Components of loudspeaker : A loudspeaker consists of permanent magnets, basket, voice cails, flexible supension & rigid speaker cone as shown in figure. Loudspeaker principle A light voice coil is mounted so that it can move freely inside the magnetic field of a strong permanent magnet. the paper cone is attached to the voice coil and attached with a flexble mounting to the outer ring of the support .Because there is a definite equilibrium position for the speaker cone and there is elasticity of the mounting structure, there is inevitably a free cone resonant frequency like of a mass on a spring. The frequency can be determined by adjusting the mass and stiffness of the cone and voice coil Working : The ratio drives a rapidly changing current through the coil. The current follows that vibrations of speech and the electromagnetic force follows the current changes, pushing the paper cone. Finally the air in front of the loudspeaker is set into vibration following the cone's motion, and sound waves are transmitted to the listener A voice coil in a loudspeaker has 40 turns of wire and loop-diameter 1 cm and the current in the coil is 1A. Assume that the magnetic field at each at the wire of the coil has constant magnitude 0.2 T and is directed at an angle 60^(@) from the normal to the plane of the coil as shown in figure. The magnitude and direction of magnetic force on the coil is