My computer BSOD on me and then proceeded to fail at verifying DMI data pool. I have tried to boot from CD, but that has not worked. I've waited for 10 minutes for it to verify and NEVER worked.

The other problem is that the HDD is showing the remaining amount of space on the drive instead of the full amount of space the drive can hold. It is showing 135GB left when it is a 750GB HDD.What is new or different since the last time everything worked properly (ie, new hw, new sw, VIRUS, error, etc)?The only new thing is a new game, RB6: Raven shield. No new viruses or anything, well, none that came up so I guess it could be a virus.

Also, a little update. It now says the HDD is 0MB, and I have tried 2 other HDD and they both say 0MB, 1 actually started booting  the other didn't.  The one that started booting GOT to the windows logo then said not enough memory.You might want to run a diagnostic on your ram.How would I do that?

Also, I just loaded the fail-safe defaults and it now shows the correct size for my HDD, however it still sticks on verifying data pool.http://www.memtest86.com/Didn't have any blank CDs so I took a stick out too see if it changed anything and went past the verifying and stopped at AMD data change ... update new data to DMI! update success. And then I restarted and it stuck at verifying again. So I took out the other and replaced it with the first and it stuck at verifying again.I just reset the CMOS and the problem is still there.Did you run MemTest yet ? ?Ran memtest, no errors.On the screen it always stops at it says SMBus Cntrlr NA, I just noticed.Here are my specs:
    *
          o GIGABYTE GA-MA785G-UD3H AM3/AM2+/AM2 AMD 785G HDMI ATX AMD Motherboard
          o 1 x Rosewill RP600V2-S-SL 600W ATX12V v2.01 SLI Ready Power Supply
          o  AMD Athlon II X2 240 Regor 2.8GHz Socket AM3 65W Dual-Core Processor ADX240OCGQBOX
          o G.SKILL 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model F2-6400CL5D-2GBNQ
          o 1 x Western Digital Caviar Green WD7500AADS 750GB SATA 3.0Gb/s 3.5" Hard Drive -Bare Drive

Replace the CMOS battery...

Also re-install the MBoard chipset drivers...then re-boot.Replace the battery or just clear the CMOS? Because I have already cleared the CMOS.

Also, how would I re-install the mobo chipset drivers?Go to the website of your computer or mobo manufacturer and download and install the correct chipset driver for your system.