1.

Solve : Computer Will Not Boot, No Beep At The Beginning And No Display?

Answer»

My computer has been working SINCE last night (no reason why). It would not give any beep to show that it was good loading and it did not give a picture to the screen. I then went and checked everything to see what was causing the problem. The first thing I tried was the ram which the computer doesn't even get far enough to detect the ram not being there (no spasmodic beeping). I then checked the HD and the CD Drive which both are working and make the proper noises when starting up (cd drive opens up and everythng and hard drive boots). The I tried the CPU by swapping my Pentium D 805 with my older Pentium 4 3.2 ghz cpu, this did not work EITHER. I tried the PSU to see if this was the problem but it was booting everything up so there was no trouble there either. The motherboard seems to be working because it GETS all of the fans to start up and it seems to detect the CD Drive and HD. Last but not least, the Video card was taken out and tested but that doesn't work either. I'm in desperate NEED, any suggestions would be appreciatiated.
Thank you for your time.Okay,you are down to resetting your CMOS/BIOS to defaults
by removing the CMOS Battery for a few minutes then re-install
it and try to boot.



nope didnt do nethingWell, do you also have onboard video ?

Did you check the PSU,or try another one?i have not yet checked the psu but it is only about 3 weeks old and has worked up until then, it also turns everything on (the fans spin, the hd boots, the cd drive opens and closes, and I can power up from the case. It just will not post.



Discussion

No Comment Found