Related InterviewSolutions

• If the stirrup spacing is equal to 0.75 times the effective depth of an RC beam. then the shear capacity of stirrup steel is equal towhere fy is strength and Asv is cross-sectional area of the stirrup steel.
• What is the moment capacity of an under reinforced rectangular RCC beam?
• A concrete beam of rectangular cross-section of 200 mm×400 mm is prestressed with a force of 400 kN at an eccentricity of 100 mm. The maximum compressive stress in the concrete is
• The flexural tensile strength of M25 grade of concrete in N/mm2 as per IS:456-2000 is _______.3.5
• While checking shear resistance of reinforced concrete beams for limit state of collapse as per IS:456, which one of the following nominal shear stress recommendations is to be adhered to?(Vu is shear force at vertical cross-section, 'b' and 'd' are overall breadth and effective depth of beam respectively)
• An RC structural member rectangular in cross section of width band depth D is subjected to a combined action of bending moment M and torsional moment T. The longitudinal reinforcement shall be designed for a moment Me given by
• The ultimate strength of the steel used for prestressing is nearly
• The profile of the centroid of the tendon is parabolic with a central dip. h.Effective prestressing force is P and the span L. What is the equivalent upward acting uniform load?
• For a beam cross section, width = 230 mm, effective depth = 500 mm, the number of rebars of 12 mm diameter required to satisfy minimum tension reinforcement requirement specified by IS-456:2000 (assume grade of steel as Fe500) is2
• When the tendon of a rectangular prestressed beam of cross-sectional area A is subjected to a load W through the centroidal longitudinal axis of beam, (where M = maximum bending moment and Z = section modulus) then the maximum stress in the beam section will be