Saved Bookmarks
| 1. |
A table has three legs that are 1.00 m in length and a fourth leg that is longer by d - 0.50 mm, so that the table wobbles slightly. A steel cylinder with mass M = 290 kg is placed on the table (which has a mass much less than M) so that all four legs are compressed but unbuckled and the table is level but no longer wobbles. The legs are wooden cylinders with cross - sectional area A = 1.0 cm^(2), Young's modulus is E = 1.3xx10^(10)N//m^(2). What are the magnitudes of the forces on the from the floor ? |
|
Answer» Solution :We take the table plus steel CYLINDER as our system. The situation is like that in Fig. 12-1, except now we have a steel cylinder on the table. If the tabletop remains level, the legs must be compressed in the following ways : Each of the short legs must be compressed by the same amount (call it `Delta L_(3)`) and thus by the same force of magnitude `F_(3)`. The single long leg must be compressed by a LARGER amount `Delta L_(4)` and thus by a force with a larger magnitude `F_(4)`. In other words, for a level tabletop, we must have `Delta L_(4)=Delta L_(3)+d`. From Eq. 12-3, we can relate a change in length to the force causing the change with `Delta L = FL//AE`, where L is the original length of a leg. We can USE this relation to replace `Delta L_(4)` and `Delta L_(3)` in Eq. 12-6. However, note that we can approximate the original length L as being the same for all four legs. Making those replacements and that approximation gives us `(F_(4)L)/(AE)=(F_(3)L)/(AE)+d`. We cannot solve this equation because it has two unknowns, `F_(4)` and `F_(3)`. To get a second containing `F_(4)` and `F_(3)`, we can use a vertical y axis then write the balance of vertical forces `(F_("net,y")=0)` as `3F_(3)+F_(4)-Mg=0`, where Mg is equal to the magnitude of the gravitational force of the system. (Three legs have force `F_(3)` on them.) To solve the SIMULTANEOUS Eqs. 12-7 and 12-8 for, say, `F_(3)`, we first use Eq, 12-8 to FIND that `F_(4)=Mg-3F_(3)`. Substituting that into Eq. 12-7 then yields, after some algebra, `F_(3)=(Mg)/(4)-(dAE)/(4L)` `=((290 kg)(9.8 m//s^(2)))/(4)` `-((5.0xx10^(-4)m)(10^(-4)m^(2))(1.3xx10^(10)N//m^(2)))/((4)(1.00m))` `=548N ~~ 5.5xx10^(2)N`. From Eq. 12-8, we then find `F_(4)=Mg-3F_(3)=(290 kg)(9.8 m//s^(2))-3(548 N)` `~~1.2 kN`. You can show that the three short legs are each compressed by 0.42 mm and the single leg by 0.92 mm. |
|