InterviewSolution
Saved Bookmarks
InterviewSolution
| 1. |
Solve : my modem won't go into the internet PLZ HELP? |
|
Answer» well my modem is connected to my linksys router and then connected to my computer but when i try to connect it does'nt go and when i put the diagnostics to see whats wrong it says "the network adapter local area connection is not correctly configured to use the ip protocol ive tried unpluging and plugging it restarting the computer and a bunch of stuff i've been looking to fix this in my freind's computer for days now but i have no solutions. and the solutions the computer give's is "Make sure your internet protocol bindings are correct:ensure that internet protocol version 4 (tcp/ipv4) and internet protocol version 6 (tcp/ipv6) are selected in the configuration for the network adapter local area connection but i did that and that still did'nt WORK and i think it's the computer because the internet works wirelessly thats how im online but the ethernet cord and wireless does'nt work on my computer only my freinds laptop.also when i put ip config it says network card ? how do i find out Just look at the back of your computer, if it's a SEPARATE card one of the EXPANSION slots will be used. If your network connection isn't on one of the expansion slots then the network connection is on your motherboard.Is your internet DSL/Satellite/Cable? May need to clone your MAC address to your router for Satellite/Cable (may not be the issue). Your computer has a hardware address called a MAC that never CHANGES, and therefore uniquely identifies your computer. When your Internet SERVICE Provider sets up your connection, they register your computer’s MAC address with their system. From that point on, your computer must identify to their system with its MAC in order to be allowed access to the Internet. Since your computer’s MAC is a unique address, any router that you might later set up as an intermediary between your broadband modem and computer(s) will have a different MAC. Your router’s MAC will be unknown to your ISP, and so they may deny Internet connectivity to your router. Have you made any configuration changes to the router if so may want to reset to factory. Can you connect to the internet by removing the router and connecting directly to the modem via cable? If yes then put the router back on following the instruction manual for the router. Turn on modem wait for all lights to come on and completely power on, then turn on the router wait for all lights to come on and completely power on, then computer see if you can access. |
|