|
Answer» Is anyone here familiar with this system? It uses either the CA810 or the CA810E board.
I am trying to figure out the max processor I can upgrade to. Here is my thread on the Dell forum and another board.
http://www.dellcommunity.com/supportforums/board/message?board.id=dim_upghw&thread.id=99335&view=by_date_ascending&page=1
http://groups.msn.com/4pcexperts/general.msnw?action=get_message&mview=0&ID_Message=14143&LastModified=4675609260719373150
Can anyone here offer any answers?
Is this really the CA810E board and can I really go to a 1.0 or 1.1 Celeron?
Please help if you can. I really need to know whether this will work before I risk messing up the board.
PKPost an Everest report so we can see what board you have.
Then we can hopefully advise further.
It may be easier, as suggested on the Dell forum, to save the money towards a new motherboard, with a new CPU?Heres some system info from CPU-Z
-------------------------
CPU-Z version 1.37
-------------------------
Processors Information
------------------------------------------------------------------------------------
Processor 1 (ID = 0)
Number of cores 1
Number of threads 1 (max 1)
Name Intel Celeron
Codename Coppermine
Specification
Package Socket 370 FCPGA (platform ID = 4h)
CPUID 6.8.6
Extended CPUID 6.8
Brand ID 1
Core Stepping cC0
Technology 0.18 um
Core Speed 699.4 MHz (10.5 x 66.6 MHz)
STOCK frequency 700 MHz
Instructions sets MMX, SSE
L1 Data cache 16 KBytes, 4-way set associative, 32-byte line size
L1 Instruction cache 16 KBytes, 4-way set associative, 32-byte line size
L2 cache 128 KBytes, 4-way set associative, 32-byte line size
FID/VID Control no
Chipset
------------------------------------------------------------------------------
Northbridge Intel i810 rev. A3
Southbridge Intel 82801AA (ICH) rev. 02
Memory Type SDRAM
Memory Size 384 MBytes
CAS# 2.0
RAS# to CAS# 2
RAS# Precharge 2
Cycle Time (tRAS) 6
Bank Cycle Time (tRC) 8
DMI System Information
----------------------
manufacturer Dell Computer Corporation
product L700C
version unknown
serial unknown
UUID 99498292-4F2A11D5-B45F0010-83FDCE0D
DMI Baseboard
-------------
vendor Intel Corporation
model CA810E
REVISION AAA53824-302
serial 0002E0861246415N002M
MI Processor
-------------
manufacturer Intel Corporation
model Celeron(tm)
clock speed 700.0MHz
FSB speed 66.0MHz
multiplier 10.5x
And SysID:
SysId 2.0a By Morf (www.sysid.subnet.dk)
----------------------------------------
Cpu Vendor : GenuineIntel
Processor Socket/Slot : Socket 370 (FC-PGA) or (PPGA)
Processor : Intel Celeron 2 (0.18)
Cpu Clock : 697.73 MHz
FSB Clock : 66.45 MHz
Multiply : 10.5
Family : 6
Model : 8
Stepping : 6
Type : 0
Level 1 Cache : 32 K
Level 2 Cache : 128 K
Level 2 Cache speed : 1/1 of Cpu clock
Level 2 Cache speed : 697.72 MHz
Level 2 Cache letancy : 0
MMX Support : Yes
MMX+ Support : No
3DNOW! Support : No
3DNOW! 2 Support : No
SSE Support : Yes
SSE 2 Support : No
Chipset : Intel i810 (Rev. 03)
Physical memory : 384 Mb
Memory Clock : 100 MHz
Cas Latency : 2
Ras to Cas Delay : 2
Ras Precharge : 2
Windows Uptime : 18:14:05 and 0 Day's
Platform : Windows Whistler Ver. 5.1 Service Pack 2And PC Wizard:
PC Wizard 2006 Version 1.70
------------------------------------------------------------------------------------------
<<< Mainboard >>>
> Manufacturer : Dell Computer Corporation
>> General Information
Product : L700C
Version : Unspecified
Serial Number : Unspecified
Unique ID : 99498292-4F2A11D5-B45F0010-83FDCE0D
> Mainboard : Intel CA810E
>> General Information
Manufacturer : Intel Corporation (Intel)
Product : CA810E
Version : AAA53824-302
Serial Number : 0002E0861246415N002M
Support MP : No
J3J1 - Fan3
J7A1 - Configuration Jumper
> Chipset : Intel i810
>> General Information
NorthBridge : Intel i810
SouthBridge : 82801AA 8xx Chipset LPC Interface Bridge
>> NorthBridge Information
Architecture : HUB
Manufacturer : Intel
Codename : Whitney
Revision : A3
Bus Speed : 66.5 MHz
FSB Frequency : 66.5 MHz
>> Bus Information
Type : LPC Hub
Device : 82801AA 8xx Chipset LPC Interface Bridge
Revision : 02
Number of ISA Connectors : 0
Frequency : 8 MHz
Multiplier : 1/4x
DMA Speed : 4 MHz
Multiplier : 1/2x
>> Bus Information #0
Device : 82810 810 Chipset Memory Controller Hub
Device : 82810 810 Chipset Graphics Controller
Device : 82801AA 8xx Chipset Hub to PCI Bridge
Device : 82801AA 8xx Chipset LPC Interface Bridge
Device : 82801AA 8xx Chipset IDE Controller
Device : 82801AA 8xx Chipset USB Controllers
Device : 82801AA 8xx Chipset SMBus Controller
I have REMOVED information that did not appear to be relevant.
What motherboard is this? Is it the CA810 or the CA810E? Can the CA810E have the 810 chipset rather than the 810E? Does this matter?
Can I upgrade to a 1.0 or 1.1 Celeron?
The Everest report had too much information that I need to weed through before I post, but I can if you want me too.
PKsPEC's...SL5XT 1000 MHZ and SL5XU 1100 MHZ should work according to intel your motherboard will support 100 MHZ FSB CPU's.
Read the below website.
http://www.intel.com/support/motherboards/desktop/ca810e/sb/cs-012805.htm
Also, Read the below website.
http://www.intel.com/support/motherboards/desktop/ca810e/sb/cs-012801.htmI have seen that info.
But how do i confirm what board this is, and is it relevant?
PK
You can determine which motherboard you have by the Altered Assembly (AA) number or the BIOS version string. The label with the AA number is found near the edge on the top side of the motherboard. The BIOS version string appears in the main BIOS setup screen.
CA810 AA Numbers CA810E AA numbers
730959-xxx A01986-xxx
744854-xxx A01988-xxx
CA810 BIOS version CA810E BIOS version
8C1A100A.86A.xxxx.xxx CA81020A.86A.xxxx.xxx
Did you read the second link on my other reply?See Below.
http://www.intel.com/support/motherboards/desktop/ca810e/sb/cs-012801.htmI have been through this before.
As I mentioned in the other threads:
The AA # on this board is A53824-302.
The BIOS version that comes up at startup does say CA81020A.10A.0038.P12.0103071311 which does indicate the CA810E board.
I assume that the AA# is different since its a Dell board?
The big chip on the board just says "810." It also has "SL3P7" on it.
This and the system ID reports indicate that the board may be a CA810. Is that possible?
PK
|
