Solve : Need your Advice for this...?

1.	Solve : Need your Advice for this...?
Answer» just recently i was cleaning my PC so I take some of its parts like the memory cpu, fan etc.. and especially the Power Led,,,after im done, I put all the parts back but sadly my pc wont start , it has no beep sound like it detect the memory the yellow Led wont display and the MONITOR will display no signal...but the fan is working fine... now i dont know what to do... I need your advice guyzzzzz what to do tanx Have you re-check every single component, making sure they are all plugged in and seated correctly?I'm guessing it's one of TWO things. Either a wire or component is loose or not connected or there was a static discharge when you handled the ram. Clearly it's difficult to DIAGNOSE without being in front of the system, but that's my best shot.yeah i ALREADY chek all the components but im having a second thought that maybe i shortcircuited the board? ....cz the green led at the front of the CPU casing wont display, or is there a way i fix it... my Motherboard is msi H55M-E32, i forgot where i put my manual Quote from: Allan on July 11, 2011, 06:56:14 AM I'm guessing it's one of two things. Either a wire or component is loose or not connected or there was a static discharge when you handled the ram. Clearly it's difficult to diagnose without being in front of the system, but that's my best shot. is there any hints how i able to know what the real problem is?example if i lossen to put back the memory or other components, what are the circumstances or any manuals so that i have an i dea of what realy the problem is tnxsss Did you use a Anti-static wrist strap and / or mat ?? Did you attempt to earth yourself with the case ??no.. but i discharge my self before holding the components , this is my second time to disassemble this Pc just now it happen it wont start after Then its a matter of trial and error. For example, if you have 2 RAM sticks, try them one at a time. If you have any in a spare machine, swap them out to see if they work...etc etcHere's Your Manual...Missplacing between the THREE conectors does also effect like this guyz (no signal)the Power LED , POwer Switch and the HDD Led cz i put exactly my other components no other things i think maybe i misplace this conectors and then i Power ON the PC then maybe its Shortcircuit?cz of wrong replacement tnxDLoad your Manual above...

Answer»

just recently i was cleaning my PC so I take some of its parts like the memory cpu, fan etc.. and especially the Power Led,,,after im done, I put all the parts back but sadly my pc wont start , it has no beep sound like it detect the memory the yellow Led wont display and the MONITOR will display no signal...but the fan is working fine... now i dont know what to do...

I need your advice guyzzzzz what to do tanx
Have you re-check every single component, making sure they are all plugged in and seated correctly?I'm guessing it's one of TWO things.

Either a wire or component is loose or not connected or there was a static discharge when you handled the ram. Clearly it's difficult to DIAGNOSE without being in front of the system, but that's my best shot.yeah i ALREADY chek all the components but im having a second thought that maybe i shortcircuited the board? ....cz the green led at the front of the CPU casing wont display, or is there a way i fix it... my Motherboard is msi H55M-E32, i forgot where i put my manual Quote from: Allan on July 11, 2011, 06:56:14 AM

I'm guessing it's one of two things.

Either a wire or component is loose or not connected or there was a static discharge when you handled the ram. Clearly it's difficult to diagnose without being in front of the system, but that's my best shot.

is there any hints how i able to know what the real problem is?example if i lossen to put back the memory or other components, what are the circumstances or any manuals so that i have an i dea of what realy the problem is

tnxsss
Did you use a Anti-static wrist strap and / or mat ??

Did you attempt to earth yourself with the case ??no.. but i discharge my self before holding the components , this is my second time to disassemble this Pc just now it happen it wont start after
Then its a matter of trial and error.

For example, if you have 2 RAM sticks, try them one at a time. If you have any in a spare machine, swap them out to see if they work...etc etcHere's Your Manual...Missplacing between the THREE conectors does also effect like this guyz (no signal)the Power LED , POwer Switch and the HDD Led cz i put exactly my other components no other things i think maybe i misplace this conectors and then i Power ON the PC then maybe its Shortcircuit?cz of wrong replacement

tnxDLoad your Manual above...

Solve : Need your Advice for this...?

Discussion

No Comment Found

Related InterviewSolutions

Reply to Comment