Explore topic-wise InterviewSolutions in .

Hello

Can someone please walk me through how to set up a wireless home network please?

I basically just want to be able to transfer files between my laptop & PC.

I have tried the 'set up a home or SMALL office network' task but it didn't work, I see nothing under 'my network places' on the laptop & a 'network is not accessible. You might not have permission (blah...blah...blah) the network path was not found' so I'm obviously doing something wrong.

I have XP on both computers, pro on the PC & Home on the laptop (if relevant).I ran the wizard again on the PC & this time I got a SharedDocs folder appear in the laptop's 'My Network Places'.

But shouldn't I see the PC's shared folder ASWELL in the same place? I also have only a SharedDocs folder on the PC for that system.

So how do I transfer files ? ? ?1. SneakerNet. If you need to transfer files immediately, the old "SneakerNet" works well with a USB thumb drive (aka flash drive). Write the required files to a USB device, put on your sneakers, walk it over to the other computer, and read the files from the USB device. But that wasn't your question...

2. I understand that you want to share files between computers. It's not clear from your description whether you have a "Local Area Network (LAN)", "file sharing", or "wireless connectivity" problem.

3. I'm assuming this is a home network. What is your network configuration?
Internet (WAN connection) -->
Cable/DSL Modem -->
Wireless Router -->
PC wired to router (connected by ethernet cable)
laptop wireless to router (no cable)
or:
Wireless Router -->
PC wireless to router (no cable)
laptop wireless to router (no cable)
or:
PC wireless to laptop wireless (no cables - adhoc wireless connection)

or something else.

4. Windows XP Home uses "simple" file sharing. Windows XP Professional uses either "simple" or "advanced" file sharing. I believe you should set it to "simple" if you want to share back and forth with the Windows XP Home computer. Because you used the Wizard (and they never reveal their secrets), I don't know what it was trying to do... But it can be setup manually.

5. If you want to do some reading, here are some Microsoft documents on the subject.
File and Printer Sharing with Microsoft Windows
Troubleshooting File and Printer Sharing in Microsoft Windows XP
Computer Browsing for SOHO Networks with Microsoft Windows
Troubleshooting Computer Browsing on SOHO Networks with Microsoft Windows

And some other(s):
How do I setup my own home network?
Diagnose And Repair SOHO networksQuote from: dahlarbear on February 13, 2008, 02:48:42 AM

1. SneakerNet. If you need to transfer files immediately, the old "SneakerNet" works well with a USB thumb drive (aka flash drive). Write the required files to a USB device, put on your sneakers, walk it over to the other computer, and read the files from the USB device. But that wasn't your question...

2. I understand that you want to share files between computers. It's not clear from your description whether you have a "Local Area Network (LAN)", "file sharing", or "wireless connectivity" problem.

3. I'm assuming this is a home network.

What is your network configuration?
Internet (WAN connection) -->
Cable/DSL Modem -->
Wireless Router -->
PC wired to router (connected by ethernet cable)
laptop wireless to router (no cable)
or:
Wireless Router -->
PC wireless to router (no cable)
laptop wireless to router (no cable)
or:
PC wireless to laptop wireless (no cables - adhoc wireless connection)

or something else.

4. Windows XP Home uses "simple" file sharing. Windows XP Professional uses either "simple" or "advanced" file sharing. I believe you should set it to "simple" if you want to share back and forth with the Windows XP Home computer. Because you used the Wizard (and they never reveal their secrets), I don't know what it was trying to do... But it can be setup manually.

5. If you want to do some reading, here are some Microsoft documents on the subject.
File and Printer Sharing with Microsoft Windows
Troubleshooting File and Printer Sharing in Microsoft Windows XP
Computer Browsing for SOHO Networks with Microsoft Windows
Troubleshooting Computer Browsing on SOHO Networks with Microsoft Windows

And some other(s):
How do I setup my own home network?
Diagnose And Repair SOHO networks

I am trying to set up my Netgear WNR834B with my Nintendo DS but I keep getting a error message like: 52001 (Cannot get I.P. Address, check DHCP settings) when I try to connect. I know that the problem is that I am using 802.11g, but how do I change it so that it is not using 802.11g? My WIRELESS configuration settings are:


Account Name WNR854T
Firmware Version 1.4.23NA

Internet PORT
MAC Address 00:18:4D:23:A8:87

DHCP DHCP Client
DOMAIN Name Server

LAN Port
MAC Address 00:18:4D:23:A8:86

DHCP ON


Wireless Port

Region United States
Channel Auto
Mode Up to 145 Mbps
Wireless AP ON
Broadcast Name Enabled
There should be a mode setting somewhere that allow you to CONFIGURE the router to use both b and g mode.Jonathan, please delete the following informations from your post:

Internet Port - IP Address

Wireless Port: SSID Mary (this is your private network, don't tell us how you named it). But only if nothing in your network asks you to broadcast SSID. If nothing asks you to do this, than disable "Broadcast Name".

router manual: ftp://downloads.netgear.com/files/WNR834B_RM_18May06.pdf

See at page 3-6 the "mode" option. You may change from there to 54 Mbps (802.11 g) or 11 Mbps (802.11 b) standards.Should I use this setting (11 b/g/n Mixed mode)? Will this correct the problem? Because, when I set it to this, my computer can't connect to it anymore. This is the setting that I am using (11n Max Speed)Yes I would recommend mixed mode, this would give you the highest level of compatibility.
What error message is your computer giving you if you turn on mixed mode?
I am getting a message that my router is still using 802.11 g.... after I set my router to mixed.But I usedto get a limited or no connectivity message.So what?
Is your computer able to connect to the access point?
Is the DS?Sadly, the "Connect To A Netwotk" screen still lists my CONNECTION as '802.11g'. The connection is not changing for some reason, so the DS is not working yet. If it matters, I am still getting a 52001 Error Message: Cannot obtain I.P. address, check DHCP settings, but there are no definite DHCP settings in my connection... I also am getting a 52002 error message. If I enter all of the I.P. stuff, I get a conncted to the access point but cannot connect to Nintendo WFC or I get a Cannot connect to access point message.Am I being ignored now...?

------------------
System INFORMATION
------------------
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_gdr.050301-1519)
Language: ENGLISH (Regional Setting: English)
System Manufacturer: VIA Technologies, Inc.
System Model: KT400A-8235
BIOS: Phoenix - AwardBIOS v6.00PG
PROCESSOR: AMD Athlon(tm) XP 2400+, MMX, 3DNow, ~2.0GHz
Memory: 1024MB RAM
Page File: 342MB used, 2586MB available
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup PARAMETERS: Not found
DxDiag Version: 5.03.2600.2180 32BIT Unicode

------------


I'm having a problem with opening ports 9896, 16000-16999, and 119.
I virus on my computer has permanently disabled my firewall, so I can't do it from there.
I have a wi-fi connector that hi-jacks my neighbors internet, but when I go to my "network connections" thing, it isn't listed. Also(not sure if this helps), The virus has also disabled my control panel(saying there are restrictions in effect and I need to contact the admin, even though I am the admin).

Is there a way I can configure my wi-fi connector to unblock those ports?
I have tried looking online for a program that will do it automatically, but as far as I know, they only scan which are open or not etc.

Help would be greatly appreciated
Maybe, you should worry about the infection, first?

i have had a problem with my audio/ VIDEO PLAYER stopping after about 45 seconds, EVER since i got a wireless USB connection. why is this?

I currently have a wired network with a SERVER running Windows Server 2000, I was given 20 new PCs that need to be connected wirelessly.
I know I have to get a wireless NIC for my server, do I need any other HARDWARE?

I'm still a beginner at this so if anyone could help that would be great!

Thank youNo, you don't need a wireless NIC for server. You need an access point (connected through a wire to the rest of the wired network) and a wireless NIC for each computer that will be connected by wireless to your network. As access point you may use a wireless router that can be set up to work only as an access point (PLEASE CHECK this detail before ACQUIRING a wireless router).

