I cant seem to figure out how i have to do the wires for the power LED. i ALREADY got it to how it flickers if the HDD is doing something... But the downside is that it flickers from the light being off to the light being off again i hope you know what i mean.. and what bothers me that there are supposed to be 2 cables for the power LED and 2 for the HDD LED but besides the 2 power button wires I Only have 3 wires left... So I'm a little puzzled. i know that the green and blue wire's are for the power button but do you guy's know what the ground cable is from those two?

I'm posting links of pictures of how the wires are and the guide from the MoBo user maual.

Thanks

http://img402.imageshack.us/img402/1729/imag0108k.jpg

http://img189.imageshack.us/img189/6986/imag0109o.jpg

http://img30.imageshack.us/img30/4354/imag0110ix.jpgI don't know why that's wired the way it is. The LED's have no Commons (Gnd), the motherboard provides the resistors. The power button is a CONTACT closure (short circuit across the PINS).
You need:
2 for PLED
2 for +HD LED
2 for PWRBTN
2 for RESET (which many cases don't provide, but the motherboard does)
QUOTE from: Computer_Commando on May 05, 2010, 04:38:47 PM

I don't know why that's wired the way it is. The LED's have no Commons (Gnd), the motherboard provides the resistors. The power button is a contact closure (short circuit across the pins).
You need:
2 for PLED
2 for +HD LED
2 for PWRBTN
2 for RESET (which many cases don't provide, but the motherboard does)

yeah i know that... so theres no way i can make it possible so the light stays on and only flickers if the HDD does any activity?