An earthen pitcher loses 1 g of water per minute due to evaporation. If the water equivalent of pitcher is 0.5 kg and the pitcher contains 9.5 kg of water, calculate the time required for the water in the pitcher to cool to `28^@C` from its original temperature of `30^@C` Neglect radiation effect. Latent heat of vapourization of water in this range of temperature is 580 cal/g and specific heat of water is `1 kcal//gC^(@)`

An earthen pitcher loses 1 g of water per minute due to evaporation. I

1.	An earthen pitcher loses 1 g of water per minute due to evaporation. If the water equivalent of pitcher is 0.5 kg and the pitcher contains 9.5 kg of water, calculate the time required for the water in the pitcher to cool to `28^@C` from its original temperature of `30^@C` Neglect radiation effect. Latent heat of vapourization of water in this range of temperature is 580 cal/g and specific heat of water is `1 kcal//gC^(@)`
Answer» Here water at the surface is evaporated at the cost of the water in the vessel losing heat. Heat lost by the water in the vessel `=(9.5+0.5)xx1000xx(30-20)=10^5`cal Let t be the required time in seconds. Heat gained by the water at the surface `=(txx10^-3)xx540xx10^3` `(L=540(cal)/(g)=540xx10^3cal//kg)` `:. 10^5=540t` or `t=185s=3min5s`

Discussion

No Comment Found

Related InterviewSolutions

A sinker of weight `w_0` has an apparent weight `w_1` when weighed in a liquid at a temperature `t_1 and w_2` when weight in the same liquid at temperature `t_2`. The coefficient of cubical expansion of the material of sinker is `beta`. What is the coefficient of volume expansion of the liquid.
Consider two rods of same length and different specific heats (`S_1` and `S_2`), conductivities `K_1` and `K_2` and area of cross section (`A_1` and `A_2`) and both having temperature `T_1` and `T_2` at their ends. If the rate of heat loss due to conduction is equal thenA. `K_1A_1=K_2A_2`B. `K_2A_1=K_1A_2`C. `(K_1A_1)/(S_1)=(K_2A_2)/(S_2)`D. `(K_2A_1)/(S_2)=(K_1A_2)/(S_1)`
If heat is supplied to a solid, its temperature (a) must increase (b) may increase (c) may remain constant (d) may decrease.
If head a supplied to a solid, its temperatureA. must increaseB. may increaseC. may remain constantD. may decrease
A copper block of mass `60kg` is heated till its temperature is increased by `20^(@)C` Find the head supplied to the block specific head capacity of `= 0.09 cal g^(-1)^(@)C`
In an industrial process 10 kg of water per hour is to be heated from `20^@C` to `80^@C`. To do this steam at `150^@C` is passed from a boiler into a copper coil immersed in water. The steam condenses in the coil and is returned to the boiler as water at `90^@C`. How many kilograms of steam is required per hour (specific heat of steam`=1 cal//g^@C`, Latent heat of vapourization`=540 cal//g`)?
Water at `0^@C` was heated until it started to boil and then until it all changed to steam. The time required to heat water from `0^@C` to `100^@C` is 5 min and the time to change boiling water to steam is 28 minutes. If the flame supplied heat at a constant rate, the specific latent heat of vaporisation of water (neglecting heat losses, container etc. is (in `J//g`). (specific heat of water s `=4.2 J//g` )A. 540B. 2268C. 2352D. 2356
A ball is droped as a floor from a height of `2.0m` After the collsion it rises up to a height of `1.5m` Assume thet `40%` of the machanical energy lost goes as thermal energy into the ball.Calculate the rise in the temperature of the ball in the colliation headcapacity of the ball is `800J K^(-1)`
Name three fossil fuels that emit carbon dioxide into the atmosphere
With the increase in carbon dioxide in the atmosphere the acidity of oceans will : (a) decrease (b) remain unaffected (c) increase (d) none of these

Discussion

No Comment Found

Related InterviewSolutions

Reply to Comment