Thanks, do you know any good makes of wireless routers?
Any known brand: Linksys, D-Link, Belkin, will do.

friend has a computer the operating system is xp professional and i was told to deleted or uninstall both the modems listed and now the computer does not recognize them and install them it asks me to pick on what can i do to fix this i have to use a public computer since i do not own one so any information would be help ful thank you Quote

i was told to deleted or uninstall both the modems listed

no he didnt offer any suggestions.... just wanted me to send the router AT MY EXPENSE to some RETURNS dept over snail mail..........


the only reason i am concerned is because the other computer works fine and i tried new the other computers cable AND switching ports on the router... so i feel as if it IS my computer, you know?!?Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

F:\Documents and Settings\J>tracert google.com

Tracing route to google.com [72.14.207.99]
over a MAXIMUM of 30 hops:

1 <1 ms <1 ms <1 ms 192.168.1.1
2 2 ms 1 ms 1 ms homeportal.gateway.2wire.net [172.16.0.1]
3 53 ms 52 ms 52 ms adsl-99-149-247-254.dsl.sfldmi.sbcglobal.net [99
.149.247.254]
4 53 ms 53 ms 52 ms 67.36.65.2
5 53 ms 53 ms 52 ms bb2-g10-0.sfldmi.sbcglobal.net [151.164.43.63]
6 59 ms 58 ms 60 ms 151.164.93.49
7 59 ms 56 ms 65 ms 151.164.251.226
8 58 ms 56 ms 58 ms 209.85.251.38
9 75 ms 72 ms 74 ms 216.239.46.12
10 73 ms 74 ms 72 ms 72.14.232.111
11 79 ms 72 ms 73 ms 72.14.236.134
12 74 ms 74 ms 74 ms eh-in-f99.google.com [72.14.207.99]

Trace complete.

F:\Documents and Settings\J>Traceroute looks good and if you've tried another computer on the same connection connected to the same port on the router and it worked fine I'd have to agree with you that maybe it is something to do with the computer and not the connection.

Have you tried downloading and updating the drivers for your network card on the computer. Maybe you've got an issue with the drivers on the computer.im hooked soley to the modem right now and things are lightning fast........ i dont know.. maybe its karma? any other ideas are welcomed If you add the router to the modem (without the 60ft cables or other cables you were using) does it still go fast?nope...... it just goes fast on all other computers and when MY computer is soley hooked to the modem.....is there settings on my puter (or elsewhere) that i need to change because i am using a new router.... Netgear RP614v3 to a Netgear WGR614v9........?I'd try to get new ethernet card driver (uninstall current one). If that doesn't work, I'd buy a new card ($15).how do i find out:

a)which card i have (ethernet)
b)its driver location (on the web?)
c)steps on doing this whole process....Download, and install Everest: http://www.majorgeeks.com/download4181.html
Open it, click Computer, then Summary.
In upper menu, go Report>Quick Report-Summary
Save it in text file, and paste it in your next post.
Don't include anything under line Debug - PCI silly major geeks was taking its time so i went to softpedia...... anyways, here's what you asked for:


--------[ EVEREST Home Edition (c) 2003-2005 Lavalys, Inc. ]------------------------------------------------------------

Version EVEREST v2.20.405
Homepage http://www.lavalys.com/
Report Type Quick Report
Computer J (JDesktop)
Generator J
Operating System Microsoft Windows XP Professional 5.1.2600 (WinXP Retail)
Date 2008-05-29
Time 20:22


--------[ Summary ]-----------------------------------------------------------------------------------------------------

Computer:
Operating System Microsoft Windows XP Professional
OS Service Pack Service Pack 2
DirectX 4.09.00.0904 (DirectX 9.0c)
Computer Name J (JDesktop)
User Name J

Motherboard:
CPU Type Intel Pentium III, 500 MHz (5 x 100)
Motherboard Name Intel Seattle II SE440BX-2 (2 ISA, 4 PCI, 1 AGP, 3 DIMM)
Motherboard Chipset Intel 82440BX
System Memory 512 MB (SDRAM)
BIOS Type Phoenix (11/05/99)
Communication Port Communications Port (COM1)
Communication Port Printer Port (LPT1)

Display:
Video Adapter NVIDIA GeForce2 MX 400 (64 MB)
3D Accelerator nVIDIA GeForce2 MX/MX 400
Monitor Plug and Play Monitor [NoDB] (0)

Multimedia:
Audio Adapter Creative SB Live! Value (CT4670) Sound Card
Audio Adapter Yamaha DS-XG Audio CODEC

Storage:
IDE Controller Intel(r) 82371AB/EB PCI BUS Master IDE Controller
Floppy Drive Floppy disk drive
Disk Drive WDC WD800BB-75CAA0 (74 GB, IDE)
Disk Drive Maxtor 92049U6 (20 GB, 7200 RPM, Ultra-ATA/66)
Optical Drive HITACHI DVD-ROM GD-5000 (8x/40x DVD-ROM)
Optical Drive SONY DVD RW DRU-540A (DVD+RW:12x/4x, DVD-RW:8x/4x, DVD-ROM:12x, CD:40x/24x/40x DVD+RW/DVD-RW)
SMART Hard Disks STATUS OK

Partitions:
C: (FAT32) 76274 MB (21315 MB free)
F: (NTFS) 19461 MB (4330 MB free)
Total Size 93.5 GB (25.0 GB free)

Input:
Keyboard Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
Mouse Microsoft PS/2 Port Mouse (IntelliPoint)
Mouse Microsoft USB Wireless Mouse (IntelliPoint)
Game Controller Microsoft PC-joystick driver

Network:
Network Adapter CNet FAST200WL PCI Wake On LAN Fast Ethernet Adapter (192.168.1.2)
Modem SoftK56 Data Fax #2
Modem Standard Modem

Peripherals:
Printer Auto HP DeskJet 840C/841C/842C/843C on HANGI
Printer HP DeskJet 970Cse
Printer HP LaserJet 1100 (MS)
Printer HP Officejet 7300 series fax
Printer HP Officejet 7300 series
Printer hp photosmart 7350 series
Printer HP remote printers
Printer Microsoft XPS Document Writer
USB1 Controller Intel 82371AB/EB PIIX4 - USB Host Controller
USB Device Generic USB Hub
USB Device USB Human Interface Device


certain websites such as this one and google, work super quick.... others like majorgeeks, espn, and more take what seems like dial-up forever!Unfortunately, you'll have to open your computer case, and look at your ethernet card.
Here, it explains why: http://www.cnet.com.tw/download/pro200wl.htm
After you identify P/N number, download appropriate driver, and leave it alone.

Go Start>Run, type in:
devmgmt.msc
Click OK.

In Device Manager, go to Network Adapters, right click on CNet FAST200WL PCI Wake On LAN Fast Ethernet Adapter, click Properties, then Driver tab.
Click on Uninstall button.
After uninstall is completed, go to freshly downloaded file, unzip it, and double click on setup.exe file to began installation.

P. S. This is very old product, so all the above procedure may have no positive effects.i did this last night and NO change....... guess it has to be the router.

why is netgear making ME pay to ship the product because its defective?
is there any way around this???I'd try new ethernet card, first, since yours is rather ancient one.

ok im trying to connect to my network the problem is my brother set it up i don't know the password and my brother for some reason no longer ANSWERS emails. While trying to connect to the network i have to choose from 3 encryption types and on 2 of them i have to choose from a 64 bit or 128 bit...something. and to make things worse the COMPUTER that has the modem and sends the signal is Win 2K SP4 and i cant find any sort of thing to help me find this encryption KEY it doesn't even know that its connected to a Netgear router. i have an idea on the password because i remember my brother told me when he made it but its only 6 characters long so theres another PART. how can i find the pass code and encryption TYPE? It is against forum policy to provide information which relates to the cracking of passwords.

You might try the ideas you have in mind.

I grant you, we don't know all the situation regarding your family, but one would think you have other ways of contacting your brother to obtain the password.

