For cpu 1 and cp2 its usually in the 40 ish celcius and sometimes it reaches 50c, for some reason the flame/fire icon appears when it gets to 50c and i heard thats not good, I thought 50c is a good temperature?50 is fine...lookup yer specs just in case...
SPEEDFAN is just being cautious.In Speedfan, you can ADJUST the warning temperature when the flame symbol appears, for each core of your CPU. It's in Configure, on the Temperatures tab. By default it is 50 DEGREES C, which as Patio says, is an over-cautious figure for most if not all CPUs. Select a core and you can set the warning temperature. In the image below you can see I have set the Core 0 warning temperature to 70 C, which is a realistic figure for an i7 4790 CPU. Since you have not STATED your CPU type, we cannot advise what setting you might want to use.


Nice catch Salmon...i forgot it was customisable...Quote from: Salmon Trout on September 30, 2015, 11:54:28 AM

In Speedfan, you can adjust the warning temperature when the flame symbol appears, for each core of your CPU. It's in Configure, on the Temperatures tab. By default it is 50 degrees C, which as Patio says, is an over-cautious figure for most if not all CPUs. Select a core and you can set the warning temperature. In the image below you can see I have set the Core 0 warning temperature to 70 C, which is a realistic figure for an i7 4790 CPU. Since you have not stated your CPU type, we cannot advise what setting you might want to use.