Saved Bookmarks
| 1. |
Solve : Setting Front Audio Header Connections?? |
|
Answer» Quote from: Frankie on June 03, 2008, 09:05:14 AM Quote from: squall_01 on June 02, 2008, 11:46:57 AMCant see the pic. hahaha I right clicked an there are jumpers placed on the board but I dont want it if I cant use the back connections. It is NOT a JUMPER. Jumper: Header: Okay thats a cmos jumper an yes the second part is right but there are the little black jumpers that you see on the back of ide drives on there. Two the sound card to my second pc is a HDA digital x mystique 7.1 gold, I looked at the manual an didnt see anything about how to set up the front auido to it, if its possible.I was just showing you the different between a header and a jumper. The front panel will plug onto the header as shown in the diagram I posted earlier. If the connector does not match that on the mother board, you have to cut the front panel's audio plug off and re-wire the ends into a connector that will fit, provided you can figure out what each wire is for and where to put them.Yes as you see I KNOW the DIFFERENCE but there are jumpers on the header. Sounds like to much work to do that but if I use that will it disable the back audio an the sound card to my second pc is a HDA digital x mystique 7.1 gold, I looked at the manual an didnt see anything about how to set up the front auido to it, if its possibleOk, now what's your second PC have to do with anything? Either there's something you didn't mention, or you're just confusing the situation.Cause it has front audio to and a sound card an you mention that I possiblely be able to HOOK it up to a card, i did previously state that. |
|