What Are The Rules That Must Be Kept In Mind While Designing Castings

1.	What Are The Rules That Must Be Kept In Mind While Designing Castings?
Answer» Some of the points that MUST be kept in mind during the process of cast designing are as follows: To avoid the CONCENTRATION of stresses sharp CORNERS and frequent use of fillets should be avoided. Section thicknesses should be uniform as much as possible. For variations it must be done gradually. Abrupt changes in the thickness should be avoided at all costs. Simplicity is the key, the casting should be designed as simple as possible. It is difficult to create true large spaces and henceforth large flat surfaces must be avoided. > Webs and ribs used for STIFFENING in castings should as minimal as possible. Curved shapes can be used in order to IMPROVE the stress handling of the cast. Some of the points that must be kept in mind during the process of cast designing are as follows:

What Are The Rules That Must Be Kept In Mind While Designing Castings?

Answer»

Some of the points that MUST be kept in mind during the process of cast designing are as follows:

To avoid the CONCENTRATION of stresses sharp CORNERS and frequent use of fillets should be avoided.
Section thicknesses should be uniform as much as possible. For variations it must be done gradually.
Abrupt changes in the thickness should be avoided at all costs.
Simplicity is the key, the casting should be designed as simple as possible.
It is difficult to create true large spaces and henceforth large flat surfaces must be avoided. > Webs and ribs used for STIFFENING in castings should as minimal as possible.
Curved shapes can be used in order to IMPROVE the stress handling of the cast.

Some of the points that must be kept in mind during the process of cast designing are as follows: