Hi


OK so i have this PC that will only SHOW an image on the Screen If i put the CMOS jumper Into Reset But if i put it on normal it wont show a image. IVE been told to change SETTING in CMOS Reset but the keyboard wont work

Also I Have A PCI Graphics Card And Even With That Plugged in It STILL Wont Work

Hoping Some One Could Help Me I'm LOST

Thanks
So when you plug your video card in and plug your monitor into the card, you don't get any image on the screen?
What happens when you take the video card out and plug the monitor into the onboard GPU?check your bios an make sure that you didnt get it disabled. Also, inserting any video cards will cause the pnp so it probably be turned off then.Hi JJ

When I Plug it into the Onbord Same Thing No image


Hi squall

I Whould On In To Bios If I Could See The Screen

Thanks

TRY takeing out the cmos battery that should default everything. Dam No Help
took it out for over ten minsIs there a viedo card that you can try an see if it works. Mite be that your on board has failed.replace the battery; if that doesn't help, it could be the PSU.