So i recently installed a watt meter that came with a power supply i bought a good year AGO, and when i turned my COMPUTER back on it wouldnt go past the post screen. the screen looks like this.

Award Modular BIOS v6.00PG, An Energy Star Ally
Copyright © 1984-2004, Award Software, Inc.

GA-K8NSP F4

Main Processor : AMD Athlon™ 64 Processor 3400+



Press DEL to enter SETUP/Dual BIOS/Q-Flash, F9 For Xpress Recovery
10/06/2005-nForce-6A61CG0JC-00

I cannot enter any of those modes either when i press DEL or F9...I read on another forum that said to take the cmos battery out for 30 seconds but i tried that and nothing happend. Anybody have any ideas on what the problem is? i did try unplugging the new watt meter also.I'd borrow another PSU with at LEAST the same wattage or more and try that.Try booting from a floppy and going into bios and reset ESCD.I have the same board, your BIOS version is F4 is way out of DATE, now F13, however from the site FAQ's on how to use the F9 recovery go to http://uk.giga-byte.com/Support/Motherboard/FAQ_Model.aspx?FAQID=390&ProductID=1783&ClassValue=Motherboard