Solve : Help DRAM detect fail (Mainboard's problem)?

1.	Solve : Help DRAM detect fail (Mainboard's problem)?
Answer» Hi all I have a problem with my mainboard My mainboard's BIOS is AMI and the sound beep that I hear is 3 short. I check the AMI sound beep table (http://www.flazh.de/bios/english/beeps.htm). And found this problem is cause from Base 64K RAM failure. I try to solve this problem by replace old RAM but not solve the problem. Then remove all RAM but not solve the problem too. My mainboard is ECS p4vmm2 and here is the spec Chipset VIA ProSavageDDR P4M266A VT8235 North Bridge VIA VT8751A Socket Socket 478 Processor Types Pentium 4 Number of CPUs 1 Front Side Bus 533/400MHz Memory Type DDR Memory Channels Single Maximum Memory 2GB External Graphics AGP4X IGP VIA ProSavage 8 South Bridge VIA VT8235 Audio 6-channel IDE 133/100/66/33 SCSI None SATA None RAID None LAN 10/100 Firewire IEEE 1394a USB USB 2.0 Expansion Slots * 1 x AGP * 1 x CNR * 2 x PCI BIOS AMI Form Factor microATX I don't have any additional VGA or other cardYou still have a problem with bad ram,or wrong type ram. Have you tried memtest ? http://www.memtest.org/ QUOTE from: street1 on November 07, 2007, 08:24:09 PM You still have a problem with bad ram,or wrong type ram. Have you tried memtest ? http://www.memtest.org/ Thanks for your help. But when I write ISO file and try to boot it from CD it can't boot into memtest program. I test this memtest CD with VMWare and it works (VMWare's BIOS SETTINGS is boot from CD first) I don't sure that my ECS's BIOS settings is boot from CD first or not because I can't access the BIOS settings page. When I POWER on, my mainboard don't do anything and it still 3 short beep. I don't sure when this ERROR occurs, it makes me don't be able to access the BIOS's settings page or not. But thanks again for your help.

Answer»

Hi all I have a problem with my mainboard
My mainboard's BIOS is AMI and the sound beep that I hear is 3 short.
I check the AMI sound beep table (http://www.flazh.de/bios/english/beeps.htm).
And found this problem is cause from Base 64K RAM failure.
I try to solve this problem by replace old RAM but not solve the problem.
Then remove all RAM but not solve the problem too.

My mainboard is ECS p4vmm2 and here is the spec
Chipset   VIA ProSavageDDR P4M266A VT8235
North Bridge   VIA VT8751A
Socket   Socket 478
Processor Types   Pentium 4
Number of CPUs   1
Front Side Bus   533/400MHz
Memory Type   DDR
Memory Channels   Single
Maximum Memory   2GB
External Graphics   AGP4X
IGP   VIA ProSavage 8
South Bridge   VIA VT8235
Audio   6-channel
IDE   133/100/66/33
SCSI   None
SATA   None
RAID   None
LAN   10/100
Firewire   IEEE 1394a
USB   USB 2.0
Expansion Slots

* 1 x AGP
* 1 x CNR
* 2 x PCI

BIOS   AMI
Form Factor   microATX

I don't have any additional VGA or other cardYou still have a problem with bad ram,or wrong type ram.
Have you tried memtest ?

http://www.memtest.org/
QUOTE from: street1 on November 07, 2007, 08:24:09 PM

You still have a problem with bad ram,or wrong type ram.
Have you tried memtest ?

http://www.memtest.org/

Thanks for your help.
But when I write ISO file and try to boot it from CD it can't boot into memtest program.
I test this memtest CD with VMWare and it works (VMWare's BIOS SETTINGS is boot from CD first)
I don't sure that my ECS's BIOS settings is boot from CD first or not because I can't access the BIOS settings page.
When I POWER on, my mainboard don't do anything and it still 3 short beep.
I don't sure when this ERROR occurs, it makes me don't be able to access the BIOS's settings page or not.

But thanks again for your help.

Solve : Help DRAM detect fail (Mainboard's problem)?

Discussion

No Comment Found

Related InterviewSolutions

Reply to Comment