urdu Entry Mode, you can not only type Urdu but Arabic, Persian, and other Perso-Arabic scripts. Usually a keyboard is provided for each language that is there. For changing the selected keyboard, you will need to go to the Keyboard Preferences in the Preferences menu item of the Edit menu.

As you MOVE about selecting and un-selecting OBJECTS or text, the ribbon CHANGES to display the correct attributes of the selected OBJECT or text. It also allows you to modify one or more attributes of the object or text.

There are six types of ribbon:

1. Object Attributes Ribbon. One or more of InPage objects (Text box,Title Text box, PICTURE box, Graphic box, Line) are selected.
2. Text Attributes Ribbon.
3. Picture Edit Ribbon.
4. Inline Graphics Ribbon.
5. Tabs Ribbon.
6. Paste Ribbon.

 When neither object nor text is selected. Ribbon is either blank or reflects the ribbon for the selected tool.

As you move about selecting and un-selecting objects or text, the ribbon changes to display the correct attributes of the selected object or text. It also allows you to modify one or more attributes of the object or text.

There are six types of ribbon:

 When neither object nor text is selected. Ribbon is either blank or reflects the ribbon for the selected tool.

MASTER Page BUTTON: Allows you to view either the master PAGES or the document pages. If the master page button is SELECTED on then you can view and work on the master pages. On the other hand if it is off then you can view and work on the document pages.

Master Page Button: Allows you to view either the master pages or the document pages. If the master page button is selected on then you can view and work on the master pages. On the other hand if it is off then you can view and work on the document pages.

If the MASTER page BUTTON is selected on then the Page Scroller LETS you scroll the master pages. If the master page button is off, then you can scroll the document pages. You can scroll by CLICKING the left and right arrow of the Page Scroller. You can also go to a specific page by entering that page number and pressing enter/return.

If the master page button is selected on then the Page Scroller lets you scroll the master pages. If the master page button is off, then you can scroll the document pages. You can scroll by clicking the left and right arrow of the Page Scroller. You can also go to a specific page by entering that page number and pressing enter/return.

View LETS you control scaling of your document. You can enter WHATEVER PERCENTAGE scaling is desired. On clicking enter/return the document gets SCALED to the ENTERED percentage.

View lets you control scaling of your document. You can enter whatever percentage scaling is desired. On clicking enter/return the document gets scaled to the entered percentage.

Both vertical and horizontal rulers are PROVIDED for PROPER measurement guidance during creation and modification of OBJECTS. The RULER area is also used for creation of guides.

Both vertical and horizontal rulers are provided for proper measurement guidance during creation and modification of objects. The ruler area is also used for creation of guides.

CLICKING and DRAGGING on the Origin Box and LEAVING the Cross cursor at the DESIRED position on the page ENABLES you to set the ruler origin to that point on the page.

Clicking and dragging on the Origin Box and leaving the Cross cursor at the desired position on the page enables you to set the ruler origin to that point on the page.

The Document Area is where you can create and edit VARIOUS KINDS of objects LIKE Text boxes, PICTURE Boxes, Graphic Boxes, Lines etc. This area is made up of visible Pages and global PASTEBOARD (area around the visible pages). Pasteboard is for temporary storage of objects on pasteboard do not from part of the document and are not printed out.

The Document Area is where you can create and edit various kinds of objects like Text boxes, Picture Boxes, Graphic Boxes, Lines etc. This area is made up of visible Pages and global Pasteboard (area around the visible pages). Pasteboard is for temporary storage of objects on pasteboard do not from part of the document and are not printed out.

There are TWO scroll BARS, Vertical Scroll BAR for vertical scrolling of the document area and Horizontal Scroll Bar for horizontal scrolling.

There are two scroll bars, Vertical Scroll Bar for vertical scrolling of the document area and Horizontal Scroll Bar for horizontal scrolling.