I don't KNOW if this exactly the best place to put this but, up until recently, I USED a usb connector to connect to my Wii gaming console. But now, when I connect it, it DISABLES my internet service. The nintendo tech's told me to find my default gateway and change it, that it would be a xxx.xxx.x.x number, but I see a xx.xxx.xxx.x number instead. I don't know how to change it because I use a modem and a pci card built into the back of my processor to connect to the internet. I have a wireless router, but for WHATEVER reason I can connect without it. And I have tried using it only just so it's known. I really need some HELP. You'll have to forgive me but from what I read above I don't fully understand the issue. Some additional questiosn that should help us help you.

Is this USB cable you're using going from the Wii to the Computer?
What version of Windows are you using on the computer?
Are you loosing Internet connection on your Wii or your Computer or both?

The connector is like a flash drive, I connect it to my computer's usb port. So there's no cable running from the Wii to the computer.

I'm using Windows XP SP2.

I loose connection on my computer and my Wii never has connected because it won't detect my usb connector and for whatever reason the usb connector disables my computer's internet service.Unfortunately I'm not too sure what would be causing this issue. Hopefully one of our other members has a suggestion on this issue.

hi guys.
welldone and more powers to your elbows.

i dont know how possible it is to access my yahoo mail box on our corporate intranet
Your answers WOULD be profoundly appreciatedYou should check with the IT people. If they have it blocked you won't connect to yahoo. Remember...be nice

Alan <&GT;< 10X man.
i think dat was what actually happened.i was made to understand that access list has been configured on the router.And this limit my access to some sites.

i appreciate your immediate response.

why was my netgear mimo faster by far than my new belkin mimo on my ps3?Could distance or bandwidth USAGE be a factor?No. Both were in the same spot and nothing else being used at the time. Youtube songs on the netgear would download in about 20 seconds. On the belkin probably 3 minutes.check your SETTINGS. It could be that the belkin unit defaults to a slower wifi SIGNAL. You MIGHT have to turn on the higher speeds.I'll give that a try.

thank you

Help pls what could be wrong as i am unable to CONNECT to goggle.com on internet explorers browser.
But uther sites are going.
pls help. Could it be that you may have SPELLED Google INCORRECTLY ? (not goggle)

Cheersi have thesame problem as you are but in me friendster is the SITE that i cant open pls if you already solve the problem, kindly pls tell me thanksDd u MKE a spllin mstakkke wen yu typd teh adrss ??Quote from: Dairyman on June 05, 2008, 05:40:02 AM

Dd u mke a spllin mstakkke wen yu typd teh adrss ??

I work in an office which is about to get a new system in on our computers..
Its called Conveylink.
Before this though we've been told of how our computers need to be networked using 'Microsoft Business Server 2000 or 2003'
I have scoured all SORTS of websites trying to obtain this and have failed to find anything.

Can anyone elaborate on this problem and explain to me exactly what 'Microsoft Business Server' actually is?

also known as Windows Server 2003
What are all the software requirements?1.Check the Minimum Requirements for ConveyanceLink
Software
§Microsoft Windows XP or above
§Microsoft Office 2003 or above
§Microsoft .NET Framework 2

HARDWARE
§Pentium 3 650Mhz CPU
§At least 1GB RAM recommended
§At least 100MB free HDD space

Server
§Microsoft Windows XP Professional, Microsoft Small Business Server 2000 or Microsoft Small Business Server 2003
§Must have Internet Information Services (IIS) 5 or above installed
§Due to compatibility issues, Windows Vista machines cannot be used as servers/host machines
TCP ports 80 and 1433 must be open inbound and outbound for CL8 to be able to synchronise with our server to keep the Progress website up-to-date and to send out texts and emails.

We have GOT all the requirments for software and hardware, it's just the server requirements....
According to those requirements you can use a Windows XP Pro box as the server.Windows XP Pro(fessional?) Box, what exactly is this?By the Way, this pack is going to be on approx' 7 or 8 computers, which i haven't had networked yet (although i'm led to believe that this isn't the most difficult of jobs)

But it's just the server requirements i struggle to understand..Quote from: ace11 on June 03, 2008, 03:22:10 PM

Windows XP Pro(fessional?) Box, what exactly is this?

By the Way, this pack is going to be on approx' 7 or 8 computers, which i haven't had networked yet (although i'm led to believe that this isn't the most difficult of jobs)

But it's just the server requirements i struggle to understand..

I want to know how can i access remote computer.Why? Nothing devious I hope...Quote from: Carbon Dudeoxide on May 30, 2008, 04:36:50 AM

Why? Nothing devious I hope...

How to access Router settings?


Quote

Change the "Basic transmission" to 1-2 mbps, and the TX rate to 2mbps. This is typically done by LOGGING in to the router's setup UTILITY, click on the "Wireless Tab," and then the "Advanced Wireless Settings" sub-tab directly below it.

how i can access the NETWORK DRIVE of other user through change in registry of computer by KNOWING only the username. moreover remember that i am also a user but not the administrator.


Quote

remember that i am also a user but not the administrator.

hello all,
pls HELP me my network PROBLEM.
my pc is often unable network connection.so i replace a new cable.But i have no network connection from other computer.My Network is connected with workgroup name.Local area connection sing is "enable".But at "view workgroup computer"I SEE my computer only.
pls help me someone .thank a lot.

Best regards,
greenMore info would be helpful. You have two computers that you want networked, right? What OS is on each of them? Are you using router in your network? Do you connect to the Internet through the router? Are you using a wireless connection for either computer? Can either computer see the other?

Do you get any error messages? If so, what do they SAY?Quote from: soybean on June 04, 2008, 08:23:05 AM

More info would be helpful. You have two computers that you want networked, right? What OS is on each of them? Are you using router in your network? Do you connect to the Internet through the router? Are you using a wireless connection for either computer? Can either computer see the other?

Do you get any error messages? If so, what do they say?

I'm new to this networking thing. At my job we have around 9 computers networked through a server. Boss was b*tching at me cos of my screensaver, he reckons that when it's running it slows down every puter on the network. Is this true? Or is he just p*ssed off at what it shows *, LOL. Oh, and does my having a few things on my desktop also slow down the network, or is that more BS?
Thanks in advance folks,
Lorri
* I run the XP screensaver which scrolls thru my pictures, one of which says 'Let me DROP everything and work on YOUR problem' something that I think the boss takes personally, LOL.Add a screen that states: The first myth of management is that it exists! (This greatly offended my operations manager at the time.)

I am not completely qualified to answer the question. Others here will TELL you for sure, but my instinct is the same as yours: most individual computer functions will not slow down the network.Nope, having a screensaver running, and having icons on your desktop certainly will not slow down the network. In fact, it wont even slow down your computer (Unless you had like, 500 icons somehow placed on your desktop... then it might be a slight issue)

But, you might want to KEEP in mind, your boss gets to decide how your computer usage is going to go, especially if the computer you are using belongs to the business. Having a screensaver with, say, family pictures, or pictures of could look unprofessional in a work environment, and that could be added reason for your boss giving you a hard time about it.

Thank you. That is what I thought, but I figured I'd ask here just to make sure. And what Aegis wrote, I'd already kinda figured that out, cos our Marketing Managers computer is so slow because of the huge amount of files she has, it can take up to 10 minutes to start up each day, but that never, ever impacted on mine or anyone elses, mine being the newest addition to the network as of October last year. Our marketing manager was quite ENVIOUS of how fast mine is, LOL.
Nah, this boss is our Ops Manager and he's been given grief about how many personal emails he sends each day (he also wastes time playing computer games,) and to cover his a*s he's hammering the staff on what we do . Funny how the owners didn't actually mind my screensaver, it's a series of photographs, mostly nature ones that were taken on tours they do, and then a couple of joke ones. h**l, I even have a George Clooney pic that the male owner joked about, so it's not coming from the owners, just the ops manager. Don't think I'll BOTHER starting up the screensaver again, it's not worth the grief from this particular individual. Thanks to you I have the satisfaction of knowing that he's all BS, LOL. I can live with that.
Thanks again,
Lorri.
I'd bet the marketing manager has every last e-mail ever sent or received, due to the CYA mentality prevalent in so many organizations. Had a manager whose laptop had to be "cleaned out" quarterly by the I/T guys because he'd wait till the whole system bogged down before he'd do anything to archive e-mail. I know I'm not telling you anything you don't live every day. I'm just amazed at how some people run businesses against one another. I know that manager was in trouble if he couldn't produce e-mail to support his positions or decisions.

Hi all,
My Dad is being very evil at the moment and won't let me access our network-shared music folder. The folder is stored on a 1TB Network- enabled external drive which can only be accessed via the network. He has locked it with a password and I am unable to guess it (even though I know about 8 of his current ones). I have tried numerous password cracking- uh... I mean 'Guessing' utilities, such as 'dfg NetBrute' which is specifically designed for this task, but does not have the right options (the folder/drive that needs to be cracked must be mapped into My Computer, but to do this a password is needed therefore it won't work). Google brings no help. Here are the specs:

My computer:
-Inspiron 6400
-Windows XP Media Center EDITION 2005 SP3
-1Gb RAM
-120Gb HDD
-Intel Core 2 Duo (1.70Ghz)
-Integrated wireless A/B/G network card
-Integrated LAN adaptor
-USB 2.0 (4 ports)
-Card reader

His computer:
-Asus (Unknown model)
-Windows Vista Ultimate SP1
-2Gb RAM
-250Gb HDD
-Intel Quad-Core (2.8Ghz)
-Integrated wireless A/B/G/N network card
-Integrated LAN adaptor
-USB 2.0 (5 ports)
-Card Reader
-BluetoothSorry. This is out of our bounds, we are not able to legally help you with a topic like this.

Your best option is to ASK your dad, who the drive BELONGS to if you can use it.

So, your dad just up and did this with no reason? I rather think not.

Perhaps the energy you've put into password cracking may be better utilized by determining how you may better get along with your dad. I don't know the situation, and MAYBE it's truly not fair; however, you'll find (with few exceptions) that a lot of life CONSISTS of getting along with PEOPLE who have influence over you.OK. I understand what your saying. I'll talk to him and see if we can come up with an AGREEMENT.

I have IIS (v. 5.1) running on my computer. I can access it fine from my computer or another computer on my network but can't access it from a computer over the internet. I have disabled my firewall on Windows XP and forwarded the port from my router but the connection still TIMES out. Connection TIMEOUT is set to 900 seconds. I made sure not to USE the 192.168.1.xxx IP I get from ipconfig and am using the IP address given by whatismyip.com. I am testing it by using a proxy to attempt to access that IP. I also had a friend use his computer to try to access it and it came up blank. HELP is greatly appreciated.Nevermind. I got it to work. I changed the port to port 82 and added exceptions for port 82 on the firewalls. I don't KNOW why that made a difference, but it did.

I'm running two machines, one XP Pro machine hardwired to the router, and one XP Home machine connected to the same router wirelessly. Both machines are on the same workgroup in the same subnet and can access the internet. The hardwired box is able to ping itself and the wireless box. The wireless box can ping itself, but not the hardwired box. Both computers have the same file sharing settings. The hardwired box has its Windows Firewall disabled, and the wireless box has the File and Printer Sharing exception enabled in the Windows Firewall settings. Disabling the Windows Firewall on the wireless box has no effect. The wireless box cannot view its own workgroup.

The following message appears when View Workgroup Computers is selected in the Explorer Window, "Workgroup is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. The list of servers for this workgroup is not currently available." I've tried editing the registry entries for NetBT\Parameters\nodetype and \dhcpnodetype, but no settings seem to make any difference.

Now this one is weird: I can get an "ipconfig /all" response on the wireless box, but attempting a "net view" with any options will result in the error code, "System error 6118 has occurred."

If anyone has any idea how to access the network from the wireless machine, please let me know. Below are the results from an "ipconfig /all."

Windows IP Configuration

Host Name . . . . . . . . . . . . : Minibox
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Wireless Network Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : LAN-Express AS IEEE 802.11g miniPCI
Adapter
Physical Address. . . . . . . . . : 00-0E-9B-80-95-48
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.10.102
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.10.1
DHCP Server . . . . . . . . . . . : 192.168.10.1
DNS Servers . . . . . . . . . . . : 192.168.10.1
Lease Obtained. . . . . . . . . . : Sunday, May 18, 2008 9:36:58 PM
Lease Expires . . . . . . . . . . : Sunday, May 25, 2008 9:36:58 PM1. Verify local connectivity.
a. Using "Start -> Run":
o Type "\\" without quotes in Open DIALOG box of Start->Run and hit Enter key. For example, "\\Tecumseh". Does window open showing shared resources of the wired computer?
o If no luck, try again with "\\"; e.g. "\\192.168.10.101".

b. Using "ping":
o Ping uses the ICMP protocol for both the request and the response, so either disable the Windows Firewall (both wired and wireless computers) or modify settings to allow access to the request and response. Maybe the ICMP "Settings" BUTTON on Advanced tab of Windows Firewall?
o Ping IP address of wireless computer (yourself); e.g. "ping 192.168.10.102"
o Ping IP address of router IP address; e.g. "ping 192.168.10.1"
o Ping IP address of wired computer;e.g. "ping 192.168.10.101"
o Ping of wired computer; e.g. "ping Tecumseh"

c. Check TCP/IP configuration for wired, wireless, and router machines:
o Using TCP/IP protocol; probably should be TCP/IP over NetBIOS to faciliate computer browsing.
o Must all be on same network; apparently "192.168.10.xxx".
o All using Subnet Mask of "255.255.255.0".
o Wired and wireless using Gateway address "192.168.10.1" which should be the LAN IP address of your router.

So... Can you successfully communicate from the wireless computer to the wired computer?

2. Generally home network users complain about two things:
a. Unable to share files and/or printers.
b. Cannot see all of my workgroup computers.

3. Unable to share files and/or printers. Is your wired Windows XP Pro machine setup for "Simple" or "Advanced" file sharing?

Is the guest account active for network connections?
Quote

In User Accounts (available from Control Panel-User Accounts) the Guest account is off by default. However this setting only applies to the ability to log on the local computer using the Guest account. Simple file sharing relies on guest access to shared folders and printers. To verify that the Guest account is active for network access, do the following:

1. Log on to Windows XP with an administrator account.

2. Click Start, click Run, type cmd, and then press ENTER.

3. In the Command Prompt window, type net user guest, and then press ENTER.

4. If the account is active, a line appears in the output of the command that states Account active Yes.

5. If the account is not active, type net user guest /active:yes and then press ENTER.

6. Type exit and press ENTER to close the Command Prompt window.

We uploaded a flash video on our website with an embedded player to our server. Have done 9 shows so far and no problems. Now on our 10Th show everyone can see our video but our router is blocking it . It downloads or buffers maybe 20mb of a 100 mb video then stops. We unhooked the router and hooked 1 computer to our cable modem and behold our video will play but when the router is back in place it again gets stopped part way through. We have replaced the router with first a brand new SMC router and again with a D-Link router both did not solve the problem. The video plays fine locally on our network but once it is uploaded we can't view it but we have checked around and others including our ISP and our server people can see it on our website. Is this a coding or port problem coming back at our router or a security issue coming back at our router ? Help please !!! Really embarrassing when clients come to our office and we can't show them our work. The website is www.peopleinconnection.com Check it out. If with the computer directly connected to internet it works fine and with router it does not work, than the problem is on the router (router SETTINGS or router MALFUNCTIONING).
What SMC router?
I'm watching your video now using a very cheap router between my computer and internet network. No problem. Video completely buffered to my computer, the download is finished (I have a pretty good connection to internet), now is playing, reached almost 40% with no glitch.
Now it's at 90%, no problems. Man, I hate that YELLOW banner (Event alerts).Thank you so much for the help but we have solved the problem . Upset because we went through three routers before figuring it out. Turns out that the software we were using to convert and shrink the video [so it was not 5.2 gigs ] was changing the coding SOMEHOW. We COULD view it locally but after it was uploaded and we tried to view it the coding problem was hitting the router. We fixed it by using a different software to shrink and convert the video to around 120 mbs and we have not had any issues so far . Still can't figure out why after doing 9 conversions that the 10th time would do this?
But all is well and we appreciate your help.

