I was getting ready to put my new drive in when the BIOS changed my video settings. I thought the video card was dead so I tested it and it works. But I can't find the BIOS setting that needs changed Pentium 4 Socket 478, BIOSTAR Board P4M80-M4, DDR RAM 1 GB, SATA Drives 160 GB 300 GB, HDA Digital X Mystique 7.1 Gold, Radeon X1300.What is your BIOS part number? You can determine the part number of your AwardBIOS by watching the screen after turning on your PC. While the PC's memory is tested you will see the release date, the part number, and other BIOS information at the bottom of the screen. USE the PAUSE key to stop the BIOS software execution.
You can find a manual here: http://www.phoenix.com/en/Customer+Services/BIOS/AwardBIOS/Setup+Information.htmI found it at the top. Phoenix-Award BIOS v6.00 PG, An Energy Star Alley P4M80-M4 (4M80M609 BS)I looked in the manual and couldn't find anything also looked on the site and didn't find any thing not sure what my intel chip # is?updated the chipset tried to disable the video in the hardware dievices, tried installing and unistalling the video card drivers. So I pulled the card out and tried an AGP won't fit so I took out the PCI video card and every is okay.