Hi I have just installed a new B75M R2.0 MB into a new tower with a new CPU and HDD but I am having ISSUES in getting anything to show up on the Monitor all else seem fine like power getting to the cpu ect
 So I need help Ideas on what to do next the things I have done so far are replaced the ram replaced cables to the monitor and HDD and the disc drive so I just said no idea on what else to look for any help would be great Or even where else I can post for ideas Thanks
 
 Hi

Do you have a graphics card if so are you plugging the monitor into the card not the motherboard.

Do you have both power leads plugged into the motherboard ?

If you do have a graphics card try the motherboard on it's own without the card and the monitor plugged into the motherboard.

Re check the front panel connections where they plug into the motherboard that they are correct.

If you have any front usb ports plugged into motherboard perhaps try with those disconnected.

If still no go can you check that the keyboard lights flash and if you can toggle the caps lock light

 In addition to the queries above, it would also be helpful if you could post the whole system specs, including what CPU and RAM you're using, what PSU, what graphics card (if any) and so forth.
One possibility is that your CPU might not be supported by that motherboard, as there are several listed on the Asrock support SITE which require a BIOS update - popping in one of those CPUs with an older BIOS revision would cause the situation you describe, hence why I'm asking exactly what you're using.Hi thanks for the replies decided to take it down the repair shop
Thanks again