Hopkinson’s test is suitable for ______________(a) Small machines only(b) Small and medium machines(c) All machines(d) Only large machinesI got this question in my homework.I'd like to ask this question from Hopkinson’s Test in portion Efficiency and Testing of DC Machines

Hopkinson’s test is suitable for ______________(a) Small machines on

1.	Hopkinson’s test is suitable for ______________(a) Small machines only(b) Small and medium machines(c) All machines(d) Only large machinesI got this question in my homework.I'd like to ask this question from Hopkinson’s Test in portion Efficiency and Testing of DC Machines
Answer» CORRECT answer is (d) Only LARGE machines The explanation is: A large variation of field currents is required for small machines, the FULL-load set speed is usually higher than the RATED speed and the speed varies with load. The full load in small machines cannot obtained by cutting out all the external resistances present in the generator field. Sufficient reduction in the motor field current is NECESSARY to achieve full-load conditions resulting in speeds greater than the rated value.

Discussion

No Comment Found

Related InterviewSolutions

In field’s test generator field and motor field are connected in ______________(a) Series(b) Parallel(c) Alternatively, series and parallel(d) Not connectedI had been asked this question during a job interview.The doubt is from Hopkinson’s Test topic in section Efficiency and Testing of DC Machines
Why field test is conducted even if Hopkinson’s test is present?(a) Instability of an operation(b) Possibility of run-away speed(c) Both instability and possibility of run-away speed(d) Field test is not conductedI had been asked this question in examination.This intriguing question comes from Hopkinson’s Test in chapter Efficiency and Testing of DC Machines
Hopkinson’s test gives _______________(a) Combined iron losses of two machines which can be separated(b) Combined iron losses of two machines which can’t be separated(c) Doesn’t include iron losses(d) Depends on actual setupI got this question in semester exam.My question is based upon Hopkinson’s Test topic in division Efficiency and Testing of DC Machines
Hopkinson’s test is suitable for ______________(a) Small machines only(b) Small and medium machines(c) All machines(d) Only large machinesI got this question in my homework.I'd like to ask this question from Hopkinson’s Test in portion Efficiency and Testing of DC Machines
For carrying out load test on Hopkinson’s test setup _________________(a) Actual load is needed(b) By changing field currents in two machines load can be changed(c) Can’t carry out(d) By changing the armature current test is carried outI have been asked this question in quiz.The question is from Hopkinson’s Test topic in division Efficiency and Testing of DC Machines
Hopkinson’s test is a regenerative test.(a) True(b) FalseThe question was asked in final exam.I want to ask this question from Hopkinson’s Test topic in chapter Efficiency and Testing of DC Machines
What will happen if field current of motor in Hopkinson’s test is decreased?(a) Current through motor armature will increase(b) Current through motor armature will decrease(c) Current through motor armature will remain constant(d) Motor armature current can’t be determinedI got this question in an international level competition.This is a very interesting question from Hopkinson’s Test topic in portion Efficiency and Testing of DC Machines
What will happen if field current of generator in Hopkinson’s test is increased?(a) Current through motor armature will increase(b) Current through motor armature will decrease(c) Current through motor armature will remain constant(d) Motor armature current cannot be determinedI have been asked this question during an interview.Question is from Hopkinson’s Test in section Efficiency and Testing of DC Machines
In Hopkinson’s test, two machines are connected in ______________(a) Series(b) Parallel(c) Can be connected in parallel or series(d) Two machines are not requiredThis question was addressed to me in a job interview.My query is from Hopkinson’s Test in chapter Efficiency and Testing of DC Machines
Hopkinson’s test requires ____________(a) One DC machine on which test is carried out(b) Two different DC machines(c) Two identical DC machines(d) Can be worked with one or two machinesI got this question during an internship interview.The origin of the question is Hopkinson’s Test topic in portion Efficiency and Testing of DC Machines

Hopkinson’s test is suitable for ______________(a) Small machines only(b) Small and medium machines(c) All machines(d) Only large machinesI got this question in my homework.I'd like to ask this question from Hopkinson’s Test in portion Efficiency and Testing of DC Machines

Discussion

No Comment Found

Related InterviewSolutions

Reply to Comment