Saved Bookmarks
| 1. |
Solve : Configuring ADSL modem from command prompt? |
|
Answer» Dear ipconfig masters , I want to configure my wire LAN connected ADSL modem from command prompt to access internet via wire connected broadband . I have to configure the IP address , gateway , DNS , enable DHCP . How can it be done from command prompt, please ? I have to configure the IP address , gateway , DNS , enable DHCP . C:\>ipconfig /? USAGE: ipconfig [/? | /all | /renew [adapter] | /release [adapter] | /flushdns | /displaydns | /registerdns | /showclassid adapter | /setclassid adapter [classid] ] where adapter Connection name (wildcard characters * and ? allowed, see examples) Options: /? Display this help message /all Display full configuration information. /release Release the IP address for the specified adapter. /renew Renew the IP address for the specified adapter. /flushdns Purges the DNS Resolver cache. /registerdns Refreshes all DHCP leases and re-registers DNS NAMES /displaydns Display the contents of the DNS Resolver Cache. /showclassid Displays all the dhcp class IDs allowed for adapter. /setclassid Modifies the dhcp class id. The default is to display only the IP address, subnet mask and default gateway for each adapter bound to TCP/IP. For Release and Renew, if no adapter name is specified, then the IP address leases for all adapters bound to TCP/IP will be released or renewed. For Setclassid, if no ClassId is specified, then the ClassId is removed. Examples: > ipconfig ... SHOW information. > ipconfig /all ... Show detailed information > ipconfig /renew ... renew all adapters > ipconfig /renew EL* ... renew any connection that has its name starting with EL > ipconfig /release *Con* ... release all matching connections, eg. "Local Area Connection 1" or "Local Area Connection 2" C:\>IPCONFIG only allows you to obtail the IP address information. It also allows some control over an active TCP/IP connection. To configure the IP settings mentioned in your post, you will need to use netsh. |
|