20 + Interview Questions in Joining Process in Casting-Forming-Welding Ii Page 1 InterviewSolution

1.	The following figure represents which rivet head?(a) Pan head(b) Conical head(c) Countersunk head(d) Cup headI have been asked this question during an interview.Asked question is from Riveting in section Joining Process of Casting-Forming-Welding II
Answer» The CORRECT CHOICE is (a) PAN head Easiest explanation: For the production of rivets, the most commonly used materials are WROUGHT iron and MILD steels. The following figure represents a pan head rivet.

Discussion

2.	The following figure represents which type of adhesive bonded joint?(a) Joggle tap better(b) Double lap good(c) Double strap better(d) Scarf betterI got this question during an interview.My question is from Adhesive Bonding topic in section Joining Process of Casting-Forming-Welding II
Answer» The correct option is (c) Double strap better Easy explanation: In this FIGURE, there is a double strap better. A cleavage stress MIGHT result in failures EVEN at low levels of loading. This is used to AVOID cleavage STRESSES.

Discussion

3.	The following figure represents which rivet head?(a) Pan head(b) Half countersunk head(c) Conical head(d) Snap headI have been asked this question in an interview.This intriguing question originated from Riveting topic in section Joining Process of Casting-Forming-Welding II
Answer» Correct answer is (b) HALF COUNTERSUNK head Best explanation: Riveting is a process that is used for fastening a particular joint permanently. For the production of RIVETS, the most COMMONLY used materials are wrought iron and mild STEELS. The following figure represents a pan head rivet.

Discussion

4.	Cup head riveting provides maximum strength.(a) True(b) FalseI got this question by my school principal while I was bunking the class.My enquiry is from Riveting topic in chapter Joining Process of Casting-Forming-Welding II
Answer» CORRECT choice is (b) False Easiest explanation: Cup head riveting or snap head riveting is the most commonly USED METHOD of riveting, but the method that PROVIDES the most strength is the pan head riveting method.

Discussion

5.	There can be 4 rows of rivets in lap joint.(a) True(b) FalseThe question was asked during an online interview.This interesting question is from Riveting in division Joining Process of Casting-Forming-Welding II
Answer» The correct CHOICE is (b) False To EXPLAIN I would say: In case of lap joint or butt joint, the riveted joints can be single riveted, double riveted or treble riveted, and when the forces are HIGH, a lozenge joint or a diamond joint can be involved, in that case there can be only one, two or THREE rows in lap joint, not more.

Discussion

6.	The following figure represents which type of adhesive bonded joint?(a) Double butt lap excellent(b) Tongue and groove(c) Double lap good(d) Joggle lap betterI had been asked this question in class test.My doubt is from Adhesive Bonding topic in chapter Joining Process of Casting-Forming-Welding II
Answer» The correct option is (C) DOUBLE lap good Explanation: NONE.

Discussion

7.	The following figure represents which type of adhesive bonded joint?(a) Butt unsatisfactory(b) Plain lap good(c) Beveled lap excellent(d) Scarf betterI had been asked this question by my college professor while I was bunking the class.My question is based upon Adhesive Bonding topic in section Joining Process of Casting-Forming-Welding II
Answer» Correct choice is (a) BUTT unsatisfactory To explain: Structural adhesives are mainly used when the joint is forced UPON by the loads of SHEAR and tensions. To avoid cleavage stresses, an ADHESIVE bonded joint is used. This FIGURE represents a butt unsatisfactory.

Discussion

8.	The following figure represents which rivet head?(a) Conical head by hammering(b) Snap head(c) Pan head(d) Conical headThe question was posed to me during a job interview.Query is from Riveting topic in chapter Joining Process of Casting-Forming-Welding II
Answer» The correct answer is (d) CONICAL HEAD Easy explanation: Such an apparatus has a conical head and is produced by HAMMERING. The following figure REPRESENTS a conical head unlike snap head, PAN head and conical head.

Discussion

9.	The following figure represents which type of adhesive bonded joint?(a) Beveled lap excellent(b) Plain lap good(c) Strap good(d) Joggle lap betterThis question was addressed to me during an interview for a job.My doubt stems from Adhesive Bonding in section Joining Process of Casting-Forming-Welding II
Answer» RIGHT option is (C) Strap good For explanation I would say: A CLEAVAGE stress might result in FAILURES even at low LEVELS of loading. To avoid this, an adhesive bonded joint is used. This figure represents a strap good joint.

