InterviewSolution
Saved Bookmarks
InterviewSolution
| 1. |
Solve : CD-ROM "CANT ACCESS M:DRIVE"? |
|
Answer» I HAVE CHANGED THE CD-ROM AND THE BELT AND GET THE SAME MESSAGE. MY COMPUTER SHOWS IT IS INSTALLED AND WORKING??? CANT FIND OUT WHAT IS WRONG. THE LIGHT COMES ON AND I CAN EJECT THROUGHT THE COMPUTER AND EVERYTHING, I JUST CANT GET ANYTHING TO RUN?? PLEASE HELP.Have you checked the master/slave jumper config on the back of the drive. There will be a small diagram above the jumpers, it will LIKELY show you which pins to put it on. If it is the only drive on the second ide controller then it will be set as master. Also if this doesn't work, go into your setup and examine the ide config. check for the cd-rom to be the secondary master. I have had this problem before and it is wierd that you can still send the eject command through the operating system. The light comes on because there is still power GOING to it and the drive is on. Hope I helped a little and please post back with anything you try, for my future reference. THANKS Neil |
|