As you move the mouse on the screen, the cursor SHAPE changes to REFLECT the kind and status of the object immediately underneath. If the currently SELECTED tool in the Tool Strip is a CREATION tool then the cursor is always a CROSS. If you have selected an Arrow cursor then the cursor shape is always an Arrow cursor. On the other hand if you have selected an IBEAM tool then the cursor shape is always Arrow cursor except on top of the handles of a selected objects, where the cursor becomes an arrow indicating the direction of resize.

As you move the mouse on the screen, the cursor shape changes to reflect the kind and status of the object immediately underneath. If the currently selected tool in the Tool Strip is a creation tool then the cursor is always a CROSS. If you have selected an Arrow cursor then the cursor shape is always an Arrow cursor. On the other hand if you have selected an IBEAM tool then the cursor shape is always Arrow cursor except on top of the handles of a selected objects, where the cursor becomes an arrow indicating the direction of resize.

IBEAM EXCEPT on TOP of text BOX and picture box when it varies as FOLLOWS:

• Dotted IBEAM on top any Text box,
• IBEAM on top of a Text box in the currently selected text CHAIN,
• Hand on top of the currently selected Picture Box, and
• Dotted Hand on top of a Picture Box.

IBEAM except on top of text box and picture box when it varies as follows:

1. LINK FRAME CURSOR : When Text box linking is desired.
2. DELINK FRAME Cursor : When Text box delinking is desired.
3. Horizontal guide/vertical guide Cursor : USED during creation of guides
4. Paste Cursor : Used during paste of OBJECTS see the paste menu ITEM of Edit menu.
5. ROTATION Cursor : When rotation of selected objects is desired.

To create an object, you will FIRST have to SELECT the PROPER Tool. All the creation tools display the cursor as CROSS. Now CLICK the mouse in the Document Area and while keeping the mouse pressed, drag the mouse. The Ribbon will show the X and Y COORDINATES where the mouse was clicked as well as the updated width and height of the object as mouse is moved. When the required size of the box has been achieved, leave the mouse button. You will now get a selected object with size attributes as indicated in the Ribbon.You can also create an object by entering its coordinates and its width and height in the Object Ribbon.

To create an object, you will first have to select the proper Tool. All the creation tools display the cursor as CROSS. Now click the mouse in the Document Area and while keeping the mouse pressed, drag the mouse. The Ribbon will show the X and Y coordinates where the mouse was clicked as well as the updated width and height of the object as mouse is moved. When the required size of the box has been achieved, leave the mouse button. You will now get a selected object with size attributes as indicated in the Ribbon.You can also create an object by entering its coordinates and its width and height in the Object Ribbon.

For re-sizing, copying, deleting and changing attributes, you need to select an object. You can select an object with an ARROW CURSOR. For this, first select the Arrow TOOL. If you now click on the object, it will be SELECTED and you ill see highlighted selection points on the object. To select more then one object at the same time, KEEP the SHIFT key pressed while other OBJECTS are selected with the help of the mouse.

For re-sizing, copying, deleting and changing attributes, you need to select an object. You can select an object with an ARROW cursor. For this, first select the Arrow Tool. If you now click on the object, it will be selected and you ill see highlighted selection points on the object. To select more then one object at the same time, keep the SHIFT key pressed while other objects are selected with the help of the mouse.

To MOVE an object you will first select the Arrow TOOL. Now click the mouse on top of the object. The object will get selected and while keeping the mouse pressed drag the mouse, the object will now move ALONG with the mouse. On leaving the mouse, the new POSITIONS of the object gets registered and the changed values are reflected in the RIBBON.

To move an object you will first select the Arrow Tool. Now click the mouse on top of the object. The object will get selected and while keeping the mouse pressed drag the mouse, the object will now move along with the mouse. On leaving the mouse, the new positions of the object gets registered and the changed values are reflected in the Ribbon.

A selected object has HANDLES USING which the object can be RESIZED. Bring the mouse CURSOR on top of one of these handles. The cursor shape changes to a Resize ARROW. With this resize cursor, press the mouse and DRAG while keeping the mouse pressed. Leave the mouse when the required size has been achieved.

