Hi, I have just built my computer with the FOLLOWING parts from ebuyer:


Corsair 2GB DDR2 667MHz/PC2-5400 Memory CL5 Lifetime Warranty
Arctic Cooling AC-FRZ-7P Freezer 7 Pro Socket 775 Processor Cooler
Intel Core 2 Quad Q6600 Energy Efficient 95W edition Socket 775 (2.40GHz) G0 Stepping L2 8MB Cache OEM Processor
Point Of View 8400GS 256MB GDDR2 DVI VGA HDCP ready PCI-E Graphics Card
LiteOn DH-20A4P-21C 20X DVD±RW/DL/RAM Black Bare Drive - OEM
ASUS P5K AiLifestyle Series iP35 Socket 775 eSATA 8channel Audio ATX Motherboard
Casecom Black Midi Tower Case With Front Panel LCD - No PSU
Scythe Kama-Meter Multifunction Fan Controller - 5.25" Bay
Samsung SpinPoint HD501LJ 500GB SATAII Hard Drive 16MB Cache - OEM
Sumvision 400W 20+4pin 80mm Fan PSU - With 1x SATA, ATX12V Connector - Retail Boxed

I try pressing the power button and nothing happens, there is a green light on the mobo but thats it, both power connectors are in, I have tried takening them out and putting them in, and tried removing the graphics card.

No fans start either, what could be wrong?

I have tried using a screw driver to start the computer, incase of a problem with the switchIf the power button doesnt work at the front of the case, verify that its cable is plugged into the correct "berg stix" location ( gold PINS ) Most newer motherboards have color coded berg stix Red, Blue, Green, Orange, Black ... to make plugging the correct cable into the correct setting on the berg stix on the motherboard.

Green led, means that it is powered, but not acknowledging the soft power boot function. The soft power button plugge dinto the wrong berg stix will do this!!

DaveHi, Im not sure what you mean by "berg stix" but it is in the correct socket in the mobo and I did SAY I have tried with a screw driver as well.

I have posted this on another forum, and most people think its a FAULTY PSU, so I was wondering what you guys think.