Solve : Error i dont know what it means?

1.	Solve : Error i dont know what it means?
Answer» hi guyz, my friend lately ask me to reformat his computer using windows xp sp2, first i do is cheking the BIos then everything is fine, the hardisk is seen inthe bios and also the dvdrom, then i start to reformat it, but after the windows is STARTING up after i accept the agreement it displays an error like this (152625Mb of Hardisk, 0 at Id, 0 at bus, 0 at Atapi)set up cannot CONTINUE, anyone help me what this error MEANS? is my hardisk gone wrong?but it has seen in the bios tnxhey i have a dell 1545 laptop an getting err. 2000-0146 can this be fix or just put a new hard drive in it i'm running vistaaccording to the Dell Support site, error code 2000-0146 indicates: DST Log contains previous error(s). This means that the drive is failing and needs to be replaced. Quote from: shuijin on October 18, 2010, 05:31:12 AM (152625Mb of Hardisk, 0 at Id, 0 at bus, 0 at Atapi)set up cannot continue, anyone help me what this error means? You are trying to INSTALL to a SATA disk. XP does not include SATA drivers, you need the maker's driver file on a floppy and you load them when it asks you to press F6 at the beginning of install. uhm can u please explain it to me clearly?i dont know what u mean about maker's driver file....You will need to go to the hard drive manufacturer's site and download the SATA drivers, this means you're going to have to determine the manufacturer of the drive, which can be found on the label on the drive. You will need to copy this driver onto something, a CD or floppy for example. Then as the Windows XP installation is starting, you will see at the bottom a prompt to press F6 to install additional drivers. Press F6 when you see this and put in the media with the driver when prompted. Once this driver gets loaded up, installation will be able to continue normally.

Answer»

hi guyz, my friend lately ask me to reformat his computer using windows xp sp2, first i do is cheking the BIos then everything is fine, the hardisk is seen inthe bios and also the dvdrom, then i start to reformat it, but after the windows is STARTING up after i accept the agreement it displays an error like this (152625Mb of Hardisk, 0 at Id, 0 at bus, 0 at Atapi)set up cannot CONTINUE, anyone help me what this error MEANS?

is my hardisk gone wrong?but it has seen in the bios

tnxhey i have a dell 1545 laptop an getting err. 2000-0146 can this be fix or just put a new hard drive in it
i'm running vistaaccording to the Dell Support site, error code 2000-0146 indicates: DST Log contains previous error(s). This means that the drive is failing and needs to be replaced. Quote from: shuijin on October 18, 2010, 05:31:12 AM

(152625Mb of Hardisk, 0 at Id, 0 at bus, 0 at Atapi)set up cannot continue, anyone help me what this error means?

You are trying to INSTALL to a SATA disk. XP does not include SATA drivers, you need the maker's driver file on a floppy and you load them when it asks you to press F6 at the beginning of install.

uhm can u please explain it to me clearly?i dont know what u mean about maker's driver file....You will need to go to the hard drive manufacturer's site and download the SATA drivers, this means you're going to have to determine the manufacturer of the drive, which can be found on the label on the drive.

You will need to copy this driver onto something, a CD or floppy for example. Then as the Windows XP installation is starting, you will see at the bottom a prompt to press F6 to install additional drivers. Press F6 when you see this and put in the media with the driver when prompted. Once this driver gets loaded up, installation will be able to continue normally.

Solve : Error i dont know what it means?

Discussion

No Comment Found

Related InterviewSolutions

Reply to Comment