Design A Four-input Nand Gate Using Only Two-input Nand Gates. – InterviewSolution

1.

Design A Four-input Nand Gate Using Only Two-input Nand Gates.

Answer»

BASICALLY, you can tie the inputs of a NAND GATE together to get an INVERTER.

Basically, you can tie the inputs of a NAND gate together to get an inverter.

Discussion

No Comment Found

Related InterviewSolutions

Implement The Following Circuits:
Difference Between Synchronous And Asynchronous Reset?
You Have Two Counters Counting Upto 16, Built From Negedge Dff , First Circuit Is Synchronous And Second Is "ripple" (cascading), Which Circuit Has A Less Propagation Delay? Why?
The Circle Can Rotate Clockwise And Back. Use Minimum Hardware To Build A Circuit To Indicate The Direction Of Rotating?
Is It Possible To Reduce Clock Skew To Zero? Explain Your Answer?
Consider Two Similar Processors, One With A Clock Skew Of 100ps And Other With A Clock Skew Of 50ps. Which One Is Likely To Have More Power? Why?
What Is Difference Between Ram And Fifo?
In A 3-bit Johnson's Counter What Are The Unused States?
What Is Difference Between Setup And Hold Time. The Interviewer Was Looking For One Specific Reason, And Its Really A Good Answer Too..the Hint Is Hold Time Doesn't Depend On Clock, Why Is It So...?
How Will You Implement A Full Subtractor From A Full Adder?