Can anyone TELL me how to set up permissions/ privileges so only one other computer on my network of 20+ computers can see/ access a specific drive, as it used to be a direct network connection but the computers were separated. Both computers are PCs and are running Windows XP (Professional, i believe)
Any ideas?
Thanks

LukeHello!

Right click on the specific drive you WANT to share, choose sharing.
Tick the button "Share this folder". Then set the permissions by clicking "Permissions".

If "Everyone" si selected, delete it and then click "Add".
Type the name of the computer you want to share the drive with and click "Enter".
After you set the permissions for that computer, click "Apply" then "OK".


Good luck and KEEP us posted! In order to see that, you will need to turn off "use simple File sharing" if its not off yet.

You can do that in the explorer -> tools -> folder OPTIONS -> view tap -> it should be in the list probably the complete last.

Jonas

I USE Linksys wireless-G 2.4GHz Broadband router model WRT54GL, OS windows XP SP2. when I connect it to the power source, the power LED blinks, Ethernet LEDs 1 to 4 and Internet LED GOES on without any connection to them, even when I connect the internet cable it doesn't show a sign of connection and I cannot find the wireless router from my SYSTEMS enen the ethernet cable doesn't connect my systems. I tried using the reset buttom but it doesn't work the LED are still on without a connection and the power LED blinks, the CISCO Systems light doesn't work.

Hello FRIENDS,

I am using RDP for client server communication with windows terminal SERVICER... have a problem with one of the client mechine when it connects with server by using RDP all taskes are working fine except printer.... i.e., HP All-in-one, Lazer jet printer 3050 and 5610 models even i installed the same printer driver which PRESENT in client mechine....... can any one plese tell me where i did mistake....

When i am trying to take control to a client mechine which is present in the internet by using the connect option on the taskmanager user list properties it si not allowing ... even through i am giving the wright password and remote access is allowed by client.......can any one please tell me..... is there any other possiablity for this problem ( i mean to takeover the system from internet)Are you using the Microsoft- supplied Remote Desktop Connection? (Comes with Windows XP and higher)yes, for client'sOK. When the window is open, make sure that you can see the options. Click on local resources and hit the more button. Make sure that every check box is selected. If one is deselected, select it! If it is all selected, try connecting again. If this does not work, uh... wait for another reply from someone else!logmein.com offers a free remote desktop service that works WELL.

I am trying to implement site-to-site, pptp VPN. I believe I have everything set, but when I go to CONNECT the calling ROUTER to the answering router, I get the error message:

"Access was denied because the username and/or password was invalid on the domain"

Thing is, I'm pretty sure it's the right username/password COMBINATION. Any IDEA what could be doing this? Could the problem be in Active Directory?hi
I want to know is your network connect with domain name only?

Hey,

I have a router, but it doesn't work..... so i use a wireless card in the MAIN DESKTOP to route the internet to the others in the house. Up until now this system has worked but recently my wireless connection constantly disconnects and when i try and disable/enable the connection so that it will work again, It SOMETIMES (sometimes is getting more and more common) doesn't let me do this and the only way to get it working again is to restart the computer.

I am wondering what to do to get it working properly again please

Your help and time would be greatly apprecciated.

Regards

NicheReplace the router

Alan <>< Niche, there could be many reasons for wireless disconections; the most vicious is interference. Maybe another wireless router in your area started to work, maybe you are using 802.11 b wireless and the new router around uses 802.11 n protocols.

When you LAST reinstalled windows on that computer?kk thanks, but on the topic of interference. I live on 500 acres of property and the closest person to myself would be 3km away at least.
Windows on the routing computer has never been reinstalled. Just STAYED on there and updated itself frequently.
Regards
NicheIf you can, try again with another router. If it works, than the router is "MAD", that's for sure Maybe he is defective (needs replacement or flash update).Do you have a near wireless telephone? Try to change the channel of transmission of your wireless cardIf he (Niche) will change the channel transmission, he will have to do the same thing to all the wireless equipment in his network.

Niche, interference could appear from many sources, there are many sources of "noise" in that frequency. I thought about another wireless router, but it could be an electric oven or other electrical appliances.

My significant other and I live in different CITIES. He uses a MAC and I have a PC. Is there a way that we can ACCESS the files on each other's computers or even remotely access the desktop of each other's computer?

Thanks!
Yes there is.....but it does cost you few $$$ , you will NEED a software service called "logmein" see URL:
https://secure.logmein.com/products/pro/

Free version of this software does not support MAC file transfer but all other function will be there and if you want to transfer file between the computers then you need the pro version.

Hope this helps.

CheersFor mac: HTTP://www.apple.com/support/downloads/appleremotedesktop21client.html
For pc (windows): http://www.realvnc.com/products/download.html

Port forwarding if necessary - there may be needed a few settings on the mac side so it can be CONTROLLED from the pc.

For file transfer choose another solution (ftp, mail, other).

I am working in company , in which intranet had been used , i want know the status print job given by me .and i also want know the priority given to print job.....and i have another one doubt ,why intranet speed is always 100 mbps .I think we need some more information here. What print job are we talking about?

Have a look HERE

Quote

...and i have another one doubt ,why intranet speed is always 100 mbps .

I am working in company , in which intranet had been used , i want know the status print job given by me .and i also want know the priority given to print job.....and i have another one doubt ,why intranet speed is always 100 mbps .

A few days ago i got an old BayStack Switch.
I REALY don't know how to get the thing working.

Some one told me that I have to ftp on to it, but I dont realy know the IP adress,
is there a possibility to restet it to factory defaults, or locate the ipnumber by using some ip scanner or anything?

It's just for fun purpose to see if it works.24T comes in few flavor......is it a Ethernet Switch on Ethernet ROUTER Switch?

Check the solution provided on this URL:
http://www.intranetjournal.com/ix/msg/55457.html

I have an older Cisco Managed Switch and that's exactly how I got around changing the CONFIGURATION (DB9 to DB9 but instead of Hyper Terminal I used ProComm terminal application)

Hope this helps.

CheersQuote from: piaaz on June 11, 2008, 10:45:51 AM

24T comes in few flavor......is it a Ethernet Switch on Ethernet Router Switch?

Check the solution provided on this URL:
http://www.intranetjournal.com/ix/msg/55457.html

I have an older Cisco Managed Switch and that's exactly how I got around changing the configuration (DB9 to DB9 but instead of Hyper Terminal I used ProComm terminal application)

Hope this helps.

Cheers

I want to know how to connect two computers to transfer data.Assuming your moving files and data to a new PC: http://www.microsoft.com/windowsxp/using/setup/getstarted/bott_fstw.mspx

On another NOTE...if the computers are on the same network...just MAKE SURE you share the folders on the computer you're transferring data from and just copy the files you want to the other computer.

It really depends on what you're trying to do...In control panel open network and internet connections and then network connections and the local area connection and the follow the STEPS in wizard.Here's a HANDY guide: http://www.saviourpc.com/setting_up_home_network

So, my internet was fine until TODAY. I booted up the computer and it told me a network cable was unplugged, and the wi-fi was down. The actual router is downstairs, though my computer is plugged directly into the wall. The downstairs computer is down as well, for now I'm piggybacking the NEIGHBOR's wi-fi but I've checked all the CABLES and nothing is unplugged.

Also odd is the router had a single green light when I went down and checked, and I switched the power on and then off and now there are four lights on that are alternating between red and orange. My INITIAL guess would be that there is a PROBLEM with the router, as its lights don't seem to be quite as active as they customarily are. But then if my guess was entirely valid I wouldn't be here right now.