Discussion

10.	The following figure represents which rivet head?(a) Conical head by hammering(b) Snap head(c) Pan head(d) Conical headThis question was posed to me in a national level competition.My doubt is from Riveting in division Joining Process of Casting-Forming-Welding II
Answer» The CORRECT CHOICE is (a) CONICAL head by hammering To explain: None.

Discussion

11.	Which of the following articles is not manufactured using riveting?(a) Rail wagons(b) Coaches(c) Pressure vessels(d) HelmetsI have been asked this question during an interview for a job.I'm obligated to ask this question of Riveting in division Joining Process of Casting-Forming-Welding II
Answer» Right choice is (d) HELMETS Best explanation: Riveting is LARGELY used in the manufacture of rail wagons, coaches, PRESSURE vessels, BRIDGES and few types of furnace bodies, but for the manufacture of helmets, riveting cannot be used.

Discussion

12.	The following figure represents which type of adhesive bonded joint?(a) Double butt lap excellent(b) Tongue and groove(c) Double tap good(d) Joggle tap betterThe question was posed to me during a job interview.My question is based upon Adhesive Bonding topic in section Joining Process of Casting-Forming-Welding II
Answer» RIGHT ANSWER is (a) Double BUTT lap excellent Easy explanation: NONE.

Discussion

13.	The following figure represents which rivet head?(a) Pan head(b) Conical head(c) Countersunk head(d) Cup headThis question was addressed to me in a national level competition.This intriguing question comes from Riveting topic in section Joining Process of Casting-Forming-Welding II
Answer» The CORRECT choice is (d) Cup head To explain I would say: RIVETING is a PROCESS that is used for fastening a particular joint PERMANENTLY. The following figure is that of a Cup head riveting or snap head riveting is the most commonly used method of riveting.

Discussion

14.	The following figure represents which type of adhesive bonded joint?(a) Beveled lap excellent(b) Plain lap good(c) Strap good(d) Joggle lap betterThis question was posed to me during an online interview.Query is from Adhesive Bonding in portion Joining Process of Casting-Forming-Welding II
Answer» Right choice is (d) Joggle lap BETTER The EXPLANATION is: The following FIGURE WOULD here represent a joggle lap better. An apparatus like this is used when the JOINT experiences loads and tensions.

Discussion

15.	The following figure represents which type of adhesive bonded joint?(a) Scarf better(b) Beveled lap excellent(c) Plain lap good(d) Butt unsatisfactoryI got this question during an internship interview.Origin of the question is Adhesive Bonding in chapter Joining Process of Casting-Forming-Welding II
Answer» CORRECT ANSWER is (B) BEVELED lap excellent The explanation: NONE.

Discussion

16.	The following figure represents which type of adhesive bonded joint?(a) Scarf better(b) Plain lap good(c) Beveled lap excellent(d) Butt unsatisfactoryI had been asked this question in an international level competition.This interesting question is from Adhesive Bonding in section Joining Process of Casting-Forming-Welding II
Answer» RIGHT OPTION is (a) SCARF better Best EXPLANATION: NONE.

Discussion

17.	Which of the following materials is not used in making rivets?(a) Wrought iron(b) Mild steel(c) Brass(d) CalciumI had been asked this question at a job interview.This interesting question is from Riveting in chapter Joining Process of Casting-Forming-Welding II
Answer» Right choice is (d) Calcium For explanation I would say: Among the following, calcium is not USED the riveting process. For the making of rivets, the used materials are wrought IRON and MILD steels. There are other materials also used in it, but they are used for small works, such as BRASS, copper and aluminium.

Discussion

18.	The following figure represents which type of adhesive bonded joint?(a) Double butt lap excellent(b) Tongue and groove(c) Double tap good(d) Joggle tap betterThis question was addressed to me in an internship interview.This intriguing question originated from Adhesive Bonding in section Joining Process of Casting-Forming-Welding II
Answer» Right CHOICE is (B) TONGUE and groove The explanation is: To REMOVE cleavage stress, structural adhesives are used. To avoid this, an adhesive bonded joint is used. This figure represents a tongue and groove joint.