A selected object has handles using which the object can be resized. Bring the mouse cursor on top of one of these handles. The cursor shape changes to a Resize ARROW. With this resize cursor, press the mouse and drag while keeping the mouse pressed. Leave the mouse when the required size has been achieved.

You can lock an object so as to prevent its accidental movement or deletion. For locking you have to invoke the appropriate object dialog by double clicking on the object or objects and setting the lock CHECK box as ON. Once you lock an object its selection points appear as gray rather than black (which is the case in normal selection).

Once locked you will not be able to MOVE or delete the object. If you do need to carry out any one of these OPERATIONS then unlock the object. To unlock a locked object, you just have to un-check the lock check box in the FORMAT object dialog box. A locked object has selection points (handles) that are grey in color WHEREAS unlocked objects have black handles.

You can lock an object so as to prevent its accidental movement or deletion. For locking you have to invoke the appropriate object dialog by double clicking on the object or objects and setting the lock check box as ON. Once you lock an object its selection points appear as gray rather than black (which is the case in normal selection).

Once locked you will not be able to move or delete the object. If you do need to carry out any one of these operations then unlock the object. To unlock a locked object, you just have to un-check the lock check box in the Format object dialog box. A locked object has selection points (handles) that are grey in color whereas unlocked objects have black handles.

SOMETIMES there is a need to mark ONE or more object as Don't Print so as to prevent the object or objects from being printed out. You can do so by checking the Don't Print check BOX in the Format Object dialog. To RESET this attribute you must uncheck this check box.

Sometimes there is a need to mark one or more object as Don't Print so as to prevent the object or objects from being printed out. You can do so by checking the Don't Print check box in the Format Object dialog. To reset this attribute you must uncheck this check box.

Once an OBJECT is MARKED as Template then that object behaves as a master mould. You can make exact replicas of the template object by just DRAGGING the template object.Instead of moving the template object, the dragging OPERATION peels off an identical COPY of the template object. You would usually make a template object in the pasteboard.

Once an object is marked as Template then that object behaves as a master mould. You can make exact replicas of the template object by just dragging the template object.Instead of moving the template object, the dragging operation peels off an identical copy of the template object. You would usually make a template object in the pasteboard.

OBJECTS can be copied to clipboard, or pasted from clipboard. Cut and Clear both delete the selected objects. WHEREAS Cut copies the objects to the clipboard, clear just deletes the selected objects. Copy on the other hand copies the selected objects to the clipboard without deleting the objects. Once the objects have been copied to clipboard, they can be pasted by invoking the Paste command. On invoking the Paste command the cursor changes to Paste cursor.

You can click with this cursor anywhere on the PAGE. All the objects on the clipboard are pasted with RESPECT to this clicked reference point. If your document type is left to right then this point is treated as left top of the boundary rectangle OUTLINING all the selected objects. On the other hand if your document type is right to left then this point is treated as right top of the boundary rectangle.

Objects can be copied to clipboard, or pasted from clipboard. Cut and Clear both delete the selected objects. Whereas Cut copies the objects to the clipboard, clear just deletes the selected objects. Copy on the other hand copies the selected objects to the clipboard without deleting the objects. Once the objects have been copied to clipboard, they can be pasted by invoking the Paste command. On invoking the Paste command the cursor changes to Paste cursor.

You can click with this cursor anywhere on the page. All the objects on the clipboard are pasted with respect to this clicked reference point. If your document type is left to right then this point is treated as left top of the boundary rectangle outlining all the selected objects. On the other hand if your document type is right to left then this point is treated as right top of the boundary rectangle.

Duplicate ENABLES you to duplicate a group of selected objects in a tabular format. The duplicate DIALOG asks you information as to number of rows and number of columns in which the duplicated objects will be arranged. You will also be asked to specify column and row gap so as to OFFSET each row of objects by this gap and each column by the column gap. 

Note that duplicate TREATS the selected objects as a group and while duplicating calculates the outer bounding rectangle of this group of objects.

Duplicate enables you to duplicate a group of selected objects in a tabular format. The duplicate dialog asks you information as to number of rows and number of columns in which the duplicated objects will be arranged. You will also be asked to specify column and row gap so as to offset each row of objects by this gap and each column by the column gap. 