Thanks in advance. Connect computer straight to the modem, bypassing router.
You may also call ISP, and they can ping your modem, to see, there is no line problem.

ok so i have this just to block some spyware and stuff and it says washington university and north CAROLINA reaserch and education NETWORK and university of kansas and EHTZ swiss fedral INSTITUTE of technology zurich and toyohashi university of technology
what could all these be and why are they trying to access my computer!?? i just got one for a HOTEL! the hilton hotel Where does it say this?

Moooooooooore Info

windows xp hardware in sig


[Saving space - attachment deleted by admin]You have adware/trojans/other garbage on your computer.

Solutions: AVIRA, avast, avg (free antiviruses for home) - for now I could solve with avira what I couldn't solve with avast/avg (EVEN under Linux!)

Spybot search and destroy and Lavasoft Ad-Aware are other applications you should use to disinfect your computer.ok then thanks i will defintally use those and scan to get all the bad stuff outYou could also post your HJT Log Here and some of the people who specialize in cleaning computers of malware could help you.

Has anyone been brave and tried WORKING with windows server 2008 and what are their experiences with it...I don't know if this is still relevant or not but I'll give you my thoughts on it such as they are.

I have used Server 2008 and it is good. There are obviously differences in the set up from 2003 but nothing major from what I can remember. I was using it as a domain controller, DNS, DHCP server, WEB server, VPN server and it was running a mail server. My only complaint about it would be that IIS would suddenly stop working halfway through the day and the only way I could get it running again was to restart the whole thing, this happened every day for about 4 weeks before I went back to 2003. This MAY have been solved by now with updates.
If I remember rightly the only reason I went back to 2003 was because there was not an awful LOT of support for 2008 around on the net and there was STUFF that wouldn't run properly on IIS.

i just bought a computer and it has a card in it and i was told it is a wireless modem. i ran a program called belarc advisor here is the results what do i need to do to get the internet on my computer, i am not familar with computers so please be patient if you tell me what to do step by step i am using a public computer to get help



_______________________________________ _
The license associated with the Belarc Advisor product allows for free personal use only. Use on multiple computers in a corporate, EDUCATIONAL, military or government installation is prohibited. See the license agreement for details. The information on this page was created locally on your computer by the Belarc Advisor. Your computer profile was not sent to a web server. Click here for more info.


_______________________________________ _

About Belarc

SYSTEM Management Products

Your Privacy



In page Links:

Installed Hotfixes

Software Licenses

Software Versions













System Security Status
CIS Benchmark Score



1.88 of 10




Virus Protection



Up-to-date




MICROSOFT Security Updates



45 missing
(or more)†





† Advisor security definitions are out of date. Click here for the latest definitions.
_______________________________________ _

Computer Profile Summary
Computer Name: John-0qqk7ipq7d (in MSHOME)
Profile Date: Saturday, June 14, 2008 10:23:01 PM
Advisor Version: 7.2v
Windows Logon: terri


Click here for Belarc's System Management products, for large and small companies.


Operating System System Model
Windows XP Professional Service Pack 2 (build 2600) Gateway E-4200
System Serial Number: 0016379071
Chassis Serial Number: 0016379071
Processor a Main Circuit Board b
450 megahertz Intel Pentium III
32 kilobyte primary memory cache
512 kilobyte secondary memory cache Board: GATEWAY Tabor MP440BX Tabor 4000444-304
Serial Number: B
Bus Clock: 100 megahertz
BIOS: Intel Corp. 4M4PB0X1.15A.0033.P21 11/30/1999
Drives Memory Modules c,d
8.44 Gigabytes Usable Hard Drive Capacity
4.75 Gigabytes Hard Drive Free Space

CDWRITER IDE5232 [CD-ROM drive]
DVD-16X DVD-ROM BDV316E [CD-ROM drive]
3.5" format removeable media [Floppy drive]

QUANTUM FIREBALL CR8.4A [Hard drive] (8.46 GB) -- drive 0, s/n 128913511170, rev A5U.1200, SMART Status: Healthy
128 Megabytes Installed Memory

Slot 'J6J1' has 64 MB
Slot 'J6J2' has 64 MB
Slot 'J7J1' is Empty
Local Drive Volumes

c: (NTFS on drive 0)8.44 GB4.75 GB free

Network Drives
None detected
Users (mouse over user name for details) Printers
local user accountslast logon
Administrator
6/2/2005 1:22:53 PM(admin)
Guest
8/26/2005 8:35:37 PM
terri
6/14/2008 10:13:52 PM(admin)
local system accounts
boy
6/14/2008 10:10:05 PM(admin)
HelpAssistant
never
SUPPORT_388945a0
never

Marks a disabled account; Marks a locked account hp officejet 5500 serieson USB001
Microsoft Office Document Image Writer Driveron Microsoft Document Imaging Writer Port:

Controllers Display
Standard floppy disk controller
Intel(r) 82371AB/EB PCI Bus Master IDE Controller
Primary IDE Channel [Controller]
Secondary IDE Channel [Controller] Velocity 128 [Display adapter]
Sampo KM-718 [Monitor] (15.7"vis)
Bus Adapters Multimedia
Intel(r) 82371AB/EB PCI to USB Universal Host Controller Creative AudioPCI (ES1371,ES1373) (WDM)
Game Port for Creative
Communications Other Devices

802.11g Wireless PCI Card
Physical Address: 00:E0:98:D0:D1:33
Intel(R) PRO/100+ Management Adapter
Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
PS/2 Compatible Mouse
USB Root Hub
COBY MP3 Player
Virus Protection [Back to Top]

AVG Anti-Virus 7.0.394 Version 7.0.394
Realtime File Scanning On

Missing Microsoft Security Hotfixes [Back to Top]

These required security hotfixes (using the 02/12/2008 Microsoft Security Bulletin Summary) were not found installed. Note: CIS benchmarks require that Critical and Important severity security hotfixes must be installed.
Q918118- Important (details...)

Q919007- Important (details...)

Q920213- Critical (details...)

Q920670- Important (details...)

Q920683- Critical (details...)

Q920685- Moderate (details...)

Q922819- Low (details...)

Q923191- Critical (details...)

Q923414- Important (details...)

Q923980- Important (details...)

Q924270- Low (details...)

Q924496- Moderate (details...)

Q924667- Important (details...)

Q925398- Critical (details...)

Q925902- Critical (details...)

Q926255- Important (details...)

Q926436- Important (details...)

Q927779- Critical (details...)

Q927802- Important (details...)

Q928255- Important (details...)

Q928843- Critical (details...)

Q929123- Important (details...)

Q930178- Critical (details...)

Q931261- Critical (details...)

Q931784- Important (details...)

Q932168- Critical (details...)

Q933729- Important (details...)

Q935839- Critical (details...)

Q935840- Critical (details...)

Q936021- Critical (details...)

Q936181- Critical (details...)

Q936782- Important (details...)

Q937894- Moderate (details...)

Q938127- Critical (details...)

Q938829- Critical (details...)

Q941202- Critical (details...)

Q941568- Critical (details...)

Q941569- Critical (details...)

Q941644- Critical (details...)

Q943055- Critical (details...)

Q943460- Critical (details...)

Q943485- Important (details...)

Q944533- Critical (details...)

Q944653- Important (details...)

Q946026- Critical (details...)


Installed Microsoft Hotfixes [Back to Top]

Internet Explorer 6
SP1
KB890923-IE6SP1-20050225.103456 on 5/25/2005 (details...)

Internet Explorer
SP2
(SP2)
Office Professional Edition 2003
KB842532[SP]
on 5/25/2005 (details...)

KB873381
on 5/25/2005 (details...)

KB885828
on 5/25/2005 (details...)

KB894384
on 5/25/2005 (details...)

KB896607
on 5/25/2005 (details...)

Windows Media Player 10
KB911565
(details...)

KB917734_WMP10
(details...)

SP0
KB911565
on 2/16/2006 (details...)

KB917734_WMP10
on 6/17/2006 (details...)