Discussion

19.	The following figure represents which type of adhesive bonded joint?(a) Butt unsatisfactory(b) Plain lap good(c) Beveled lap excellent(d) Scarf betterI had been asked this question in examination.My question is from Adhesive Bonding topic in division Joining Process of Casting-Forming-Welding II
Answer» Right option is (b) Plain lap good The best I can explain: A cleavage STRESS might result in failures even at low LEVELS of loading. To avoid this, an adhesive bonded joint is used. This FIGURE represents a plain lap good joint.

Discussion

20.	The following figure represents which rivet head?(a) Conical head(b) Snap head(c) Countersunk head(d) Pan headThis question was posed to me in final exam.Enquiry is from Riveting in section Joining Process of Casting-Forming-Welding II
Answer» The correct choice is (C) Countersunk head The EXPLANATION: NONE.

Discussion

Explore topic-wise InterviewSolutions in .

The following figure represents which rivet head?(a) Pan head(b) Conical head(c) Countersunk head(d) Cup headI have been asked this question during an interview.Asked question is from Riveting in section Joining Process of Casting-Forming-Welding II

The following figure represents which type of adhesive bonded joint?(a) Joggle tap better(b) Double lap good(c) Double strap better(d) Scarf betterI got this question during an interview.My question is from Adhesive Bonding topic in section Joining Process of Casting-Forming-Welding II

The following figure represents which rivet head?(a) Pan head(b) Half countersunk head(c) Conical head(d) Snap headI have been asked this question in an interview.This intriguing question originated from Riveting topic in section Joining Process of Casting-Forming-Welding II

Cup head riveting provides maximum strength.(a) True(b) FalseI got this question by my school principal while I was bunking the class.My enquiry is from Riveting topic in chapter Joining Process of Casting-Forming-Welding II

There can be 4 rows of rivets in lap joint.(a) True(b) FalseThe question was asked during an online interview.This interesting question is from Riveting in division Joining Process of Casting-Forming-Welding II

The following figure represents which type of adhesive bonded joint?(a) Double butt lap excellent(b) Tongue and groove(c) Double lap good(d) Joggle lap betterI had been asked this question in class test.My doubt is from Adhesive Bonding topic in chapter Joining Process of Casting-Forming-Welding II

The following figure represents which rivet head?(a) Conical head by hammering(b) Snap head(c) Pan head(d) Conical headThe question was posed to me during a job interview.Query is from Riveting topic in chapter Joining Process of Casting-Forming-Welding II

The following figure represents which rivet head?(a) Conical head by hammering(b) Snap head(c) Pan head(d) Conical headThis question was posed to me in a national level competition.My doubt is from Riveting in division Joining Process of Casting-Forming-Welding II

Which of the following articles is not manufactured using riveting?(a) Rail wagons(b) Coaches(c) Pressure vessels(d) HelmetsI have been asked this question during an interview for a job.I'm obligated to ask this question of Riveting in division Joining Process of Casting-Forming-Welding II

The following figure represents which rivet head?(a) Pan head(b) Conical head(c) Countersunk head(d) Cup headThis question was addressed to me in a national level competition.This intriguing question comes from Riveting topic in section Joining Process of Casting-Forming-Welding II

The following figure represents which type of adhesive bonded joint?(a) Beveled lap excellent(b) Plain lap good(c) Strap good(d) Joggle lap betterThis question was posed to me during an online interview.Query is from Adhesive Bonding in portion Joining Process of Casting-Forming-Welding II

Which of the following materials is not used in making rivets?(a) Wrought iron(b) Mild steel(c) Brass(d) CalciumI had been asked this question at a job interview.This interesting question is from Riveting in chapter Joining Process of Casting-Forming-Welding II

The following figure represents which type of adhesive bonded joint?(a) Butt unsatisfactory(b) Plain lap good(c) Beveled lap excellent(d) Scarf betterI had been asked this question in examination.My question is from Adhesive Bonding topic in division Joining Process of Casting-Forming-Welding II

The following figure represents which rivet head?(a) Conical head(b) Snap head(c) Countersunk head(d) Pan headThis question was posed to me in final exam.Enquiry is from Riveting in section Joining Process of Casting-Forming-Welding II