hi friends,

i have a problem while connecting the front panel audio output sockets to the corresponding pins.
first, i have intel disktop board D101GGC.

front panel audio i/o port having following connectors(sockets) corresponding to pins

mic and one more jumbled with it, a return socket likewise and is unmarked.
ground(marked as G)
two , marked L and R ,connectors and both having their own jumbled  connectors and are unmarked.

i tried making connection according to the manual given at  http://www.intel.com/support/motherb.../CS-021718.htm

is on PAGE 38 of english manual. as below
Pin            signal name                 pin         signal name
1               mic                               2            aud_gnd
3               mic_bias                        4            aud_gnd
5               fp_out_R                       6            fp_return_R
7               aud_5V                         8            key
9               fp_out_L                       10           fp_return_L

and i have conneted as below

Pin            signal name                   pin      signal name
1               mic                                 2       G(marked)

3              jumbled with mic(unmarked) 4     

5               R(marked)                        6       jumbled with R(unmarked)

7                                                     8         

9               L(marked)                         10    jumbled with L(unmarked)


with all this microphone is working fine but  i cant here the audio output.


any suggestion
regards
  san

does your computer recognise it as being connected?

if you are unsure run "DXDIAG" and look under sound adapters

or POST up an everest log.

It could be a MATTER of reinstalling drivers for your chipset.rear port are working fine for i/o, i did run 'dxdiag' but it could not diagnize the problem.