Windows Media Player
SP0
KB911564
on 2/16/2006 (details...)

Windows XP
SP2
KB811113[SP]
on 6/17/2005 (details...)

SP3
KB873333
on 6/17/2005 (details...)

KB873339
on 6/17/2005 (details...)

KB883939
on 6/18/2005 (details...)

KB885250
on 6/18/2005 (details...)

KB885835
on 6/17/2005 (details...)

KB885836
on 6/17/2005 (details...)

KB886185
on 6/18/2005 (details...)

KB887742
on 6/18/2005 (details...)

KB888113
on 6/17/2005 (details...)

KB888240
on 7/30/2005 (details...)

KB888302
on 6/17/2005 (details...)

KB890046
on 6/18/2005 (details...)

KB890175
on 6/17/2005 (details...)

KB890859
on 6/17/2005 (details...)

KB891781
on 6/17/2005 (details...)

KB893066
on 6/17/2005 (details...)

KB893086
on 6/17/2005 (details...)

KB893756
on 8/10/2005 (details...)

KB893803V2
on 5/25/2005 (details...)

KB894391
on 8/10/2005 (details...)

KB896358
on 6/18/2005 (details...)

KB896422
on 6/18/2005 (details...)

KB896423
on 8/10/2005 (details...)

KB896424
on 11/10/2005 (details...)

KB896428
on 6/18/2005 (details...)

KB896688
on 10/24/2005 (details...)

KB896727
on 8/10/2005 (details...)

KB898461
on 6/29/2005 (details...)

KB899587
on 8/10/2005 (details...)

KB899588
on 8/10/2005 (details...)

KB899589
on 10/22/2005 (details...)

KB899591
on 8/10/2005 (details...)

KB900485
on 4/25/2006 (details...)

KB900725
on 10/22/2005 (details...)

KB901017
on 10/22/2005 (details...)

KB901190
on 2/16/2006 (details...)

KB901214
on 7/12/2005 (details...)

KB902400
on 10/24/2005 (details...)

KB903235
on 7/12/2005 (details...)

KB904706
on 10/24/2005 (details...)

KB905414
on 10/24/2005 (details...)

KB905749
on 10/22/2005 (details...)

KB905915
on 12/17/2005 (details...)

Windows XP
SP3 (continued)
KB908519
on 1/14/2006 (details...)

KB908531
on 4/14/2006 (details...)

KB910437
on 12/17/2005 (details...)

KB911280
on 6/17/2006 (details...)

KB911562
on 4/14/2006 (details...)

KB911567
on 4/14/2006 (details...)

KB911927
on 2/16/2006 (details...)

KB912812
on 4/14/2006 (details...)

KB912919
on 1/6/2006 (details...)

KB913446
on 2/16/2006 (details...)

KB913580
on 5/12/2006 (details...)

KB914388
on 7/14/2006 (details...)

KB914389
on 6/17/2006 (details...)

KB916281
on 6/17/2006 (details...)

KB916595
on 7/14/2006 (details...)

KB917159
on 7/14/2006 (details...)

KB917344
on 6/17/2006 (details...)

KB917953
on 6/17/2006 (details...)

KB918439
on 6/17/2006 (details...)



Click here to see all available Microsoft security hotfixes for this computer.

Marks a security hotfix (using the 02/12/2008 Microsoft Security Bulletin Summary)

Marks a security hotFix that fails verification (a security vulnerability)

Marks a hotfix that verifies correctly

Marks a hotfix that fails verification (note that failing hotfixes need to be reinstalled)
Unmarked hotfixes lack the data to allow verification


Click here for Belarc's System Management products, for large and small companies.


Software Licenses [Back to Top]


Belarc - Advisor6b3b26fd
iMeshBar - barms127
Microsoft - Internet Explorer55274-648-8637434-23122 (Key: 7QVT6-T2738-WRKJB-YKRFQ-XVK98)
Microsoft - MediaPlayer69808-544-6868491-04061
Microsoft - Office Professional Edition 200373931-640-0000106-57208 (Key: GWH28-DGCMP-P6RC4-6J4MT-3HFDY)
Microsoft - WebFldrs XP12345-111-1111111-56852
Microsoft - Windows XP Professional55274-648-8637434-23122 (Key: 7QVT6-T2738-WRKJB-YKRFQ-XVK98)

Software Versions (mouse over * for details, click * for location) [Back to Top]

Adobe Acrobat Version 7.0.5.2005092300 *
Adobe Reader Version 7.0.7.2006011300 *
America Online, Inc. - AOL Instant Messenger Version 5.9.3797 *
Belarc, Inc. - Advisor Version 7.2v *
Cinematronics - 3D Pinball Version 5.1.2600.2180 *
Elite Communications Inc. - MX240a Version 1.00.0729 *
Gaim *
GRISOFT, s.r.o. - AVG 7.0 Anti-Virus System Version 7.1.0.349 *
GRISOFT, s.r.o. - AVG Anti-Virus System Version 7.1.0.385 *
Hewlett-Packard Company - hp coretech (COmponent REuse TECHnology) Version 1.76.0 *
Lavasoft Ad-Aware SE SE 106 *
Microsoft (r) Windows Script Host Version 5.6.0.8820 *
Microsoft Application Error Reporting Version 11.0.5515 *
Microsoft Clip Organizer Version 11.0.6361 *
Microsoft Corporation - Internet Explorer Version 6.00.2900.2180 *
Microsoft Corporation - MSN Messenger Version 7.5.0322 *
Microsoft Corporation - Office SOURCE Engine Version 11.0.5525 *
Microsoft Corporation - Windows Installer - Unicode Version 3.1.4000.1823 *
Microsoft Corporation - Windows Movie Maker Version 2.0.3312.0 *
Microsoft Corporation - Windows® NetMeeting® Version 3.01 *
Microsoft Corporation - Zone.com Version 1.2.626.1 *
Microsoft Data Access Components Version 3.525.1117.0 *
Microsoft Office 2003 Version 11.0.6502 *
Microsoft Office Document Imaging Version 11.0.1897.0 *
Microsoft Office InfoPath Version 11.0.6357 *
Microsoft Office Outlook Version 11.0.6353 *
Microsoft Office Picture Manager Version 11.0.5510 *
Microsoft Office Save My Settings/Profile Wizard Version 11.0.5510 *
Microsoft(R) Windows Media Player Version 10.00.00.3646 *
Mozilla Corporation - Firefox Version 1.5.0.2 *
Serif PhotoPlus Version 6, 0, 0, 3 *
Yahoo! Messenger Version 8,0,0,506 *

_______________________________________ _
* Click to see where software is installed.
a. Megahertz measurement may be inaccurate if other programs were busy during last analysis.
b. Data may be transferred on the bus at one, two, or four times the Bus Clock rate.
c. Memory slot contents may not add up to Installed Memory if some memory is not recognized by Windows.
d. Memory slot contents is reported by the motherboard BIOS. Contact system vendor if slot contents are wrong.
e. This may be the manufacturer's factory installed product key rather than yours.
Copyright 2000-7, Belarc, Inc. All rights reserved.
Legal notice. U.S. Patents 6085229, 5665951 and Patents pending.

_______________________________________ _

Aegis, that's perfectly fine approach.Most of the time when PEOPLE ask for HELP, I KICK over to an empty browser window and execute a search. In this case, Snapfiles was the first RESPONSE! So what do you guys CONCLUDE , what should I download?

Hi all: I am a newbie, so sorry if this question has been asked before. I manage a small computer network that has a varied OS's I currently have a Windows 2000 machine that will not let me connect to the server because it says that the internal clock has a different time than the server, contact the system admin? I can't EVEN log on to the computer LOCALLY because i don't know the admin password.....HELP anyone! Thanks BobbiYou'll need to figure out the local password and change the time.Since it's win2k you could try to start in the recovery console. It'll give you a command prompt. There you can use the following command to change the time:

time 10:15Why not just change the time from the BIOS?I ran into this problem one time and turned out the computer was trying to connect to the wrong domain. Switched to the correct one and got right in. You could also try to get in, in safe mode.He has no administrator rights on his machine. He will have to "hack" the administrator account and make the NECESSARY adjustments.or he could ask the computer administrator, who probably already fixed it, as the op hasn't replied since he created the topic a month ago.
Why do people never check POST dates. Quote from: michaewlewis on June 16, 2008, 04:46:31 PM

or he could ask the computer administrator, who probably already fixed it, as the op hasn't replied since he created the topic a month ago.
Why do people never check post dates.

