For a series RL circuit , the charging time needed for an indicator cu – InterviewSolution

InterviewSolution

1.	For a series RL circuit , the charging time needed for an indicator current to reach 30% of its steady state value is given as 2 sec. If the value of R=5Ω, then the value of inductor will be ______ H. 28.036
Answer» For a series RL circuit , the charging time needed for an indicator current to reach 30% of its steady state value is given as 2 sec. If the value of $R = 5 Ω$ , then the value of inductor will be ______ H. 28.036

Discussion

No Comment Found

Related InterviewSolutions

Find the value of curent IX in the figure shown
Consider a circuit shown below,At steady state, the current through resistor is given by 15cost and the voltage across the inductor is 2sint .The RMS value of the current through the capacitor is
A two-port network is represented by ABCD parameters given by[V1I1]=[ABCD][V2−I2]If port-2 is terminated by RL, the input impendance seen at port-1 is given by
The power dissipated by the 10 Ω resistor in the circuit shown below is ______ W.3.32
The equivalent capacitance of the input loop of the circuit shown is
In figure, the value of R is
Find the voltage VX in the figure shown
The parameter h21 in terms of ABCD parameter is
The impedance seen by the source in the circuit in figure is given by
For the lattice circuit shown in the figure, ZB=j2Ω and Zb=2Ω. The value of the open circuit impendance parameters Z=[Z11Z12Z21Z22] are