The Corrodibility of the metal in a corrosion test may decrease or increase as a function of time.(a) True(b) FalseI had been asked this question by my school principal while I was bunking the class.The doubt is from Testing topic in portion Corrosion Testing of Corrosion Engineering

The Corrodibility of the metal in a corrosion test may decrease or inc

1.	The Corrodibility of the metal in a corrosion test may decrease or increase as a function of time.(a) True(b) FalseI had been asked this question by my school principal while I was bunking the class.The doubt is from Testing topic in portion Corrosion Testing of Corrosion Engineering
Answer» Correct CHOICE is (a) True For explanation: Corrodibility of the metal is defined as the capability of being CORRODED. It may decrease or increase during the corrosion test as a function of TIME. It increases as it OWING to the formation of a protective layer or it decreases as it owing removal of the more resistant surface layer.

Discussion

No Comment Found

Related InterviewSolutions

Which of the following is/are the corrosion testing’s for stainless steels?(a) Warren test(b) Streicher test(c) Huey test(d) Warren test, Streicher test and huey testThe question was posed to me during an interview.Query is from Testing topic in division Corrosion Testing of Corrosion Engineering
Which of the following units are used in terms of penetration of pits on a metal?(a) Milligram sq. decimeter per day (MDD)(b) Mils per year (MPY)(c) Both MDD and MPY(d) Neither MDD nor MPYThis question was addressed to me in homework.The query is from Testing in division Corrosion Testing of Corrosion Engineering
Calculate the corrosion penetration rate of iron that corroding at an electrochemical corrosion rate of 1 microampere/sq. centimeters?(a) 0.212 mpy(b) 0.11 mpy(c) 0.46 mpy(d) 0.64 mpyI have been asked this question during an interview.My query is from Testing in section Corrosion Testing of Corrosion Engineering
Which of the following is/are the factors that affect corrosion testing?(a) Temperature(b) Dissolved oxygen(c) Nature of metal(d) Temperature, dissolved oxygen, and nature of metalThis question was posed to me in quiz.This question is from Testing in portion Corrosion Testing of Corrosion Engineering
The corrosion mechanism of polymeric and metallic materials are the same in all corrosive environments.(a) True(b) FalseI have been asked this question in exam.My doubt is from Testing in chapter Corrosion Testing of Corrosion Engineering
Which of the following metals in which corrosion decreases with an increase in temperature in oxygenated corrosive solutions?(a) Copper and its alloys(b) Steels(c) Cast irons(d) Aluminum and its alloysI got this question during an online exam.The question is from Testing topic in division Corrosion Testing of Corrosion Engineering
Which of the following type of corrosion tests are usually best and more desirable?(a) Laboratory testing(b) Pilot-plant testing(c) Both laboratory and pilot-plant testing(d) Neither laboratory nor pilot-plant testingThe question was asked by my school teacher while I was bunking the class.This intriguing question originated from Testing in division Corrosion Testing of Corrosion Engineering
What is meant by nomography for corrosion rates?(a) Formula oriented method to find corrosion rate(b) A rapid and ready conversion table for various corrosion rate units(c) Schematic arrangement of corrosion data with the change in temperature and concentration(d) A specific corrosion rate measurement methodThis question was addressed to me during an online interview.Question is taken from Testing in section Corrosion Testing of Corrosion Engineering
Which of the following is/are the causes for the bond rupturing in polymers?(a) Chemical reaction (oxidation)(b) Heat(c) Radiation (sunlight)(d) Chemical reaction, heat, and radiationI got this question in a job interview.Enquiry is from Testing topic in portion Corrosion Testing of Corrosion Engineering
A standard surface condition is also desirable and necessary to facilitate comparison with other results.(a) True(b) FalseThis question was posed to me in my homework.This is a very interesting question from Testing in chapter Corrosion Testing of Corrosion Engineering

The Corrodibility of the metal in a corrosion test may decrease or increase as a function of time.(a) True(b) FalseI had been asked this question by my school principal while I was bunking the class.The doubt is from Testing topic in portion Corrosion Testing of Corrosion Engineering

Discussion

No Comment Found

Related InterviewSolutions

Reply to Comment