Hi all,

I have my own company for computer hardware solution..
but i need some help from ROUTER master..

Problem : I have setup one office with dlink switch.. There are two switches.. One is with 8 SLOT and second is with 16 slots..and have two different connections of internet.. but one of the connection is not working proper.. so pls help how i setup this switches so I can solve this problem..

Any other guidance appreciated.. pls i want to rectify this problem quickly.. so help me SOON..
ummm, need more info. You have 2 separate internet connections, and each switch is a gateway? Is this all on one network, or two networks? What are the ip addresses of the respective switches, are you RUNNING dhcp, and from where?It sounds like you should just bridge the switches together and drop one of the internet connections.

We will need more info on your system to accurately understand whats going on.Quote from: davidtuffel on June 17, 2008, 05:15:02 AM

Problem : I have setup one office with dlink switch.. There are two switches.. One is with 8 slot and second is with 16 slots..and have two different connections of internet.. but one of the connection is not working proper.. so pls help how i setup this switches so I can solve this problem..

Hello,

What's the best way to HOOK a printer with only a USB INTERFACE to a WIRELESS router. I want to get rid of my desktop computer since no one uses it anymore. Laptops rule.

Thanx

Daveyou can use a wireless print SERVER or wired print server also.There are routers with software for small print servers, access points with software for small print servers or even wireless print servers that allow connecting usb printers.

ok i have a belkin g + mimo router and a dell computer connected to it by LAN and my ccomputer which has wireless when i go to edit the settings by typing in the ip address about only 1/3 of the page shows up on the dell that is connected by lan the WHOLE thing loads and stuff both have xp home before this happened i was messing with the settings and was trying to make it more secure so only certian mac addressess could access it and i entered mine and it didnt work and i had no internet so i had to reset the router from the dell what could be causeing this to so that? i ran ccleaner before this which removes all of your cookies and all of your temporary stuff and tried on ie and did the same thing (IM using firefox) any way i can fix this?ok i LIED it is both computers! i have internet but no way to access the config thing! so i cant add security! help!!!!!!!!!!! Follow the manufacturers instructions to reset the router back to factory defaults.tried it and btw i can get to the page 1s when i unplug the router and plug it back in but if i need to get to it again i need to keep unplugging itso you set up mac address filtering and now you can't access the router.... right? Did you also change the password?
try a hard reset of the router. Check the manual for how to do it. Some ROUTERS employ a combination of holding the reset button down and powering off the device, waiting a couple seconds, powering on the device and then stop holding the reset button. This will erase all previously configured options.
If a hard reset doesn't work, the router may need to be replaced/returned.i changed mac address filtering couldnt get wireless reset router now only see 1/3 of config page ill try too do a hard reset

Hello!

I'm doing an assignment for ITE, in which we have to deisgn a smart home. We are asked what passive and active infrastructure is required, however, I have no idea what these are, and our teacher is away, and we have had reliefs who aren't IT teachers.

Does anyone know this, and are they willing to share? Thanks!I'm poking around now, DOUGLAS. I have some ideas, but I don't want to "say" much, yet. I used to work in telecomm, and I never heard those terms. Let me see what I can find...

Here's a start: http://www.tradingmarkets.com/.site/news/Stock%20News/1312297/

From the article:

Quote

So far, Indian telecom companies were permitted to share only passive infrastructure such as towers, repeaters, shelters and generators. Active infrastructure sharing will allow operators to use all key electronic components including ANTENNAS, feeder cables, nodes, radio access network, transmission systems and backhaul, with the exception of spectrum. ET had reported about DoT giving its nod to the active infrastructure sharing policy in its edition date February 21.

"Active infrastructure sharing will be limited to antenna, feeder CABLE, Node B, Radio Access Network (RAN) and transmission system only. Sharing of the allocated spectrum will not be permitted. The licensing conditions will be suitably amended wherever necessary to permit such sharing," the DoT said in a statement.

Put simply, the DoT announcement means that apart from spectrum (radio frequencies), telcos can now share all physical infrastructure.

The policy will give a boost to the new entrants who have bagged licences for telecom operations who can now share both active and passive infrastructure of existing players and launch services within a short SPAN. The quick rollout is likely to trigger off a fresh tariff war which may lead to cuts in call rates.

Passive infrastructure sharing refers to sharing of physical sites, buildings, shelters, towers, power supply, and battery backup.

Active infrastructure sharing, in addition, involves access to common antenna, feeder cable, Node B, radio access network (RAN), and transmission system. Sharing of allocated spectrum, however, is not allowed as of now.

Passive Infrastructure Sharing Passive Infrastructure sharing is nothing but sharing non-electronic infrastructure at cell site. Passive Infrastructure is becoming popular in telecom industry world wide.

Active Sharing Active sharing is nothing but sharing electronic infrastructure.

Here is my problem I have a laptop that is wireless and want to let my buddy use it. He is fighting cancer and is board and sick all the time. I have a wireless router to connect my network and he only lives about a half mile away. Can he hook up to my network using the laptop to browse the INTERNET from his house?......sure could use some help here..............thanks........two-dogs Wait, let me understand the question.
Basically you want to use the wireless network half a mile away?
I don't see how that is possible...there is a way to modify the wireless antennas so they can shoot that far. IIT involves a lot of hardware hacking and adding things to each device. In the long run, it would probably be easier to buy a SYSTEM that can work at that distance already. CHECK out www.trangobroadband.com and www.enterasys.com. These systems work at very long distances (at work, I have two POINTS set up that are 15 miles apart) but are also very expensive. It would be cheaper to pay for his isp. or hook up a really big anntenna wow that things are expensivee

Quote from: Carbon Dudeoxide on June 09, 2008, 08:35:52 PM

Friendster LOOKS like a Facebook type site. Is it possible the sites are blocked?

Quote from: Carbon Dudeoxide on June 09, 2008, 08:35:52 PM

Friendster looks like a Facebook type site. Is it possible the sites are blocked?

Friendster was actually the leading social networking site for teens until MySpace became popular.

so it allows me to ask someone a question or tell them something at ridiculous hours of the night (like right now)

Quote

so it allows me to ask someone a question or tell them something at ridiculous hours of the night (like right now)

What are you doing up at 4:20AM???

I BOUGHT a new wireless router and I must connet to the internet using a ethernet cable to set it up.

I can connect to the internet using wireless card but when I try the ethernet cable, it doesn't work.

The computer detects that I connected the ethernet cable. Everything actually looks like it works, but i can't SEE webpages and the setup said that there is a problem with my CONNECTION.

any advice would be appreciated.what does it say the problem is? when you see the message, CLICK on it for more infothe setup just says that there is a problem, nothing specific.

the wireless (that works) and the ethernet cable used the same internet. weird thing is that ethernet cable method doesn't work.where does it say there's a problem? is there a popup with a button you have to press or is it a little bubble down in the corner of the screen?
Open your Network Connections in CONTROL Panel and double click on the icon that says Local Area Connection (or similar). This will bring up a status window with two tabs, open the second tab and click Details. In the window that appears, do all of the "Properties" have a "Value"?all the properties have value except the last two

DNS server and WINS serverSee on the router options if he received a DNS value (WAN IP settings or something like that).

If the router has no DNS memorized, connect a computer directly to ISP router/modem and see what settings he receives. Note the DNS address (you find it in the output of ipconfig /all command); connect back the wireless router; set up the DNS addresses on each computer with the values you found on the computer connected directly to the ISP equipment.The when i use the old router, I do get a DNS value but not a WINS value