Solve : Signature Pro PC and HDD problem?

1.	Solve : Signature Pro PC and HDD problem?
Answer» Hello i RECENTLY got a Signature Pro w/ 4MB of ram and an intel i486 SX CPU (i cant remember the MH/z) from my uncle, i've tried starting it up but i soon discovered the HDD BLOWN a chip (after a loud pop and smoke pouring out of the chip D=, ILL replace the main board for that soon(=.=), and i've recovered all the data (= ) so i got 2 other HDD's one is a Western Digital Caviar 32500 2559.8 MB 5400 RPM and a Maxtor DiamondMax Plus 60 61.2 GB 7200 RPM The Maxtor DRIVE i've tried hooking it up to one of my PC's and comes up as CANOT LOCATE SECONDARY DRIVE (0) PRESS F1 TO CONTINUE F2 FOR SETUP. And the WD drive is fine but when i configure and hook it up to the OLD PC is goes to BIOS, usualy i have 1MB of video RAM but then goes to 256 KB of Video RAM, tests RAM, and says WAIT... and nothing happens! im stumped i want to hook up the MAXTOR to another PC and the WD to the signeture pro what do i do??? (>.<)

Discussion