Solve : Router problem?

1.	Solve : Router problem?
Answer» My computer is not detectting my router DG834 by going IE This what they told me what to do: connect the cable Check the lights Connecting through the IE by typing http://192.168.0.1 NOTHING It use to work before but not now I think i post this before but i forgot to reply Any solution :-? Make sure all plugs are plugged in. Unplug everything for about 10 seconds, then plug it all back in. This restarts the router and may find your connection.yeah i try that alot of times Is there any way i can detect the router by using someting? Does any members here ever had this problem? Why is my computer is not detecting my router through IE? Any Solution? Are you plugged into the correct ports? You need to access it through a wire, nor wirelessly also.There is only one AVAILABLE port and that is WANminiport (i think is called that) This router use ethernet connection and it must be connected throu IE Anyway There should not be a problem at all said the manufactureQuote My computer is not detectting my router DG834 by going IE This what they told me what to do: connect the cable Check the lights Connecting through the IE by typing http://192.168.0.1 NOTHING It use to work before but not now I think i post this before but i forgot to reply Any solution :-? Correct IP for most routers (unless you changed it in the router configuration). http://192.168.1.1 What is make and model number of router? Netgear DG834 ADSL Firewall Router with 4-port 10/100 Mbps Quote Netgear DG834 ADSL Firewall Router with 4-port 10/100 Mbps DSL modem/router combination Netgear DG834 Yeah is that router RIGHT but is not solving my problem First test - try pinging the router. Bring up a command prompt and type "ping 192.168.0.1" (if indeed that is the correct IP address for the router). If you get a response then the problem is with your firewall, probably, not your router. Try turning off your firewall (unplug the ADSL cable first) and then connecting. Can you do a hard reset of the router? (To restore it to factory defaults.) This should overcome the problem where you have changed the router's internal IP address. You can then FOLLOW the original installation procedure in your manual. If that doesn't work either, post again. There must be something wrong with your windows networking setup.I will try the pinging And my router can not be reset unless going in to the browserHey T-Chai, Netgear has a user forum. Have you ever used it? It's at http://forum1.netgear.com/support/ Also, here's a link to a Netgear support page: No Internet Using a DG632 or DG834 Series Router with Internal ModemI know i found a similar Post problem but it cannot SOLVE my question

Answer»

My computer is not detectting my router DG834 by going IE
This what they told me what to do:
connect the cable
Check the lights
Connecting through the IE by typing http://192.168.0.1
NOTHING
It use to work before but not now
I think i post this before but i forgot to reply
Any solution :-?

Make sure all plugs are plugged in. Unplug everything for about 10 seconds, then plug it all back in. This restarts the router and may find your connection.yeah i try that alot of times
Is there any way i can detect the router by using someting?
Does any members here ever had this problem?
Why is my computer is not detecting my router through IE?
Any Solution?
Are you plugged into the correct ports? You need to access it through a wire, nor wirelessly also.There is only one AVAILABLE port and that is WANminiport (i think is called that)
This router use ethernet connection and it must be connected throu IE

Anyway There should not be a problem at all said the manufactureQuote

My computer is not detectting my router DG834 by going IE
This what they told me what to do:
connect the cable
Check the lights
Connecting through the IE by typing http://192.168.0.1
NOTHING
It use to work before but not now
I think i post this before but i forgot to reply
Any solution :-?

Correct IP for most routers (unless you changed it in the router configuration).
http://192.168.1.1
What is make and model number of router?
Netgear DG834
ADSL Firewall Router
with 4-port 10/100 Mbps
Quote

Netgear DG834
ADSL Firewall Router
with 4-port 10/100 Mbps

DSL modem/router combination
Netgear DG834
Yeah is that router RIGHT but is not solving my problem
First test - try pinging the router. Bring up a command prompt and type "ping 192.168.0.1" (if indeed that is the correct IP address for the router). If you get a response then the problem is with your firewall, probably, not your router. Try turning off your firewall (unplug the ADSL cable first) and then connecting.

Can you do a hard reset of the router? (To restore it to factory defaults.) This should overcome the problem where you have changed the router's internal IP address. You can then FOLLOW the original installation procedure in your manual.

If that doesn't work either, post again. There must be something wrong with your windows networking setup.I will try the pinging
And my router can not be reset unless going in to the browserHey T-Chai, Netgear has a user forum. Have you ever used it? It's at http://forum1.netgear.com/support/

Also, here's a link to a Netgear support page: No Internet Using a DG632 or DG834 Series Router with Internal ModemI know i found a similar Post problem but it cannot SOLVE my question

Solve : Router problem?

Discussion

No Comment Found

Related InterviewSolutions

Reply to Comment