The transfer function of a system is given by, V0(s)Vi(s)=1−s1+s. Le – InterviewSolution

InterviewSolution

1.	The transfer function of a system is given by, V0(s)Vi(s)=1−s1+s. Let the output of the system be V0(t)=Vmsin(ωt+j) for the input, Vi(t)=Vmsin(ωt) then the minimum and maximum values of j(in radians) are respectively
Answer» The transfer function of a system is given by, $\frac{V_{0} (s)}{V_{i} (s)} = \frac{1 - s}{1 + s} .$ Let the output of the system be $V_{0} (t) = V_{m} s i n (ω t + j)$ for the input, $V_{i} (t) = V_{m} s i n (ω t)$ then the minimum and maximum values of $j$ (in radians) are respectively

Discussion

No Comment Found

Related InterviewSolutions

The system shown in figure below.can be reduced to the form with
The transfer function of a compensator is given asGc(s)=s+as+bThe phase of the above lead compensator is maximum at ____ when a = 1 and b = 2
For a tachometer, if θ(t) is the rotor displacement in radians, e(t) is the output voltage and Kt is the tachometer constant in V/rad/sec, then the transfer function,E(s)Q(s) will be
The polar plot ofG(s)=10s(s+1)2intercepts real axis at ω=ω0. Then, the real part and ω0 are respectively given by:
The matrix of any state space equations for the transfer function C(s)/R(s) of the system, shown below in figure is
The transfer function of a compensator isgiven asGc(s)=s+as+bGc(s) is a lead compensator if
For the system governed by the set of equation:dx1dt=2x1+x2+udx2dt=−2x1+uy=3x1The transfer function Y(s)U(s) is given by
The transfer function of a plant is T(s)=5(s+5)(s2+s+1). The second-order approximation of T(s) using dominant pole concept is
A state space representation for the transfer function y(s)u(s)=s+6s2+5s+6 is ˙x=Ax=Bu, where A=[01−6−5],B=[01], and the value of C is
A unity feedback system has an open loop transfer function of the formKG(s)=K(s+a)s2(s+b);b>aWhich of the loci shown in figure can be valid rootloci for the system?