Note that duplicate treats the selected objects as a group and while duplicating calculates the outer bounding rectangle of this group of objects.

When objects are placed on top of TEXT box containing text, then you can control text run around these objects. By DEFAULT text boxes and picture boxes have the runaround option ON. That is, these objects when placed on top of text box with text will lead to text getting repelled from these objects unless you choose Run Around menu option from the Format dialog and un-check the Run Around check box. Whereas for GRAPHIC boxes and lines, run around option is OFF. Besides these default values, you can specify the distance that text will FLOW AWAY from the object.

When objects are placed on top of text box containing text, then you can control text run around these objects. By default text boxes and picture boxes have the runaround option ON. That is, these objects when placed on top of text box with text will lead to text getting repelled from these objects unless you choose Run Around menu option from the Format dialog and un-check the Run Around check box. Whereas for graphic boxes and lines, run around option is OFF. Besides these default values, you can specify the distance that text will flow away from the object.

All the objects in an InPage document can be ROTATED.The ROTATION is carried out in Object Selection MODE i.e. with the Arrow key. Once the object has been SELECTED, it can be rotated by specifying the angle of rotation in the Object dialog or by selecting the rotation tool and rotating the object.

All the objects in an InPage document can be rotated.The rotation is carried out in Object Selection mode i.e. with the Arrow key. Once the object has been selected, it can be rotated by specifying the angle of rotation in the Object dialog or by selecting the rotation tool and rotating the object.

You can take PRINTOUTS in mirror fashion only on POSTSCRIPT printers by USING the mirror feature in-built in Postscript printer DRIVERS.

You can take printouts in mirror fashion only on Postscript printers by using the mirror feature in-built in Postscript printer drivers.

A 12 pt ENGLISH text is bigger than a 12 pt URDU text. We have an option in the Typographic Preferences where you can set the 'Reduce Latin Font size' FIELD. By default this is set to 18%. That at the same point size, English text will be reduced by 18%. You can MODIFY this value to suit your needs.

A 12 pt English text is bigger than a 12 pt urdu text. We have an option in the Typographic Preferences where you can set the 'Reduce Latin Font size' field. By default this is set to 18%. That at the same point size, English text will be reduced by 18%. You can modify this value to suit your needs.

This is because you have not selected the text to which you are APPLYING the font. For all the character attributes (like font change, font size, bold, italic, inter character GAP, baseline SHIFT etc.) you will always need to select the text to which you are applying these attributes.

This is because you have not selected the text to which you are applying the font. For all the character attributes (like font change, font size, bold, italic, inter character gap, baseline shift etc.) you will always need to select the text to which you are applying these attributes.

Probably you are actually opening a document file of some other application. In case you are sure that you are opening an INPAGE document, then its quite possible that on your last save the file was not saved properly. At this juncture you have the option to open the .BAK file and retrieve your document before the last save state.

If you get the above message (from opening the .BAK file as well), then you can try retrieving only the text portion of your document (without any formatting) by importing the saved file as a text file in a new document. When you use the Import Text menu item and you get a Import Text dialog box, you should CHOOSE the file type as Text File (*.txt). This will LEAD to INSERTION of some junk characters at the beginning of the document and after 8-9 pages you will start GETTING Urdu/Arabic/English text. You can remove the junk characters from your document and make fresh changes to this newly retrieved document.

Probably you are actually opening a document file of some other application. In case you are sure that you are opening an InPage document, then its quite possible that on your last save the file was not saved properly. At this juncture you have the option to open the .BAK file and retrieve your document before the last save state.

If you get the above message (from opening the .BAK file as well), then you can try retrieving only the text portion of your document (without any formatting) by importing the saved file as a text file in a new document. When you use the Import Text menu item and you get a Import Text dialog box, you should choose the file type as Text File (*.txt). This will lead to insertion of some junk characters at the beginning of the document and after 8-9 pages you will start getting Urdu/Arabic/English text. You can remove the junk characters from your document and make fresh changes to this newly retrieved document.